[Intel-gfx] FPS performance increase when deliberately spinning the CPU with an unrelated task

[Peter Clifton]

On Mon, 2010-10-25 at 13:20 -0700, Jesse Barnes wrote:
> On Mon, 25 Oct 2010 13:11:24 -0700
> Jesse Barnes <jbarnes at virtuousgeek.org> wrote:
> 
> > There are some bits in the GMCH to control memory behavior during CPU
> > C-states.  Can you dump the 16 bits at MCHBAR address 0xf08?  You
> > should be able to do that by doing I915_READ16(MCHBAR_MIRROR_BASE +
> > 0xf08).  Assuming bits 3:2 and 1:0 are nonzero, it may help to set them
> > all to 0.  That will disable several memory related power saving
> > features while the CPU is in a deep sleep state.
> 
> Oh and bits 5:4 and bit 6 as well.  Bit 6 controls whether memory stays
> active in C2, and bits 5:4 control which memory shutdown features are
> enabled in C2; clearing 5:4 will disable shutdown, as will bit 6.

Is there a document somewhere which describes those? I've downloaded the
GM45 datasheet, and it lists that address as "reserved".

FWIW. the answer is 0x730f

(I hijacked one of the debugfs functions with this:)

	seq_printf(m, "PCJC2 DEBUG HACK MCHBAR_MIRROR_BASE + 0xf08:        %04x\n",
		   I915_READ16(MCHBAR_MIRROR_BASE + 0xf08));

I trust that is correct?

Converting to bin:

15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0
 0  1  1  1  0  0  1  1  0  0  0  0  1  1  1  1

                            ^  ^  ^  ^  ^  ^  ^
      Should I poke this 1? |  |__|  |__|__|__|
      Already clear is ok?_____|              |___ Will try these at 0


Just off the top of your head.. is there any way of poking these from
userspace without reloading kernel modules?


Disabling CPU frequency scaling is only half of the story, as it appears
keeping the CPU out of C4 is the main benefit. I was checking with
powertop when I was playing before. I don't see C2 on my machine, only
C0, C1 and C4 (the main resident state when not working).

I understand C4 is pretty rubbish for memory usage as it disabled bus
mastering is that what the graphics controller will require? 

Allegedly:

Your CPU supports the following C-states : C1 C2 C3 C4 C5 C6 
Your BIOS reports the following C-states : C1 C4 

:(


I'll wait your suggestions based on the above before I try poking the
register.

-- 
Peter Clifton

Electrical Engineering Division,
Engineering Department,
University of Cambridge,
9, JJ Thomson Avenue,
Cambridge
CB3 0FA

Tel: +44 (0)7729 980173 - (No signal in the lab!)
Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me)