[Intel-gfx] [PATCH 06/30] drm/i915: Drop non-HAS_PCH_SPLIT() code from ironlake_crtc_mode_set().
Chris Wilson
chris at chris-wilson.co.uk
Tue Apr 12 22:31:34 CEST 2011
From: Eric Anholt <eric at anholt.net>
Ironlake is where the PCH split started.
Signed-off-by: Eric Anholt <eric at anholt.net>
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
drivers/gpu/drm/i915/intel_display.c | 361 ++++++++++++++--------------------
1 files changed, 150 insertions(+), 211 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 834b2cf..a8497e5 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4932,7 +4932,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
struct fdi_m_n m_n = {0};
u32 reg, temp;
u32 lvds_sync = 0;
- int target_clock;
+ int target_clock, pixel_multiplier, lane, link_bw, bpp, factor;
list_for_each_entry(encoder, &mode_config->encoder_list, base.head) {
if (encoder->base.crtc != crtc)
@@ -4974,8 +4974,8 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
refclk / 1000);
} else if (!IS_GEN2(dev)) {
refclk = 96000;
- if (HAS_PCH_SPLIT(dev) &&
- (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)))
+ if (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base))
refclk = 120000; /* 120Mhz refclk */
} else {
refclk = 48000;
@@ -5034,140 +5034,137 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
/* FDI link */
- if (HAS_PCH_SPLIT(dev)) {
- int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
- int lane = 0, link_bw, bpp;
- /* CPU eDP doesn't require FDI link, so just set DP M/N
- according to current link config */
- if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
+ lane = 0;
+ /* CPU eDP doesn't require FDI link, so just set DP M/N
+ according to current link config */
+ if (has_edp_encoder &&
+ !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ target_clock = mode->clock;
+ intel_edp_link_config(has_edp_encoder,
+ &lane, &link_bw);
+ } else {
+ /* [e]DP over FDI requires target mode clock
+ instead of link clock */
+ if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
target_clock = mode->clock;
- intel_edp_link_config(has_edp_encoder,
- &lane, &link_bw);
- } else {
- /* [e]DP over FDI requires target mode clock
- instead of link clock */
- if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base))
- target_clock = mode->clock;
- else
- target_clock = adjusted_mode->clock;
-
- /* FDI is a binary signal running at ~2.7GHz, encoding
- * each output octet as 10 bits. The actual frequency
- * is stored as a divider into a 100MHz clock, and the
- * mode pixel clock is stored in units of 1KHz.
- * Hence the bw of each lane in terms of the mode signal
- * is:
- */
- link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
- }
+ else
+ target_clock = adjusted_mode->clock;
+
+ /* FDI is a binary signal running at ~2.7GHz, encoding
+ * each output octet as 10 bits. The actual frequency
+ * is stored as a divider into a 100MHz clock, and the
+ * mode pixel clock is stored in units of 1KHz.
+ * Hence the bw of each lane in terms of the mode signal
+ * is:
+ */
+ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+ }
- /* determine panel color depth */
- temp = I915_READ(PIPECONF(pipe));
- temp &= ~PIPE_BPC_MASK;
- if (is_lvds) {
- /* the BPC will be 6 if it is 18-bit LVDS panel */
- if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
- temp |= PIPE_8BPC;
- else
- temp |= PIPE_6BPC;
- } else if (has_edp_encoder) {
- switch (dev_priv->edp.bpp/3) {
- case 8:
- temp |= PIPE_8BPC;
- break;
- case 10:
- temp |= PIPE_10BPC;
- break;
- case 6:
- temp |= PIPE_6BPC;
- break;
- case 12:
- temp |= PIPE_12BPC;
- break;
- }
- } else
+ /* determine panel color depth */
+ temp = I915_READ(PIPECONF(pipe));
+ temp &= ~PIPE_BPC_MASK;
+ if (is_lvds) {
+ /* the BPC will be 6 if it is 18-bit LVDS panel */
+ if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP)
+ temp |= PIPE_8BPC;
+ else
+ temp |= PIPE_6BPC;
+ } else if (has_edp_encoder) {
+ switch (dev_priv->edp.bpp/3) {
+ case 8:
temp |= PIPE_8BPC;
- I915_WRITE(PIPECONF(pipe), temp);
-
- switch (temp & PIPE_BPC_MASK) {
- case PIPE_8BPC:
- bpp = 24;
break;
- case PIPE_10BPC:
- bpp = 30;
+ case 10:
+ temp |= PIPE_10BPC;
break;
- case PIPE_6BPC:
- bpp = 18;
+ case 6:
+ temp |= PIPE_6BPC;
break;
- case PIPE_12BPC:
- bpp = 36;
+ case 12:
+ temp |= PIPE_12BPC;
break;
- default:
- DRM_ERROR("unknown pipe bpc value\n");
- bpp = 24;
- }
-
- if (!lane) {
- /*
- * Account for spread spectrum to avoid
- * oversubscribing the link. Max center spread
- * is 2.5%; use 5% for safety's sake.
- */
- u32 bps = target_clock * bpp * 21 / 20;
- lane = bps / (link_bw * 8) + 1;
}
+ } else
+ temp |= PIPE_8BPC;
+ I915_WRITE(PIPECONF(pipe), temp);
- intel_crtc->fdi_lanes = lane;
+ switch (temp & PIPE_BPC_MASK) {
+ case PIPE_8BPC:
+ bpp = 24;
+ break;
+ case PIPE_10BPC:
+ bpp = 30;
+ break;
+ case PIPE_6BPC:
+ bpp = 18;
+ break;
+ case PIPE_12BPC:
+ bpp = 36;
+ break;
+ default:
+ DRM_ERROR("unknown pipe bpc value\n");
+ bpp = 24;
+ }
- if (pixel_multiplier > 1)
- link_bw *= pixel_multiplier;
- ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+ if (!lane) {
+ /*
+ * Account for spread spectrum to avoid
+ * oversubscribing the link. Max center spread
+ * is 2.5%; use 5% for safety's sake.
+ */
+ u32 bps = target_clock * bpp * 21 / 20;
+ lane = bps / (link_bw * 8) + 1;
}
+ intel_crtc->fdi_lanes = lane;
+
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
+ ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
+
/* Ironlake: try to setup display ref clock before DPLL
* enabling. This is only under driver's control after
* PCH B stepping, previous chipset stepping should be
* ignoring this setting.
*/
- if (HAS_PCH_SPLIT(dev)) {
- temp = I915_READ(PCH_DREF_CONTROL);
- /* Always enable nonspread source */
- temp &= ~DREF_NONSPREAD_SOURCE_MASK;
- temp |= DREF_NONSPREAD_SOURCE_ENABLE;
- temp &= ~DREF_SSC_SOURCE_MASK;
- temp |= DREF_SSC_SOURCE_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
-
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
-
- if (has_edp_encoder) {
- if (intel_panel_use_ssc(dev_priv)) {
- temp |= DREF_SSC1_ENABLE;
- I915_WRITE(PCH_DREF_CONTROL, temp);
-
- POSTING_READ(PCH_DREF_CONTROL);
- udelay(200);
- }
- temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+ temp = I915_READ(PCH_DREF_CONTROL);
+ /* Always enable nonspread source */
+ temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
- /* Enable CPU source on CPU attached eDP */
- if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- if (intel_panel_use_ssc(dev_priv))
- temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
- else
- temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
- } else {
- /* Enable SSC on PCH eDP if needed */
- if (intel_panel_use_ssc(dev_priv)) {
- DRM_ERROR("enabling SSC on PCH\n");
- temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
- }
- }
+ if (has_edp_encoder) {
+ if (intel_panel_use_ssc(dev_priv)) {
+ temp |= DREF_SSC1_ENABLE;
I915_WRITE(PCH_DREF_CONTROL, temp);
+
POSTING_READ(PCH_DREF_CONTROL);
udelay(200);
}
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+
+ /* Enable CPU source on CPU attached eDP */
+ if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (intel_panel_use_ssc(dev_priv))
+ temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ else
+ temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ } else {
+ /* Enable SSC on PCH eDP if needed */
+ if (intel_panel_use_ssc(dev_priv)) {
+ DRM_ERROR("enabling SSC on PCH\n");
+ temp |= DREF_SUPERSPREAD_SOURCE_ENABLE;
+ }
+ }
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ udelay(200);
}
if (IS_PINEVIEW(dev)) {
@@ -5183,24 +5180,19 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
/* Enable autotuning of the PLL clock (if permissible) */
- if (HAS_PCH_SPLIT(dev)) {
- int factor = 21;
-
- if (is_lvds) {
- if ((intel_panel_use_ssc(dev_priv) &&
- dev_priv->lvds_ssc_freq == 100) ||
- (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
- factor = 25;
- } else if (is_sdvo && is_tv)
- factor = 20;
+ factor = 21;
+ if (is_lvds) {
+ if ((intel_panel_use_ssc(dev_priv) &&
+ dev_priv->lvds_ssc_freq == 100) ||
+ (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP)
+ factor = 25;
+ } else if (is_sdvo && is_tv)
+ factor = 20;
- if (clock.m1 < factor * clock.n)
- fp |= FP_CB_TUNE;
- }
+ if (clock.m1 < factor * clock.n)
+ fp |= FP_CB_TUNE;
dpll = 0;
- if (!HAS_PCH_SPLIT(dev))
- dpll = DPLL_VGA_MODE_DIS;
if (!IS_GEN2(dev)) {
if (is_lvds)
@@ -5212,7 +5204,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
if (pixel_multiplier > 1) {
if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES;
- else if (HAS_PCH_SPLIT(dev))
+ else
dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
}
dpll |= DPLL_DVO_HIGH_SPEED;
@@ -5226,8 +5218,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
else {
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
/* also FPA1 */
- if (HAS_PCH_SPLIT(dev))
- dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
+ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
if (IS_G4X(dev) && has_reduced_clock)
dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
}
@@ -5245,8 +5236,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
break;
}
- if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev))
- dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
} else {
if (is_lvds) {
dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
@@ -5277,15 +5266,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
- /* Ironlake's plane is forced to pipe, bit 24 is to
- enable color space conversion */
- if (!HAS_PCH_SPLIT(dev)) {
- if (pipe == 0)
- dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
- else
- dspcntr |= DISPPLANE_SEL_PIPE_B;
- }
-
if (pipe == 0 && INTEL_INFO(dev)->gen < 4) {
/* Enable pixel doubling when the dot clock is > 90% of the (display)
* core speed.
@@ -5300,20 +5280,12 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
pipeconf &= ~PIPECONF_DOUBLE_WIDE;
}
- if (!HAS_PCH_SPLIT(dev))
- dpll |= DPLL_VCO_ENABLE;
-
DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
drm_mode_debug_printmodeline(mode);
/* assign to Ironlake registers */
- if (HAS_PCH_SPLIT(dev)) {
- fp_reg = PCH_FP0(pipe);
- dpll_reg = PCH_DPLL(pipe);
- } else {
- fp_reg = FP0(pipe);
- dpll_reg = DPLL(pipe);
- }
+ fp_reg = PCH_FP0(pipe);
+ dpll_reg = PCH_DPLL(pipe);
/* PCH eDP needs FDI, but CPU eDP does not */
if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
@@ -5352,9 +5324,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
* things on.
*/
if (is_lvds) {
- reg = LVDS;
- if (HAS_PCH_SPLIT(dev))
- reg = PCH_LVDS;
+ reg = PCH_LVDS;
temp = I915_READ(reg);
temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
@@ -5383,13 +5353,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
* appropriately here, but we need to look more thoroughly into how
* panels behave in the two modes.
*/
- /* set the dithering flag on non-PCH LVDS as needed */
- if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
- if (dev_priv->lvds_dither)
- temp |= LVDS_ENABLE_DITHER;
- else
- temp &= ~LVDS_ENABLE_DITHER;
- }
if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
lvds_sync |= LVDS_HSYNC_POLARITY;
if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -5410,18 +5373,16 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
}
/* set the dithering flag and clear for anything other than a panel. */
- if (HAS_PCH_SPLIT(dev)) {
- pipeconf &= ~PIPECONF_DITHER_EN;
- pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
- if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
- pipeconf |= PIPECONF_DITHER_EN;
- pipeconf |= PIPECONF_DITHER_TYPE_ST1;
- }
+ pipeconf &= ~PIPECONF_DITHER_EN;
+ pipeconf &= ~PIPECONF_DITHER_TYPE_MASK;
+ if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) {
+ pipeconf |= PIPECONF_DITHER_EN;
+ pipeconf |= PIPECONF_DITHER_TYPE_ST1;
}
if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
intel_dp_set_m_n(crtc, mode, adjusted_mode);
- } else if (HAS_PCH_SPLIT(dev)) {
+ } else {
/* For non-DP output, clear any trans DP clock recovery setting.*/
I915_WRITE(TRANSDATA_M1(pipe), 0);
I915_WRITE(TRANSDATA_N1(pipe), 0);
@@ -5429,31 +5390,20 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(TRANSDPLINK_N1(pipe), 0);
}
- if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ if (!has_edp_encoder ||
+ intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
I915_WRITE(dpll_reg, dpll);
/* Wait for the clocks to stabilize. */
POSTING_READ(dpll_reg);
udelay(150);
- if (INTEL_INFO(dev)->gen >= 4 && !HAS_PCH_SPLIT(dev)) {
- temp = 0;
- if (is_sdvo) {
- temp = intel_mode_get_pixel_multiplier(adjusted_mode);
- if (temp > 1)
- temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
- else
- temp = 0;
- }
- I915_WRITE(DPLL_MD(pipe), temp);
- } else {
- /* The pixel multiplier can only be updated once the
- * DPLL is enabled and the clocks are stable.
- *
- * So write it again.
- */
- I915_WRITE(dpll_reg, dpll);
- }
+ /* The pixel multiplier can only be updated once the
+ * DPLL is enabled and the clocks are stable.
+ *
+ * So write it again.
+ */
+ I915_WRITE(dpll_reg, dpll);
}
intel_crtc->lowfreq_avail = false;
@@ -5504,33 +5454,24 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
(adjusted_mode->crtc_vsync_start - 1) |
((adjusted_mode->crtc_vsync_end - 1) << 16));
- /* pipesrc and dspsize control the size that is scaled from,
- * which should always be the user's requested size.
+ /* pipesrc controls the size that is scaled from, which should
+ * always be the user's requested size.
*/
- if (!HAS_PCH_SPLIT(dev)) {
- I915_WRITE(DSPSIZE(plane),
- ((mode->vdisplay - 1) << 16) |
- (mode->hdisplay - 1));
- I915_WRITE(DSPPOS(plane), 0);
- }
I915_WRITE(PIPESRC(pipe),
((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
- I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
- I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
- I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
+ I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m);
+ I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n);
+ I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m);
+ I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n);
- if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
- ironlake_set_pll_edp(crtc, adjusted_mode->clock);
- }
+ if (has_edp_encoder &&
+ !intel_encoder_is_pch_edp(&has_edp_encoder->base)) {
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
}
I915_WRITE(PIPECONF(pipe), pipeconf);
POSTING_READ(PIPECONF(pipe));
- if (!HAS_PCH_SPLIT(dev))
- intel_enable_pipe(dev_priv, pipe, false);
intel_wait_for_vblank(dev, pipe);
@@ -5542,8 +5483,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
- if (!HAS_PCH_SPLIT(dev))
- intel_enable_plane(dev_priv, plane, pipe);
ret = intel_pipe_set_base(crtc, x, y, old_fb);
--
1.7.4.1
More information about the Intel-gfx
mailing list