[Intel-gfx] [PATCH] drm/i915: allow 945 to control self refresh (CxSR) automatically
Chris Wilson
chris at chris-wilson.co.uk
Sun Jan 9 13:46:04 CET 2011
From: Alexander Lam <lambchop468 at gmail.com>
I changed 945's self refresh to work without the need for the driver to
enable/disable self refresh manually based on the idle state of the gpu.
This is much better than enabling/disabling self refresh for various
reasons, including staying in a lower power state for more time and
avoiding the need for cpu cycles.
This was originally done manually to workaround issues with the hardware
hanging. However, since 944001201: drm/i915: enable low power render
writes on GEN3 hardware, automatic CxSR seems stable.
Signed-off-by: Alexander Lam <lambchop468 at gmail.com>
Acked-by : Li Peng <peng.li at linux.intel.com>
[ickle: play safe with the ordering and disable CxSR before tweaking any
watermark and enable afterwards.]
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
drivers/gpu/drm/i915/intel_display.c | 62 +++++++++++++---------------------
1 files changed, 24 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 14ac352..09d3eaa 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3316,7 +3316,7 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
int planea_wm, planeb_wm;
struct intel_watermark_params planea_params, planeb_params;
unsigned long line_time_us;
- int sr_clock, sr_entries = 0;
+ int sr_clock, sr_entries = 0, sr_enabled = 0;
/* Create copies of the base settings for each pipe */
if (IS_CRESTLINE(dev) || IS_I945GM(dev))
@@ -3345,6 +3345,12 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
*/
cwm = 2;
+ /* Play safe and disable self-refresh before adjusting watermarks. */
+ if (IS_I945G(dev) || IS_I945GM(dev))
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0);
+ else if (IS_I915GM(dev))
+ I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
+
/* Calc sr entries for one plane configs */
if (HAS_FW_BLC(dev) && sr_hdisplay &&
(!planea_clock || !planeb_clock)) {
@@ -3364,20 +3370,12 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
srwm = 1;
if (IS_I945G(dev) || IS_I945GM(dev))
- I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
- else if (IS_I915GM(dev)) {
- /* 915M has a smaller SRWM field */
+ I915_WRITE(FW_BLC_SELF,
+ FW_BLC_SELF_FIFO_MASK | (srwm & 0xff));
+ else if (IS_I915GM(dev))
I915_WRITE(FW_BLC_SELF, srwm & 0x3f);
- I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
- }
- } else {
- /* Turn off self refresh if both pipes are enabled */
- if (IS_I945G(dev) || IS_I945GM(dev)) {
- I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF)
- & ~FW_BLC_SELF_EN);
- } else if (IS_I915GM(dev)) {
- I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN);
- }
+
+ sr_enabled = 1;
}
DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n",
@@ -3392,6 +3390,16 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock,
I915_WRITE(FW_BLC, fwater_lo);
I915_WRITE(FW_BLC2, fwater_hi);
+
+ if (sr_enabled) {
+ if (IS_I945G(dev) || IS_I945GM(dev))
+ I915_WRITE(FW_BLC_SELF,
+ FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
+ else if (IS_I915GM(dev))
+ I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN);
+ DRM_DEBUG_KMS("memory self refresh enabled\n");
+ } else
+ DRM_DEBUG_KMS("memory self refresh disabled\n");
}
static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
@@ -5132,7 +5140,6 @@ static void intel_idle_update(struct work_struct *work)
struct drm_device *dev = dev_priv->dev;
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
- int enabled = 0;
if (!i915_powersave)
return;
@@ -5146,16 +5153,11 @@ static void intel_idle_update(struct work_struct *work)
if (!crtc->fb)
continue;
- enabled++;
intel_crtc = to_intel_crtc(crtc);
if (!intel_crtc->busy)
intel_decrease_pllclock(crtc);
}
- if ((enabled == 1) && (IS_I945G(dev) || IS_I945GM(dev))) {
- DRM_DEBUG_DRIVER("enable memory self refresh on 945\n");
- I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN);
- }
mutex_unlock(&dev->struct_mutex);
}
@@ -5180,17 +5182,9 @@ void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return;
- if (!dev_priv->busy) {
- if (IS_I945G(dev) || IS_I945GM(dev)) {
- u32 fw_blc_self;
-
- DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
- fw_blc_self = I915_READ(FW_BLC_SELF);
- fw_blc_self &= ~FW_BLC_SELF_EN;
- I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK);
- }
+ if (!dev_priv->busy)
dev_priv->busy = true;
- } else
+ else
mod_timer(&dev_priv->idle_timer, jiffies +
msecs_to_jiffies(GPU_IDLE_TIMEOUT));
@@ -5202,14 +5196,6 @@ void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj)
intel_fb = to_intel_framebuffer(crtc->fb);
if (intel_fb->obj == obj) {
if (!intel_crtc->busy) {
- if (IS_I945G(dev) || IS_I945GM(dev)) {
- u32 fw_blc_self;
-
- DRM_DEBUG_DRIVER("disable memory self refresh on 945\n");
- fw_blc_self = I915_READ(FW_BLC_SELF);
- fw_blc_self &= ~FW_BLC_SELF_EN;
- I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK);
- }
/* Non-busy -> busy, upclock */
intel_increase_pllclock(crtc);
intel_crtc->busy = true;
--
1.7.2.3
More information about the Intel-gfx
mailing list