[Intel-gfx] [PATCH] drm/i915: Fix unfenced alignment on pre-G33 hardware
Chris Wilson
chris at chris-wilson.co.uk
Mon Jul 18 18:57:52 CEST 2011
Align unfenced buffers on older hardware to the power-of-two object size.
The docs suggest that it should be possible to align only to a power-of-two
tile height, but using the already computed fence size is easier and
always correct. We also have to make sure that we unbind misaligned buffers
upon tiling changes.
In order to prevent a repetition of this bug, we change the interface to
the alignment computation routines to force the caller to provide the
requested alignment and size of the GTT binding rather than assume the
current values on the object.
Reported-and-tested-by: Sitosfe Wheeler <sitsofe at yahoo.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36326
Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
---
Keith, apologies your missive arrived as I sent the previous patch. This
uses the inferface you proposed..
---
drivers/gpu/drm/i915/i915_drv.h | 4 +-
drivers/gpu/drm/i915/i915_gem.c | 75 ++++++++++++++++----------------
drivers/gpu/drm/i915/i915_gem_tiling.c | 4 +-
3 files changed, 43 insertions(+), 40 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 2798d27..b533ab8 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -1216,7 +1216,9 @@ void i915_gem_free_all_phys_object(struct drm_device *dev);
void i915_gem_release(struct drm_device *dev, struct drm_file *file);
uint32_t
-i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj);
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+ uint32_t size,
+ int tiling_mode);
int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
enum i915_cache_level cache_level);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 2e0d891..b9d9879 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1374,25 +1374,23 @@ i915_gem_free_mmap_offset(struct drm_i915_gem_object *obj)
}
static uint32_t
-i915_gem_get_gtt_size(struct drm_i915_gem_object *obj)
+i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode)
{
- struct drm_device *dev = obj->base.dev;
- uint32_t size;
+ uint32_t fence_size;
- if (INTEL_INFO(dev)->gen >= 4 ||
- obj->tiling_mode == I915_TILING_NONE)
- return obj->base.size;
+ if (INTEL_INFO(dev)->gen >= 4 || tiling_mode == I915_TILING_NONE)
+ return size;
/* Previous chips need a power-of-two fence region when tiling */
if (INTEL_INFO(dev)->gen == 3)
- size = 1024*1024;
+ fence_size = 1024*1024;
else
- size = 512*1024;
+ fence_size = 512*1024;
- while (size < obj->base.size)
- size <<= 1;
+ while (fence_size < size)
+ fence_size <<= 1;
- return size;
+ return fence_size;
}
/**
@@ -1403,59 +1401,53 @@ i915_gem_get_gtt_size(struct drm_i915_gem_object *obj)
* potential fence register mapping.
*/
static uint32_t
-i915_gem_get_gtt_alignment(struct drm_i915_gem_object *obj)
+i915_gem_get_gtt_alignment(struct drm_device *dev,
+ uint32_t size,
+ int tiling_mode)
{
- struct drm_device *dev = obj->base.dev;
-
/*
* Minimum alignment is 4k (GTT page size), but might be greater
* if a fence register is needed for the object.
*/
- if (INTEL_INFO(dev)->gen >= 4 ||
- obj->tiling_mode == I915_TILING_NONE)
+ if (INTEL_INFO(dev)->gen >= 4 || tiling_mode == I915_TILING_NONE)
return 4096;
/*
* Previous chips need to be aligned to the size of the smallest
* fence register that can contain the object.
*/
- return i915_gem_get_gtt_size(obj);
+ return i915_gem_get_gtt_size(dev, size, tiling_mode);
}
/**
* i915_gem_get_unfenced_gtt_alignment - return required GTT alignment for an
* unfenced object
- * @obj: object to check
+ * @dev: the device
+ * @size: size of the object
+ * @tiling_mode: tiling mode of the object
*
* Return the required GTT alignment for an object, only taking into account
* unfenced tiled surface requirements.
*/
uint32_t
-i915_gem_get_unfenced_gtt_alignment(struct drm_i915_gem_object *obj)
+i915_gem_get_unfenced_gtt_alignment(struct drm_device *dev,
+ uint32_t size,
+ int tiling_mode)
{
- struct drm_device *dev = obj->base.dev;
- int tile_height;
+ if (tiling_mode == I915_TILING_NONE)
+ return 4096;
/*
* Minimum alignment is 4k (GTT page size) for sane hw.
*/
- if (INTEL_INFO(dev)->gen >= 4 || IS_G33(dev) ||
- obj->tiling_mode == I915_TILING_NONE)
+ if (INTEL_INFO(dev)->gen >= 4 || IS_G33(dev))
return 4096;
- /*
- * Older chips need unfenced tiled buffers to be aligned to the left
- * edge of an even tile row (where tile rows are counted as if the bo is
- * placed in a fenced gtt region).
+ /* Previous hardware however needs to be aligned to a power-of-two
+ * tile height. The simplest method for determining this is to reuse
+ * the power-of-tile object size.
*/
- if (IS_GEN2(dev))
- tile_height = 16;
- else if (obj->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
- tile_height = 32;
- else
- tile_height = 8;
-
- return tile_height * obj->stride * 2;
+ return i915_gem_get_gtt_size(dev, size, tiling_mode);
}
int
@@ -2786,9 +2778,16 @@ i915_gem_object_bind_to_gtt(struct drm_i915_gem_object *obj,
return -EINVAL;
}
- fence_size = i915_gem_get_gtt_size(obj);
- fence_alignment = i915_gem_get_gtt_alignment(obj);
- unfenced_alignment = i915_gem_get_unfenced_gtt_alignment(obj);
+ fence_size = i915_gem_get_gtt_size(dev,
+ obj->base.size,
+ obj->tiling_mode);
+ fence_alignment = i915_gem_get_gtt_alignment(dev,
+ obj->base.size,
+ obj->tiling_mode);
+ unfenced_alignment =
+ i915_gem_get_unfenced_gtt_alignment(dev,
+ obj->base.size,
+ obj->tiling_mode);
if (alignment == 0)
alignment = map_and_fenceable ? fence_alignment :
diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c
index 82d70fd..99c4faa 100644
--- a/drivers/gpu/drm/i915/i915_gem_tiling.c
+++ b/drivers/gpu/drm/i915/i915_gem_tiling.c
@@ -348,7 +348,9 @@ i915_gem_set_tiling(struct drm_device *dev, void *data,
/* Rebind if we need a change of alignment */
if (!obj->map_and_fenceable) {
u32 unfenced_alignment =
- i915_gem_get_unfenced_gtt_alignment(obj);
+ i915_gem_get_unfenced_gtt_alignment(dev,
+ obj->base.size,
+ args->tiling_mode);
if (obj->gtt_offset & (unfenced_alignment - 1))
ret = i915_gem_object_unbind(obj);
}
--
1.7.5.4
More information about the Intel-gfx
mailing list