[Intel-gfx] [PATCH 8/9] drm/i915: use pipe bpp in DP link bandwidth calculations

[Jesse Barnes]

The pipe may be driving various bpp values depending on the display
configuration, so take that into account when calculating link bandwidth
requirements.

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_dp.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index cb8578b..0be064e 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -684,7 +684,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	struct drm_encoder *encoder;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	int lane_count = 4, bpp = 24;
+	int lane_count = 4;
 	struct intel_dp_m_n m_n;
 	int pipe = intel_crtc->pipe;
 
@@ -703,7 +703,6 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 			break;
 		} else if (is_edp(intel_dp)) {
 			lane_count = dev_priv->edp.lanes;
-			bpp = dev_priv->edp.bpp;
 			break;
 		}
 	}
@@ -713,7 +712,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
 	 * the number of bytes_per_pixel post-LUT, which we always
 	 * set up for 8-bits of R/G/B, or 3 bytes total.
 	 */
-	intel_dp_compute_m_n(bpp, lane_count,
+	intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
 			     mode->clock, adjusted_mode->clock, &m_n);
 
 	if (HAS_PCH_SPLIT(dev)) {
-- 
1.7.4.1