[Intel-gfx] [PATCH 4/7] drm/i915: Let panel power sequencing hardware do its job
Jesse Barnes
jbarnes at virtuousgeek.org
Wed Nov 2 17:23:10 CET 2011
On Wed, 02 Nov 2011 00:31:40 -0700
Keith Packard <keithp at keithp.com> wrote:
> On Tue, 1 Nov 2011 23:20:27 -0700, Keith Packard <keithp at keithp.com> wrote:
>
> > -static void ironlake_wait_panel_off(struct intel_dp *intel_dp)
> > +#define IDLE_ON_MASK (PP_ON | PP_READY | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
> > +#define IDLE_ON_VALUE (PP_ON | PP_READY | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
>
> A bit more testing -- looks like the MacBook Air doesn't mange to get
> PP_READY set when it's time to turn the panel on. I should look at this
> a bit more closely; there's no reason it shouldn't be set. But, nothing
> bad seems to happen if we simply ignore the PP_READY bit
>
> +#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
> +#define IDLE_ON_VALUE (PP_ON | 0 | PP_SEQUENCE_NONE | 0 | PP_SEQUENCE_STATE_ON_IDLE)
Note that PP_READY will incorrectly depend on some other register
values, so in some configs the panel will happily power up even if
PP_READY isn't set yet...
--
Jesse Barnes, Intel Open Source Technology Center
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20111102/55d89db8/attachment.sig>
More information about the Intel-gfx
mailing list