[Intel-gfx] [PATCH v2] drivers: i915: Default backlight PWM frequency

[Simon Que]

If the firmware did not initialize the backlight PWM registers, set up a
default PWM frequency of 200 Hz.  This is determined using the following
formula:

  freq = refclk / (128 * pwm_max)

The PWM register allows the max PWM value to be set.  So we want to use
the formula, where freq = 200:

  pwm_max = refclk / (128 * freq)

This patch will, in the case of missing PWM register initialization
values, look for the reference clock frequency.  Based on that, it sets
an appropriate max PWM value for a frequency of 200 Hz.

If no refclk frequency is found, the max PWM will be zero, which results
in no change to the PWM registers.

Signed-off-by: Simon Que <sque at chromium.org>
---
 drivers/gpu/drm/i915/i915_reg.h    |    1 +
 drivers/gpu/drm/i915/intel_panel.c |   37 +++++++++++++++++++++++++++++------
 2 files changed, 31 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5d5def7..a832028 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3275,6 +3275,7 @@
 #define  PWM_POLARITY_ACTIVE_HIGH2	(0 << 28)
 
 #define BLC_PWM_PCH_CTL2	0xc8254
+#define BLC_PWM_PCH_FREQ_SHIFT	16
 
 #define PCH_PP_STATUS		0xc7200
 #define PCH_PP_CONTROL		0xc7204
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index f15388c..f865e52 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -32,6 +32,10 @@
 
 #define PCI_LBPC 0xf4 /* legacy/combination backlight modes */
 
+/* For computing default PWM settings */
+#define DEFAULT_BACKLIGHT_PWM_FREQ   200
+#define BACKLIGHT_REFCLK_DIVISOR     128
+
 void
 intel_fixed_panel_mode(struct drm_display_mode *fixed_mode,
 		       struct drm_display_mode *adjusted_mode)
@@ -129,12 +133,31 @@ static int is_backlight_combination_mode(struct drm_device *dev)
 	return 0;
 }
 
+static u32 i915_get_default_max_backlight(struct drm_i915_private *dev_priv)
+{
+	u32 refclk_freq_mhz = 0;
+	u32 max_pwm = 0;
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		refclk_freq_mhz = I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
+	else if (dev_priv->lvds_use_ssc)
+		refclk_freq_mhz = dev_priv->lvds_ssc_freq;
+
+	max_pwm = refclk_freq_mhz * 1000000 /
+			(BACKLIGHT_REFCLK_DIVISOR * DEFAULT_BACKLIGHT_PWM_FREQ);
+
+	if (HAS_PCH_SPLIT(dev_priv->dev))
+		dev_priv->saveBLC_PWM_CTL2 = max_pwm << BLC_PWM_PCH_FREQ_SHIFT;
+	else
+		dev_priv->saveBLC_PWM_CTL = max_pwm <<
+			BACKLIGHT_MODULATION_FREQ_SHIFT;
+	return max_pwm;
+}
+
 static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv)
 {
 	u32 val;
 
-	/* Restore the CTL value if it lost, e.g. GPU reset */
-
+	/* Restore the CTL value if it was lost, e.g. GPU reset */
 	if (HAS_PCH_SPLIT(dev_priv->dev)) {
 		val = I915_READ(BLC_PWM_PCH_CTL2);
 		if (dev_priv->saveBLC_PWM_CTL2 == 0) {
@@ -168,11 +191,11 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
 
 	max = i915_read_blc_pwm_ctl(dev_priv);
 	if (max == 0) {
-		/* XXX add code here to query mode clock or hardware clock
-		 * and program max PWM appropriately.
-		 */
-		printk_once(KERN_WARNING "fixme: max PWM is zero.\n");
-		return 1;
+		/* If backlight PWM registers have not been set, set them to */
+		/* default backlight PWM settings. */
+		max = i915_get_default_max_backlight(dev_priv);
+		i915_read_blc_pwm_ctl(dev_priv);
+		return max;
 	}
 
 	if (HAS_PCH_SPLIT(dev)) {
-- 
1.7.2.3