[Intel-gfx] [PATCH] drm/i915: By default, enable RC6 on IVB and SNB when reasonable

[David Woodhouse]

On Wed, 2011-11-23 at 15:39 +0100, Daniel Vetter wrote:
> At least for the dmar+gfx+semaphores hang I can reproduce, just disabling
> dmar with intel_iommu=igfx_off is not good enough and iirc the same holds
> for the dmar+rc6 hangs reported. 

Um... let me restate that for clarity (and partly for Rajesh's benefit).

The DMAR associated with the integrated graphics is *disabled*.
Turned off. Not active. Ever.

You have a problem when you enable the *other* DMAR units in the system,
which should not be affecting the graphics device in any way.

When you do this, you see 'hangs' with semaphores and RC6. Is there a
better description of these 'hangs' somewhere? Is the hardware
completely locked?

These hangs go away when you disable the DMAR units. Again, that is the
*other* DMAR units in the system that have nothing to do with graphics.

While I'm getting quite used to DMAR-related errata, this one does make
me stop and think 'wtf?'. It just seems so incongruous that disabling an
*unrelated* IOMMU would make the problem go away, and it makes me wonder
if it's actually a timing-related issue which is always there, but
something about the use of DMAR for network/disk/etc. makes it more
likely to trigger?

We definitely need the hardware folks to get to the bottom of this one.

-- 
dwmw2
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 5818 bytes
Desc: not available
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20111123/32652c1a/attachment.bin>