[Intel-gfx] [PATCH 5/8] drm/i915: fix PCH PLL assertion check for 3 pipes

[Jesse Barnes]

Add a couple of checks now that we're using the 3rd transcoder:
  1) make sure the transcoder PLL enable bit is set for the transcoder
     in question
  2) when checking actual PLL enable, use the selected PLL number rather
     than the transcoder number (they could be different now)

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_display.c |   13 +++++++++++++
 1 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 45b24eb..7e5f309 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -803,6 +803,19 @@ static void assert_pch_pll(struct drm_i915_private *dev_priv,
 	u32 val;
 	bool cur_state;
 
+	if (HAS_PCH_CPT(dev_priv->dev)) {
+		u32 pch_dpll;
+
+		pch_dpll = I915_READ(PCH_DPLL_SEL);
+
+		/* Make sure the selected PLL is enabled to the transcoder */
+		WARN(!((pch_dpll >> (4 * pipe)) & 8),
+		     "transcoder %d PLL not enabled\n", pipe);
+
+		/* Convert the transcoder pipe number to a pll pipe number */
+		pipe = (pch_dpll >> (4 * pipe)) & 1;
+	}
+
 	reg = PCH_DPLL(pipe);
 	val = I915_READ(reg);
 	cur_state = !!(val & DPLL_VCO_ENABLE);
-- 
1.7.4.1