[Intel-gfx] [PATCH 2/2] drm/i915/dp: Fix eDP on PCH DP on CPT/PPT
Adam Jackson
ajax at redhat.com
Fri Oct 14 23:22:26 CEST 2011
According to the gen6 docs, only the DP_A port (on-CPU eDP) still uses
the old IBX bit shift for the link training pattern setup bits.
Signed-off-by: Adam Jackson <ajax at redhat.com>
---
drivers/gpu/drm/i915/intel_dp.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index ec1efd5..77f2e12 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -768,7 +768,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
intel_dp->DP |= DP_SYNC_VS_HIGH;
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
else
intel_dp->DP |= DP_LINK_TRAIN_OFF;
@@ -1375,7 +1375,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
DP_LINK_CONFIGURATION_SIZE);
DP |= DP_PORT_EN;
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
DP &= ~DP_LINK_TRAIN_MASK_CPT;
else
DP &= ~DP_LINK_TRAIN_MASK;
@@ -1394,7 +1394,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
else
reg = DP | DP_LINK_TRAIN_PAT_1;
@@ -1469,7 +1469,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
else
reg = DP | DP_LINK_TRAIN_PAT_2;
@@ -1510,7 +1510,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
++tries;
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_OFF_CPT;
else
reg = DP | DP_LINK_TRAIN_OFF;
@@ -1540,7 +1540,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
udelay(100);
}
- if (HAS_PCH_CPT(dev) && !is_edp(intel_dp)) {
+ if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) {
DP &= ~DP_LINK_TRAIN_MASK_CPT;
I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
} else {
--
1.7.6.4
More information about the Intel-gfx
mailing list