[Intel-gfx] [PATCH 2/2] Check if the bus is valid prior to discovering edid.
Eugeni Dodonov
eugeni.dodonov at intel.com
Mon Oct 17 15:12:30 CEST 2011
This adds a new function intel_drm_get_valid_edid, which attempts to detect
EDID values from available devices and returns quickly in case no connection
is present. We detect non-existing devices by checking the i2c_transfer
status, and if it fails with the -ENXIO result, we know that the
i2c_algo_bit was unable to locate the hardware, so we give up on further
edid discovery.
This should improve the edid detection timeouts by about 10-30% in most
cases, and by a much larger margin in case of broken or phantom outputs
https://bugs.freedesktop.org/show_bug.cgi?id=41059.
This also removes intel_ddc_probe, whose functionality is now done by
intel_drm_get_valid_edid.
Signed-off-by: Eugeni Dodonov <eugeni.dodonov at intel.com>
---
drivers/gpu/drm/i915/intel_crt.c | 46 ++++++++++++++++++------------------
drivers/gpu/drm/i915/intel_dp.c | 4 +-
drivers/gpu/drm/i915/intel_drv.h | 3 +-
drivers/gpu/drm/i915/intel_hdmi.c | 4 +-
drivers/gpu/drm/i915/intel_i2c.c | 42 ++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_lvds.c | 2 +-
drivers/gpu/drm/i915/intel_modes.c | 29 +----------------------
drivers/gpu/drm/i915/intel_sdvo.c | 4 +-
8 files changed, 75 insertions(+), 59 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 0979d88..3b55fdf 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -273,36 +273,36 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
{
struct intel_crt *crt = intel_attached_crt(connector);
struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
+ struct edid *edid = NULL;
+ bool is_digital = false;
/* CRT should always be at 0, but check anyway */
if (crt->base.type != INTEL_OUTPUT_ANALOG)
return false;
- if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
- struct edid *edid;
- bool is_digital = false;
+ edid = intel_drm_get_valid_edid(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ if (!edid)
+ return false;
- edid = drm_get_edid(connector,
- &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
- /*
- * This may be a DVI-I connector with a shared DDC
- * link between analog and digital outputs, so we
- * have to check the EDID input spec of the attached device.
- *
- * On the other hand, what should we do if it is a broken EDID?
- */
- if (edid != NULL) {
- is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
- connector->display_info.raw_edid = NULL;
- kfree(edid);
- }
+ /*
+ * This may be a DVI-I connector with a shared DDC
+ * link between analog and digital outputs, so we
+ * have to check the EDID input spec of the attached device.
+ *
+ * On the other hand, what should we do if it is a broken EDID?
+ */
+ if (edid != NULL) {
+ is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
+ connector->display_info.raw_edid = NULL;
+ kfree(edid);
+ }
- if (!is_digital) {
- DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
- return true;
- } else {
- DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
- }
+ if (!is_digital) {
+ DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
+ return true;
+ } else {
+ DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
}
return false;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 44fef5e..dd0d8b1 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1715,7 +1715,7 @@ intel_dp_detect(struct drm_connector *connector, bool force)
if (intel_dp->force_audio) {
intel_dp->has_audio = intel_dp->force_audio > 0;
} else {
- edid = drm_get_edid(connector, &intel_dp->adapter);
+ edid = intel_drm_get_valid_edid(connector, &intel_dp->adapter);
if (edid) {
intel_dp->has_audio = drm_detect_monitor_audio(edid);
connector->display_info.raw_edid = NULL;
@@ -1772,7 +1772,7 @@ intel_dp_detect_audio(struct drm_connector *connector)
struct edid *edid;
bool has_audio = false;
- edid = drm_get_edid(connector, &intel_dp->adapter);
+ edid = intel_drm_get_valid_edid(connector, &intel_dp->adapter);
if (edid) {
has_audio = drm_detect_monitor_audio(edid);
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index fe1099d..0e4b823 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -264,8 +264,9 @@ struct intel_fbc_work {
int interval;
};
+struct edid * intel_drm_get_valid_edid(struct drm_connector *connector,
+ struct i2c_adapter *adapter);
int intel_ddc_get_modes(struct drm_connector *c, struct i2c_adapter *adapter);
-extern bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus);
extern void intel_attach_force_audio_property(struct drm_connector *connector);
extern void intel_attach_broadcast_rgb_property(struct drm_connector *connector);
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 226ba83..714f2fb 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -329,7 +329,7 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
intel_hdmi->has_hdmi_sink = false;
intel_hdmi->has_audio = false;
- edid = drm_get_edid(connector,
+ edid = intel_drm_get_valid_edid(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
if (edid) {
@@ -371,7 +371,7 @@ intel_hdmi_detect_audio(struct drm_connector *connector)
struct edid *edid;
bool has_audio = false;
- edid = drm_get_edid(connector,
+ edid = intel_drm_get_valid_edid(connector,
&dev_priv->gmbus[intel_hdmi->ddc_bus].adapter);
if (edid) {
if (edid->input & DRM_EDID_INPUT_DIGITAL)
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index d98cee6..b3a6eda 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -470,3 +470,45 @@ void intel_teardown_gmbus(struct drm_device *dev)
kfree(dev_priv->gmbus);
dev_priv->gmbus = NULL;
}
+
+/**
+ * intel_drm_get_valid_edid - gets edid from existent adapters only
+ * @connector: DRM connector device to use
+ * @adapter: i2c adapter
+ *
+ * Verifies if the i2c adapter is responding to our queries before
+ * attempting to do proper communication with it. If it does,
+ * retreive the EDID with help of drm_get_edid
+ */
+struct edid *
+intel_drm_get_valid_edid(struct drm_connector *connector,
+ struct i2c_adapter *adapter)
+{
+ int ret;
+ u8 out_buf[] = { 0x0, 0x0};
+ u8 buf[2];
+ struct i2c_msg msgs[] = {
+ {
+ .addr = 0x50,
+ .flags = 0,
+ .len = 1,
+ .buf = out_buf,
+ },
+ {
+ .addr = 0x50,
+ .flags = I2C_M_RD,
+ .len = 1,
+ .buf = buf,
+ }
+ };
+
+ /* We just check for -ENXIO - drm_get_edid checks if the transfer
+ * works and manages the remaining parts of the EDID */
+ ret = i2c_transfer(adapter, msgs, 2);
+ if (ret == -ENXIO) {
+ DRM_DEBUG_KMS("i915: adapter %s not responding: %d\n",
+ adapter->name, ret);
+ return NULL;
+ }
+ return drm_get_edid(connector, adapter);
+}
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 31da77f..8f59a8e 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -921,7 +921,7 @@ bool intel_lvds_init(struct drm_device *dev)
* Attempt to get the fixed panel mode from DDC. Assume that the
* preferred mode is the right one.
*/
- intel_lvds->edid = drm_get_edid(connector,
+ intel_lvds->edid = intel_drm_get_valid_edid(connector,
&dev_priv->gmbus[pin].adapter);
if (intel_lvds->edid) {
if (drm_add_edid_modes(connector,
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index 3b26a3b..ae1a989 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -31,33 +31,6 @@
#include "i915_drv.h"
/**
- * intel_ddc_probe
- *
- */
-bool intel_ddc_probe(struct intel_encoder *intel_encoder, int ddc_bus)
-{
- struct drm_i915_private *dev_priv = intel_encoder->base.dev->dev_private;
- u8 out_buf[] = { 0x0, 0x0};
- u8 buf[2];
- struct i2c_msg msgs[] = {
- {
- .addr = 0x50,
- .flags = 0,
- .len = 1,
- .buf = out_buf,
- },
- {
- .addr = 0x50,
- .flags = I2C_M_RD,
- .len = 1,
- .buf = buf,
- }
- };
-
- return i2c_transfer(&dev_priv->gmbus[ddc_bus].adapter, msgs, 2) == 2;
-}
-
-/**
* intel_ddc_get_modes - get modelist from monitor
* @connector: DRM connector device to use
* @adapter: i2c adapter
@@ -70,7 +43,7 @@ int intel_ddc_get_modes(struct drm_connector *connector,
struct edid *edid;
int ret = 0;
- edid = drm_get_edid(connector, adapter);
+ edid = intel_drm_get_valid_edid(connector, adapter);
if (edid) {
drm_mode_connector_update_edid_property(connector, edid);
ret = drm_add_edid_modes(connector, edid);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 6348c49..8b4ac61 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1240,7 +1240,7 @@ static struct edid *
intel_sdvo_get_edid(struct drm_connector *connector)
{
struct intel_sdvo *sdvo = intel_attached_sdvo(connector);
- return drm_get_edid(connector, &sdvo->ddc);
+ return intel_drm_get_valid_edid(connector, &sdvo->ddc);
}
/* Mac mini hack -- use the same DDC as the analog connector */
@@ -1249,7 +1249,7 @@ intel_sdvo_get_analog_edid(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- return drm_get_edid(connector,
+ return intel_drm_get_valid_edid(connector,
&dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
}
--
1.7.7
More information about the Intel-gfx
mailing list