[Intel-gfx] [PATCH v6] drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI
Simon Farnsworth
simon.farnsworth at onelan.co.uk
Wed Sep 21 18:13:30 CEST 2011
I was seeing a nasty 5 frame glitch every 10 seconds, caused by the
poll for connection on DVI attached by SDVO.
As my SDVO DVI supports hotplug detect interrupts, the fix is to
enable them, and hook them in to the various bits of driver
infrastructure so that they work reliably.
Note that this is only tested on single-function DVI-D SDVOs, on two
platforms (965GME and 945GSE), and has not been checked against a
specification document.
With lots of help from Adam Jackson <ajax at redhat.com> on IRC.
Signed-off-by: Simon Farnsworth <simon.farnsworth at onelan.co.uk>
---
Changes from v5:
* Add an all-important ~ when trying to clear just the bits I think I
understand.
* Make the patch safer - instead of setting active hotplug based on
supported hotplug (as the commented out code did), set it based on
the current active hotplug, with the two bits we think we
understand tweaked.
* Add my testing details to the changelog, to reduce head-scratching
time if I regress someone's hardware.
Changes from the unnumbered v4:
* At Keith Packard's request, store the required hotplug bits in
struct intel_sdvo and just call SET_ACTIVE_HOT_PLUG to enable
hotplug interrupts.
* Add some comments to explain why I'm doing things that reviewers
didn't think was obvious, so that the next person to examine this
area doesn't get confused.
Changes from v3:
* As per Chris Wilson's comment, move the hotplug enable from
intel_sdvo_init to intel_sdvo_dvi_init. Should correctly enable HPD
if only one of a multifunction SDVO pair supports HPD.
Changes from v2:
* Stylistic cleanups requested by Chris Wilson in review:
* Make intel_sdvo_find_connector cleaner
* Rename intel_sdvo_set_hotplug to intel_sdvo_enable_hotplug
(reflects functionality better)
* Remove intel_sdvo_do_hotplug
Changes from first version:
* Don't call intel_sdvo_supports_hotplug twice - pick up the setting
in connector->polled instead (suggested by Keith Packard in review).
* Change subject prefix to drm/i915
drivers/gpu/drm/i915/intel_drv.h | 3 -
drivers/gpu/drm/i915/intel_sdvo.c | 88 ++++++++++++-------------------------
2 files changed, 29 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 375690b..a72d31d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -337,9 +337,6 @@ extern void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder,
struct drm_connector *connector,
struct intel_load_detect_pipe *old);
-extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
-extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
-extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
extern void intelfb_restore(void);
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index aa94110..7312002 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -92,6 +92,11 @@ struct intel_sdvo {
*/
uint16_t attached_output;
+ /*
+ * Hotplug activation bits for this device
+ */
+ uint8_t hotplug_active[2];
+
/**
* This is used to select the color range of RBG outputs in HDMI mode.
* It is only valid when using TMDS encoding and 8 bit per color mode.
@@ -1208,74 +1213,20 @@ static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct in
return true;
}
-/* No use! */
-#if 0
-struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
-{
- struct drm_connector *connector = NULL;
- struct intel_sdvo *iout = NULL;
- struct intel_sdvo *sdvo;
-
- /* find the sdvo connector */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- iout = to_intel_sdvo(connector);
-
- if (iout->type != INTEL_OUTPUT_SDVO)
- continue;
-
- sdvo = iout->dev_priv;
-
- if (sdvo->sdvo_reg == SDVOB && sdvoB)
- return connector;
-
- if (sdvo->sdvo_reg == SDVOC && !sdvoB)
- return connector;
-
- }
-
- return NULL;
-}
-
-int intel_sdvo_supports_hotplug(struct drm_connector *connector)
+static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
{
u8 response[2];
- u8 status;
- struct intel_sdvo *intel_sdvo;
- DRM_DEBUG_KMS("\n");
-
- if (!connector)
- return 0;
-
- intel_sdvo = to_intel_sdvo(connector);
return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
&response, 2) && response[0];
}
-void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
+static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
{
- u8 response[2];
- u8 status;
- struct intel_sdvo *intel_sdvo = to_intel_sdvo(connector);
-
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_sdvo, &response, 2);
-
- if (on) {
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
- status = intel_sdvo_read_response(intel_sdvo, &response, 2);
-
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
- } else {
- response[0] = 0;
- response[1] = 0;
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
- }
+ struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
- intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
- intel_sdvo_read_response(intel_sdvo, &response, 2);
+ intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
}
-#endif
static bool
intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
@@ -2045,6 +1996,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
{
struct drm_encoder *encoder = &intel_sdvo->base.base;
struct drm_connector *connector;
+ struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
struct intel_connector *intel_connector;
struct intel_sdvo_connector *intel_sdvo_connector;
@@ -2062,7 +2014,17 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
intel_connector = &intel_sdvo_connector->base;
connector = &intel_connector->base;
- connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+ if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ intel_sdvo->hotplug_active[0] |= 1 << device;
+ /* Some SDVO devices have one-shot hotplug interrupts.
+ * Ensure that they get re-enabled when an interrupt happens.
+ */
+ intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
+ intel_sdvo_enable_hotplug(intel_encoder);
+ }
+ else
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
@@ -2569,6 +2531,14 @@ bool intel_sdvo_init(struct drm_device *dev, int sdvo_reg)
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
goto err;
+ /* Set up hotplug command - note paranoia about contents of reply.
+ * We assume that the hardware is in a sane state, and only touch
+ * the bits we think we understand.
+ */
+ intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+ &intel_sdvo->hotplug_active, 2);
+ intel_sdvo->hotplug_active[0] &= ~0x3;
+
if (intel_sdvo_output_setup(intel_sdvo,
intel_sdvo->caps.output_flags) != true) {
DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
--
1.7.6
More information about the Intel-gfx
mailing list