[Intel-gfx] [PATCH 2/3] drm/i915: check PPS regs for sanity when using eDP

[Jesse Barnes]

If these regs don't have valid values, the panel won't come up, and may
even cause a system hang.  So do a basic sanity check when an eDP panel
is detected.

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_dp.c |    7 +++++++
 1 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 110552f..6346b29 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2462,6 +2462,13 @@ intel_dp_init(struct drm_device *dev, int output_reg)
 		pp_off = I915_READ(PCH_PP_OFF_DELAYS);
 		pp_div = I915_READ(PCH_PP_DIVISOR);
 
+		if (!pp_on || !pp_off || !pp_div) {
+			DRM_INFO("bad panel power sequencing delays, disabling panel\n");
+			intel_dp_encoder_destroy(&intel_dp->base.base);
+			intel_dp_destroy(&intel_connector->base);
+			return;
+		}
+
 		/* Pull timing values out of registers */
 		cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >>
 			PANEL_POWER_UP_DELAY_SHIFT;
-- 
1.7.4.1