[Intel-gfx] [PATCH 4/5] drm/i915: implement w/a for incorrect guarband clipping

[Daniel Vetter]

According to Bsepc, this should be set by default, but isn't. See vo1c.4
"Render Engine Command Streamer", Section 1.1.14.3 "3D_CHICKEN3"

Bspec also says that we always need to set all mask bits.

v2: Add comment about the mask bits wtf.

Reviewed-by: Ben Widawsky <ben at bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h      |    1 +
 drivers/gpu/drm/i915/intel_display.c |    4 ++++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 78171f7..cd2d2c7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -439,6 +439,7 @@
  */
 # define _3D_CHICKEN2_WM_READ_PIPELINED			(1 << 14)
 #define _3D_CHICKEN3	0x02090
+#define  _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL		(1 << 5)
 
 #define MI_MODE		0x0209c
 # define VS_TIMER_DISPATCH				(1 << 6)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b98c933..083c741 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8575,6 +8575,10 @@ static void gen6_init_clock_gating(struct drm_device *dev)
 		   GEN6_RCPBUNIT_CLOCK_GATE_DISABLE |
 		   GEN6_RCCUNIT_CLOCK_GATE_DISABLE);
 
+	/* Bspec says we need to always set all mask bits. */
+	I915_WRITE(_3D_CHICKEN, (0xFFFF << 16) |
+		   _3D_CHICKEN_SF_DISABLE_FASTCLIP_CULL);
+
 	/*
 	 * According to the spec the following bits should be
 	 * set in order to enable memory self-refresh and fbc:
-- 
1.7.7.6