[Intel-gfx] [PATCH v6 3/4] drm/i915: Haswell HDMI audio initialization
Wang Xingchao
xingchao.wang at intel.com
Thu Aug 9 10:52:17 CEST 2012
Added new haswell_write_eld() to initialize Haswell HDMI audio registers
to generate an unsolicited response to the audio controller driver to
indicate that the controller sequence should start.
Signed-off-by: Wang Xingchao <xingchao.wang at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_display.c | 94 +++++++++++++++++++++++++++++++++-
2 files changed, 94 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 55aa10e..08f8b65 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4294,6 +4294,7 @@
#define AUD_DIG_CNVT(pipe) _PIPE(pipe, \
HSW_AUD_DIG_CNVT_1, \
HSW_AUD_DIG_CNVT_2)
+#define DIP_PORT_SEL_MASK 0x3
#define HSW_AUD_EDID_DATA_A 0x65050
#define HSW_AUD_EDID_DATA_B 0x65150
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 70d30fc..be0950d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -5067,6 +5067,98 @@ static void g4x_write_eld(struct drm_connector *connector,
I915_WRITE(G4X_AUD_CNTL_ST, i);
}
+static void haswell_write_eld(struct drm_connector *connector,
+ struct drm_crtc *crtc)
+{
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+ uint8_t *eld = connector->eld;
+ uint32_t eldv;
+ uint32_t i;
+ int len;
+ int pipe = to_intel_crtc(crtc)->pipe;
+ int tmp;
+
+ int hdmiw_hdmiedid = HSW_AUD_EDID_DATA(pipe);
+ int aud_cntl_st = HSW_AUD_DIP_ELD_CTRL(pipe);
+ int aud_config = HSW_AUD_CFG(pipe);
+ int aud_cntrl_st2 = HSW_AUD_PIN_ELD_CP_VLD;
+
+
+ DRM_DEBUG_DRIVER("HDMI: Haswell Audio initialize....\n");
+
+ /* Audio output enable */
+ DRM_DEBUG_DRIVER("HDMI audio: enable codec\n");
+ tmp = I915_READ(aud_cntrl_st2);
+ tmp |= (AUDIO_OUTPUT_ENABLE_A | AUDIO_OUTPUT_ENABLE_B | AUDIO_OUTPUT_ENABLE_C);
+ I915_WRITE(aud_cntrl_st2, tmp);
+
+ /* Set ELD valid state */
+ tmp = I915_READ(aud_cntrl_st2);
+ DRM_DEBUG_DRIVER("HDMI audio: pin eld vld status=0x%8x\n", tmp);
+ tmp |= (AUDIO_ELD_VALID_A | AUDIO_ELD_VALID_B | AUDIO_ELD_VALID_C);
+ I915_WRITE(aud_cntrl_st2, tmp);
+ tmp = I915_READ(aud_cntrl_st2);
+ DRM_DEBUG_DRIVER("HDMI audio: eld vld status=0x%8x\n", tmp);
+
+ /* Enable HDMI mode */
+ tmp = I915_READ(aud_config);
+ DRM_DEBUG_DRIVER("HDMI audio: audio conf: 0x%8x\n", tmp);
+ /* clear N_programing_enable and N_value_index */
+ tmp &= ~(AUD_CONFIG_N_VALUE_INDEX | AUD_CONFIG_N_PROG_ENABLE);
+ I915_WRITE(aud_config, tmp);
+
+ DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(pipe));
+
+ i = I915_READ(aud_cntl_st);
+ i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
+ if (!i) {
+ DRM_DEBUG_DRIVER("Audio directed to unknown port\n");
+ /* operate blindly on all ports */
+ eldv = AUDIO_ELD_VALID_A;
+ eldv |= AUDIO_ELD_VALID_B;
+ eldv |= AUDIO_ELD_VALID_C;
+ } else {
+ DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i);
+ eldv = AUDIO_ELD_VALID_A << ((i - 1) * 4);
+ }
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
+ DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
+ eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
+ I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
+ } else
+ I915_WRITE(aud_config, 0);
+
+ if (intel_eld_uptodate(connector,
+ aud_cntrl_st2, eldv,
+ aud_cntl_st, IBX_ELD_ADDRESS,
+ hdmiw_hdmiedid))
+ return;
+
+ i = I915_READ(aud_cntrl_st2);
+ i &= ~eldv;
+ I915_WRITE(aud_cntrl_st2, i);
+
+ if (!eld[0])
+ return;
+
+ i = I915_READ(aud_cntl_st);
+ i &= ~IBX_ELD_ADDRESS;
+ I915_WRITE(aud_cntl_st, i);
+ i = (i >> 29) & DIP_PORT_SEL_MASK; /* DIP_Port_Select, 0x1 = PortB */
+ DRM_DEBUG_DRIVER("port num:%d\n", i);
+
+ len = min_t(uint8_t, eld[2], 21); /* 84 bytes of hw ELD buffer */
+ DRM_DEBUG_DRIVER("ELD size %d\n", len);
+ for (i = 0; i < len; i++)
+ I915_WRITE(hdmiw_hdmiedid, *((uint32_t *)eld + i));
+
+ i = I915_READ(aud_cntrl_st2);
+ i |= eldv;
+ I915_WRITE(aud_cntrl_st2, i);
+
+}
+
static void ironlake_write_eld(struct drm_connector *connector,
struct drm_crtc *crtc)
{
@@ -7041,7 +7133,7 @@ static void intel_init_display(struct drm_device *dev)
dev_priv->display.write_eld = ironlake_write_eld;
} else if (IS_HASWELL(dev)) {
dev_priv->display.fdi_link_train = hsw_fdi_link_train;
- dev_priv->display.write_eld = ironlake_write_eld;
+ dev_priv->display.write_eld = haswell_write_eld;
} else
dev_priv->display.update_wm = NULL;
} else if (IS_G4X(dev)) {
--
1.7.9.5
More information about the Intel-gfx
mailing list