[Intel-gfx] [PATCH 5/5] drm/i915: add DP aux ctl regs to struct intel_dp

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni at intel.com>

So we can just reuse the value whenever we need, reducing code
duplication.

V2: Rebase since patch 3/5 was discarded.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  | 12 +++++++++
 drivers/gpu/drm/i915/intel_dp.c  | 56 +++++++---------------------------------
 drivers/gpu/drm/i915/intel_drv.h |  2 ++
 3 files changed, 24 insertions(+), 46 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f2a5ea6..4307cb2 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2541,6 +2541,9 @@
 #define DPD_AUX_CH_DATA4		0x64320
 #define DPD_AUX_CH_DATA5		0x64324
 
+#define DP_AUX_CH_CTL(port)    _PORT(port, DPA_AUX_CH_CTL, DPB_AUX_CH_CTL)
+#define DP_AUX_CH_DATA1(port)  _PORT(port, DPA_AUX_CH_DATA1, DPB_AUX_CH_DATA1)
+
 #define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
 #define   DP_AUX_CH_CTL_DONE		    (1 << 30)
 #define   DP_AUX_CH_CTL_INTERRUPT	    (1 << 29)
@@ -4066,6 +4069,15 @@
 #define PCH_DPD_AUX_CH_DATA4	0xe4320
 #define PCH_DPD_AUX_CH_DATA5	0xe4324
 
+/* Definitions to make the macro easier to understand: */
+#define __FAKE_PCH_DPA_AUX_CH_CTL	0xe4010
+#define __FAKE_PCH_DPA_AUX_CH_DATA1	0xe4014
+
+#define PCH_DP_AUX_CH_CTL(port) _PORT(port, __FAKE_PCH_DPA_AUX_CH_CTL, \
+				      PCH_DPB_AUX_CH_CTL)
+#define PCH_DP_AUX_CH_DATA1(port) _PORT(port, __FAKE_PCH_DPA_AUX_CH_DATA1, \
+					PCH_DPB_AUX_CH_DATA1)
+
 /* CPT */
 #define  PORT_TRANS_A_SEL_CPT	0
 #define  PORT_TRANS_B_SEL_CPT	(1<<29)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 75073cc..2db90f8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -328,29 +328,10 @@ intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t ch_ctl = intel_dp->output_reg + 0x10;
+	uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
 	uint32_t status;
 	bool done;
 
-	if (IS_HASWELL(dev)) {
-		switch (intel_dig_port->port) {
-		case PORT_A:
-			ch_ctl = DPA_AUX_CH_CTL;
-			break;
-		case PORT_B:
-			ch_ctl = PCH_DPB_AUX_CH_CTL;
-			break;
-		case PORT_C:
-			ch_ctl = PCH_DPC_AUX_CH_CTL;
-			break;
-		case PORT_D:
-			ch_ctl = PCH_DPD_AUX_CH_CTL;
-			break;
-		default:
-			BUG();
-		}
-	}
-
 #define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
 	if (has_aux_irq)
 		done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
@@ -369,12 +350,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 		uint8_t *send, int send_bytes,
 		uint8_t *recv, int recv_size)
 {
-	uint32_t output_reg = intel_dp->output_reg;
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	uint32_t ch_ctl = output_reg + 0x10;
-	uint32_t ch_data = ch_ctl + 4;
+	uint32_t ch_ctl = intel_dp->aux_ch_ctl_reg;
+	uint32_t ch_data = intel_dp->aux_ch_data_reg;
 	int i, ret, recv_bytes;
 	uint32_t status;
 	uint32_t aux_clock_divider;
@@ -387,29 +367,6 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	 */
 	pm_qos_update_request(&dev_priv->pm_qos, 0);
 
-	if (IS_HASWELL(dev)) {
-		switch (intel_dig_port->port) {
-		case PORT_A:
-			ch_ctl = DPA_AUX_CH_CTL;
-			ch_data = DPA_AUX_CH_DATA1;
-			break;
-		case PORT_B:
-			ch_ctl = PCH_DPB_AUX_CH_CTL;
-			ch_data = PCH_DPB_AUX_CH_DATA1;
-			break;
-		case PORT_C:
-			ch_ctl = PCH_DPC_AUX_CH_CTL;
-			ch_data = PCH_DPC_AUX_CH_DATA1;
-			break;
-		case PORT_D:
-			ch_ctl = PCH_DPD_AUX_CH_CTL;
-			ch_data = PCH_DPD_AUX_CH_DATA1;
-			break;
-		default:
-			BUG();
-		}
-	}
-
 	intel_dp_check_edp(intel_dp);
 	/* The clock divider is based off the hrawclk,
 	 * and would like to run at 2MHz. So, take the
@@ -2786,6 +2743,13 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 	else
 		intel_connector->get_hw_state = intel_connector_get_hw_state;
 
+	if (port == PORT_A || INTEL_INFO(dev)->gen < 5) {
+		intel_dp->aux_ch_ctl_reg = DP_AUX_CH_CTL(port);
+		intel_dp->aux_ch_data_reg = DP_AUX_CH_DATA1(port);
+	} else {
+		intel_dp->aux_ch_ctl_reg = PCH_DP_AUX_CH_CTL(port);
+		intel_dp->aux_ch_data_reg = PCH_DP_AUX_CH_DATA1(port);
+	}
 
 	/* Set up the DDC bus. */
 	switch (port) {
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 7ca7772..aebb023 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -352,6 +352,8 @@ struct intel_hdmi {
 
 struct intel_dp {
 	uint32_t output_reg;
+	uint32_t aux_ch_ctl_reg;
+	uint32_t aux_ch_data_reg;
 	uint32_t DP;
 	uint8_t  link_configuration[DP_LINK_CONFIGURATION_SIZE];
 	bool has_audio;
-- 
1.7.11.7