[Intel-gfx] [PATCH] drm/i915: clean up PIPECONF bpc #defines

[Daniel Vetter]

Ilk+ somehow used #defines in near the PIPESTAT definitions, which
decently confused me. Earlier platforms called it BPP instead of
BPC. Clean this all up.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/i915_reg.h      |   15 +++++----------
 drivers/gpu/drm/i915/intel_display.c |   28 ++++++++++++++--------------
 2 files changed, 19 insertions(+), 24 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 062ca21..596d629 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2648,11 +2648,11 @@
 #define   PIPECONF_INTERLACED_DBL_ILK		(4 << 21) /* ilk/snb only */
 #define   PIPECONF_PFIT_PF_INTERLACED_DBL_ILK	(5 << 21) /* ilk/snb only */
 #define   PIPECONF_CXSR_DOWNCLOCK	(1<<16)
-#define   PIPECONF_BPP_MASK	(0x000000e0)
-#define   PIPECONF_BPP_8	(0<<5)
-#define   PIPECONF_BPP_10	(1<<5)
-#define   PIPECONF_BPP_6	(2<<5)
-#define   PIPECONF_BPP_12	(3<<5)
+#define   PIPECONF_BPC_MASK	(0x7 << 5)
+#define   PIPECONF_8BPC		(0<<5)
+#define   PIPECONF_10BPC	(1<<5)
+#define   PIPECONF_6BPC		(2<<5)
+#define   PIPECONF_12BPC	(3<<5)
 #define   PIPECONF_DITHER_EN	(1<<4)
 #define   PIPECONF_DITHER_TYPE_MASK (0x0000000c)
 #define   PIPECONF_DITHER_TYPE_SP (0<<2)
@@ -2696,11 +2696,6 @@
 #define   PIPE_START_VBLANK_INTERRUPT_STATUS	(1UL<<2) /* 965 or later */
 #define   PIPE_VBLANK_INTERRUPT_STATUS		(1UL<<1)
 #define   PIPE_OVERLAY_UPDATED_STATUS		(1UL<<0)
-#define   PIPE_BPC_MASK				(7 << 5) /* Ironlake */
-#define   PIPE_8BPC				(0 << 5)
-#define   PIPE_10BPC				(1 << 5)
-#define   PIPE_6BPC				(2 << 5)
-#define   PIPE_12BPC				(3 << 5)
 
 #define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC)
 #define PIPECONF(tran) _TRANSCODER(tran, _PIPEACONF, _PIPEBCONF)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0eb8821..02cd329 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1633,8 +1633,8 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
 		 * make the BPC in transcoder be consistent with
 		 * that in pipeconf reg.
 		 */
-		val &= ~PIPE_BPC_MASK;
-		val |= pipeconf_val & PIPE_BPC_MASK;
+		val &= ~PIPECONF_BPC_MASK;
+		val |= pipeconf_val & PIPECONF_BPC_MASK;
 	}
 
 	val &= ~TRANS_INTERLACE_MASK;
@@ -2712,7 +2712,7 @@ static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
 	temp = I915_READ(reg);
 	temp &= ~((0x7 << 19) | (0x7 << 16));
 	temp |= (intel_crtc->fdi_lanes - 1) << 19;
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
 
 	POSTING_READ(reg);
@@ -2782,7 +2782,7 @@ static void ironlake_fdi_disable(struct drm_crtc *crtc)
 	reg = FDI_RX_CTL(pipe);
 	temp = I915_READ(reg);
 	temp &= ~(0x7 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
 
 	POSTING_READ(reg);
@@ -2811,7 +2811,7 @@ static void ironlake_fdi_disable(struct drm_crtc *crtc)
 	}
 	/* BPC in FDI rx is consistent with that in PIPECONF */
 	temp &= ~(0x07 << 16);
-	temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11;
+	temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
 	I915_WRITE(reg, temp);
 
 	POSTING_READ(reg);
@@ -3046,7 +3046,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc)
 	if (HAS_PCH_CPT(dev) &&
 	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) ||
 	     intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) {
-		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) >> 5;
+		u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
 		reg = TRANS_DP_CTL(pipe);
 		temp = I915_READ(reg);
 		temp &= ~(TRANS_DP_PORT_SEL_MASK |
@@ -4628,10 +4628,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 	}
 
 	/* default to 8bpc */
-	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+	pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN);
 	if (is_dp) {
 		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_BPP_6 |
+			pipeconf |= PIPECONF_6BPC |
 				    PIPECONF_DITHER_EN |
 				    PIPECONF_DITHER_TYPE_SP;
 		}
@@ -4639,7 +4639,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 
 	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
 		if (adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
-			pipeconf |= PIPECONF_BPP_6 |
+			pipeconf |= PIPECONF_6BPC |
 					PIPECONF_ENABLE |
 					I965_PIPECONF_ACTIVE;
 		}
@@ -5022,19 +5022,19 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,
 
 	val = I915_READ(PIPECONF(pipe));
 
-	val &= ~PIPE_BPC_MASK;
+	val &= ~PIPECONF_BPC_MASK;
 	switch (intel_crtc->bpp) {
 	case 18:
-		val |= PIPE_6BPC;
+		val |= PIPECONF_6BPC;
 		break;
 	case 24:
-		val |= PIPE_8BPC;
+		val |= PIPECONF_8BPC;
 		break;
 	case 30:
-		val |= PIPE_10BPC;
+		val |= PIPECONF_10BPC;
 		break;
 	case 36:
-		val |= PIPE_12BPC;
+		val |= PIPECONF_12BPC;
 		break;
 	default:
 		/* Case prevented by intel_choose_pipe_bpp_dither. */
-- 
1.7.10.4