[Intel-gfx] [PATCH v2] tests/testdisplay: Specify the display.

[Ben Widawsky]

On Thu, 27 Dec 2012 01:45:59 +0000
"Sun, Yi" <yi.sun at intel.com> wrote:

> 
> 
> Thanks
>     --Sun, Yi

Ah, misunderstood the commit message. It looks good to me. Do you have
push access?

> 
> > -----Original Message-----
> > From: Ben Widawsky [mailto:ben at bwidawsk.net]
> > Sent: Thursday, December 27, 2012 2:56 AM
> > To: Sun, Yi
> > Cc: intel-gfx at lists.freedesktop.org
> > Subject: Re: [Intel-gfx] [PATCH v2] tests/testdisplay: Specify the
> > display.
> > 
> > On Wed, 26 Dec 2012 17:22:57 +0800
> > Yi Sun <yi.sun at intel.com> wrote:
> > 
> > > It can specify the display when use option '-o'.
> > > E.g. command "./testdiplay -o 1,4" means setting number 4 mode
> > > line on the
> > number 1 display.
> > >
> > > v2. Specify the display by id which can be got from option '-i'
> > 
> > where?
> [Sun, Yi] Run ./testdisplay -i , we can got following:
> Connectors:
> id      encoder status          type    size (mm)       modes
> 7       0       disconnected    VGA     0x0             0
> 10      0       disconnected    HDMI-A  0x0             0
> 13      0       disconnected    DisplayPort     0x0             0
> 16      0       disconnected    HDMI-A  0x0             0
> 18      17      connected       HDMI-A  480x270         31
>   modes:
>   name refresh (Hz) hdisp hss hse htot vdisp vss vse vtot flags type
> clock ......
> 
> I meant we can specify a display by the connector id which list as
> the first column.
> 
> Thanks
> 	--Sun, Yi
> 
> > 
> > >
> > > Signed-off-by: Yi Sun <yi.sun at intel.com>
> > >
> > > diff --git a/tests/testdisplay.c b/tests/testdisplay.c index
> > > 7287487..7aef940 100644
> > > --- a/tests/testdisplay.c
> > > +++ b/tests/testdisplay.c
> > > @@ -72,7 +72,7 @@ int dump_info = 0, test_all_modes =0,
> > > test_preferred_mode = 0, force_mode = 0,  int sleep_between_modes
> > > = 5; uint32_t depth = 24, stride, bpp;  int qr_code = 0; -int
> > > only_one_mode = 0, specified_mode_num = 0;
> > > +int only_one_mode = 0, specified_mode_num = 0, specified_disp_id
> > > = 0;
> > >
> > >  drmModeModeInfo force_timing;
> > >
> > > @@ -598,6 +598,9 @@ int update_display(void)
> > >  		/* Find any connected displays */
> > >  		for (c = 0; c < resources->count_connectors;
> > > c++) { connectors[c].id = resources->connectors[c];
> > > +			if ( connectors[c].id !=
> > > specified_disp_id )
> > > +				continue;
> > > +
> > >  			set_mode(&connectors[c]);
> > >  		}
> > >  	}
> > > @@ -618,7 +621,7 @@ static void __attribute__((noreturn))
> > > usage(char
> > *name)
> > >  	fprintf(stderr, "\t-m\ttest the preferred mode\n");
> > >  	fprintf(stderr, "\t-t\tuse a tiled framebuffer\n");
> > >  	fprintf(stderr, "\t-r\tprint a QR code on the screen
> > > whose content is
> > \"pass\" for the automatic test\n");
> > > -	fprintf(stderr, "\t-o\t<number of the mode>\tonly test
> > > specified mode\n");
> > > +	fprintf(stderr, "\t-o\t<id of the display>,<number of the
> > > +mode>\tonly test specified mode on the specified display\n");
> > >  	fprintf(stderr, "\t-f\t<clock
> > MHz>,<hdisp>,<hsync-start>,<hsync-end>,<htotal>,\n");
> > >  	fprintf(stderr,
> > > "\t\t<vdisp>,<vsync-start>,<vsync-end>,<vtotal>\n");
> > > fprintf(stderr, "\t\ttest force mode\n"); @@ -715,7 +718,7 @@ int
> > > main(int argc, char **argv) break;
> > >  		case 'o':
> > >  			only_one_mode = 1;
> > > -			specified_mode_num = atoi(optarg);
> > > +			sscanf(optarg, "%d,%d",
> > > &specified_disp_id,
> > &specified_mode_num);
> > >  			break;
> > >  		default:
> > >  			fprintf(stderr, "unknown option %c\n",
> > > c);
> > 
> > 
> > 
> > --
> > Ben Widawsky, Intel Open Source Technology Center