[Intel-gfx] [PATCH 0/8] interlaced support v2

[Angela Schmid]

Hello Daniel

I also want to confirm that interlacing is working over HDMI with 1920x1080i at 50hz for Sandy Bridge 2600k. Thanks a lot.

The fixes are not part of the intel gfx driver, correct ?
When will it be pushed and to which kernel release will it presumably be addressed to.

Angela


> -----Original Message-----
> From: intel-gfx-bounces+angela.schmid=wolke7.net at lists.freedesktop.org [mailto:intel-gfx-
> bounces+angela.schmid=wolke7.net at lists.freedesktop.org] On Behalf Of Alfonso Fiore
> Sent: 28 January 2012 19:30
> To: Daniel Vetter
> Cc: Intel Graphics Development
> Subject: Re: [Intel-gfx] [PATCH 0/8] interlaced support v2
> 
> On Sat, Jan 28, 2012 at 2:49 PM, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> > Hi all,
> >
> > These are the patches I'd like to queue to -next for interlaced support. Needs
> > the patch "fixup interlaced bits clearing in PIPECONF on PCH_SPLIT" and also the
> > drm core fix "drm/modes: do not enforce an odd vtotal for interlaced modes" if
> > you want to use interlaced modelines with an even vtotal.
> >
> > The entire series is available in my interlaced branch at
> >
> > http://cgit.freedesktop.org/~danvet/drm/log/?h=interlaced
> >
> > Review, comments and testing highly welcome.
> 
> Tested-by: Alfonso Fiore <alfonso.fiore at gmail.com>
> 
> i3 2130 connected to a Philips 32pf9731d over HDMI:
> - 1920x1080i at 30Hz
> - 1280x720p at 60Hz
> - 1024x768p at 60Hz
> 
> thanks again,
> alfonso
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx