[Intel-gfx] i915 SNB: hotplug events when charging causing poor interactivity

Daniel J Blueman daniel at quora.org
Tue Feb 21 14:37:37 CET 2012


On 16 February 2012 13:07, Daniel Vetter <daniel at ffwll.ch> wrote:
> On Thu, Feb 16, 2012 at 11:44:46AM +0000, Daniel J Blueman wrote:
>> When charging Dell E5420 laptops, I see the Sandy Bridge South Display
>> Engine port C hotplug interrupt fire consistently at around 20Hz. Each
[]
>> Notably, when only using battery or only using AC, the port C
>> interrupts don't fire. It feels like the platform is using South
>> Display Port C for GPIO/I2C; setting the port C pulse duration from
>> 2ms to 100ms doesn't change the behaviour. I'll dump off the GPIO
>> settings, but what else is good to debug this?
>
> Yep, dumping the register state (intel_reg_dumper from intel-gpu-tools is
> handy for that) in the different situations sounds useful.
[]
> If this is indeed the bios we need to quirk this away. But I think we
> should check first whether we don't butcher something else accidently.

When charging the battery, I see the SDE_PORTB_HOTPLUG, PORTC, PORTD
and SDE_AUX_MASK bits set (sometimes at different times) at ~20Hz
until the battery is charged, which is disconcerting.

Hotplugging a HDMI cable, SDE_PORTB_HOTPLUG and SDE_AUX_MASK bits are
set once, so we can't mask these on this platform.

Attached are the reg dumps. We see the backlight register
(BLC_PWM_CPU_CTL) and the A surface register (DSPASURF) vary across
multiple reads as expected.

Any ideas?

Daniel
-- 
Daniel J Blueman
-------------- next part --------------
                    PGETBL_CTL: 0x00000000
               GEN6_INSTDONE_1: 0xfffffffe
               GEN6_INSTDONE_2: 0xffffffff
                  CPU_VGACNTRL: 0x80000000 (disabled)
    DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
                     RR_HW_CTL: 0x00000000 (low 0, high 0)
                FDI_PLL_BIOS_0: 0xffffffff
                FDI_PLL_BIOS_1: 0xffffffff
                FDI_PLL_BIOS_2: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_0: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_1: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_2: 0xffffffff
              FDI_PLL_FREQ_CTL: 0xffffffff
                     PIPEACONF: 0xc0000050 (enabled, active, 6bpc)
                      HTOTAL_A: 0x080d063f (1600 active, 2062 total)
                      HBLANK_A: 0x080d063f (1600 start, 2062 end)
                       HSYNC_A: 0x06a9067f (1664 start, 1706 end)
                      VTOTAL_A: 0x039b0383 (900 active, 924 total)
                      VBLANK_A: 0x039b0383 (900 start, 924 end)
                       VSYNC_A: 0x03890386 (903 start, 906 end)
                  VSYNCSHIFT_A: 0x00000000
                      PIPEASRC: 0x063f0383 (1600, 900)
                 PIPEA_DATA_M1: 0x7e1f6bc0 (TU 64, val 0x1f6bc0 2059200)
                 PIPEA_DATA_N1: 0x0041eb00 (val 0x41eb00 4320000)
                 PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_M1: 0x0001bee0 (val 0x1bee0 114400)
                 PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
                 PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
                      DSPACNTR: 0xd8004400 (enabled)
                      DSPABASE: 0x00000000
                    DSPASTRIDE: 0x00001a00 (104)
                      DSPASURF: 0x005e7000
                   DSPATILEOFF: 0x00000000 (0, 0)
                     PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
                      HTOTAL_B: 0x00000000 (1 active, 1 total)
                      HBLANK_B: 0x00000000 (1 start, 1 end)
                       HSYNC_B: 0x00000000 (1 start, 1 end)
                      VTOTAL_B: 0x00000000 (1 active, 1 total)
                      VBLANK_B: 0x00000000 (1 start, 1 end)
                       VSYNC_B: 0x00000000 (1 start, 1 end)
                  VSYNCSHIFT_B: 0x00000000
                      DSPBCNTR: 0x00004000 (disabled)
                      DSPBBASE: 0x00000000
                    DSPBSTRIDE: 0x00000000 (0)
                      DSPBSURF: 0x00000000
                   DSPBTILEOFF: 0x00000000 (0, 0)
                      PIPEBSRC: 0x00000000 (1, 1)
                 PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
                 PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
                     PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFA_CTL_2: 0x00007e3e (vscale 0.986267)
                     PFA_CTL_3: 0x00003f1f (vscale initial phase 0.493134)
                     PFA_CTL_4: 0x00007ce0 (hscale 0.975586)
                   PFA_WIN_POS: 0x00000000 (0, 0)
                  PFA_WIN_SIZE: 0x00000000 (0, 0)
                     PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFB_CTL_2: 0x00000000 (vscale 0.000000)
                     PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
                     PFB_CTL_4: 0x00000000 (hscale 0.000000)
                   PFB_WIN_POS: 0x00000000 (0, 0)
                  PFB_WIN_SIZE: 0x00000000 (0, 0)
              PCH_DREF_CONTROL: 0x00001402 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 enable, ssc4 disable)
               PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
              PCH_DPLL_TMR_CFG: 0x0271186a
                PCH_SSC4_PARMS: 0x01204860
            PCH_SSC4_AUX_PARMS: 0x000029c5
                  PCH_DPLL_SEL: 0x00000008 (TransA DPLL enable (DPLL A), TransB DPLL disable (DPLL (null)))
           PCH_DPLL_ANALOG_CTL: 0x00008000
                    PCH_DPLL_A: 0x89086008 (enable, sdvo high speed no, mode LVDS, p2 Div 7, FPA0 P1 4, FPA1 P1 4, refclk SSC, sdvo/hdmi mul 1)
                    PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
                      PCH_FPA0: 0x00010c08 (n = 1, m1 = 12, m2 = 8)
                      PCH_FPA1: 0x00010c08 (n = 1, m1 = 12, m2 = 8)
                      PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                      PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                TRANS_HTOTAL_A: 0x080d063f (1600 active, 2062 total)
                TRANS_HBLANK_A: 0x080d063f (1600 start, 2062 end)
                 TRANS_HSYNC_A: 0x06a9067f (1664 start, 1706 end)
                TRANS_VTOTAL_A: 0x039b0383 (900 active, 924 total)
                TRANS_VBLANK_A: 0x039b0383 (900 start, 924 end)
                 TRANS_VSYNC_A: 0x03890386 (903 start, 906 end)
                TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_B: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_VSYNC_B: 0x00000000 (1 start, 1 end)
                TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
                TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
                    TRANSACONF: 0xc0000000 (enable, active)
                    TRANSBCONF: 0x00000000 (disable, inactive)
                    TRANSCCONF: 0x00000000 (disable, inactive)
                   FDI_TXA_CTL: 0xb00c4000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis 0dB, port width X2, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
                   FDI_TXB_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_RXA_CTL: 0x800a2350 (enable, train pattern not train, port width X2, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report enable, FE err report enable,scrambing enable, enhanced framing enable, PCDClk)
                   FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                   FDI_RXC_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                  FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXC_MISC: 0x00000080 (FDI Delay 128)
               FDI_RXA_TUSIZE1: 0x7e000000
               FDI_RXA_TUSIZE2: 0x7e000000
               FDI_RXB_TUSIZE1: 0x7e000000
               FDI_RXB_TUSIZE2: 0x7e000000
               FDI_RXC_TUSIZE1: 0x7e000000
               FDI_RXC_TUSIZE2: 0x7e000000
                 FDI_PLL_CTL_1: 0x7e000000
                 FDI_PLL_CTL_2: 0x7e000000
                   FDI_RXA_IIR: 0x00000000
                   FDI_RXA_IMR: 0x000008ff
                   FDI_RXB_IIR: 0x00000000
                   FDI_RXB_IMR: 0x000008ff
                      PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync)
                         HDMIB: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                         HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                         HDMID: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                      PCH_LVDS: 0x8020033e (enabled, pipe A, 18 bit, 2 channels)
                     CPU_eDP_A: 0x00000018
                      PCH_DP_B: 0x00000004
                      PCH_DP_C: 0x00000004
                      PCH_DP_D: 0x00000004
                TRANS_DP_CTL_A: 0x60000418 (disable port none 6bpc +vsync +hsync)
                TRANS_DP_CTL_B: 0x60000018 (disable port none 8bpc +vsync +hsync)
                TRANS_DP_CTL_C: 0x60000018 (disable port none 8bpc +vsync +hsync)
              BLC_PWM_CPU_CTL2: 0x80000000
               BLC_PWM_CPU_CTL: 0x00001312
              BLC_PWM_PCH_CTL1: 0x80000000
              BLC_PWM_PCH_CTL2: 0x13121312
                 PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
                PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on)
              PCH_PP_ON_DELAYS: 0x019008fc
             PCH_PP_OFF_DELAYS: 0x019008fc
                PCH_PP_DIVISOR: 0x00186906
-------------- next part --------------
                    PGETBL_CTL: 0x00000000
               GEN6_INSTDONE_1: 0xfffffffe
               GEN6_INSTDONE_2: 0xffffffff
                  CPU_VGACNTRL: 0x80000000 (disabled)
    DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
                     RR_HW_CTL: 0x00000000 (low 0, high 0)
                FDI_PLL_BIOS_0: 0xffffffff
                FDI_PLL_BIOS_1: 0xffffffff
                FDI_PLL_BIOS_2: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_0: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_1: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_2: 0xffffffff
              FDI_PLL_FREQ_CTL: 0xffffffff
                     PIPEACONF: 0xc0000050 (enabled, active, 6bpc)
                      HTOTAL_A: 0x080d063f (1600 active, 2062 total)
                      HBLANK_A: 0x080d063f (1600 start, 2062 end)
                       HSYNC_A: 0x06a9067f (1664 start, 1706 end)
                      VTOTAL_A: 0x039b0383 (900 active, 924 total)
                      VBLANK_A: 0x039b0383 (900 start, 924 end)
                       VSYNC_A: 0x03890386 (903 start, 906 end)
                  VSYNCSHIFT_A: 0x00000000
                      PIPEASRC: 0x063f0383 (1600, 900)
                 PIPEA_DATA_M1: 0x7e1f6bc0 (TU 64, val 0x1f6bc0 2059200)
                 PIPEA_DATA_N1: 0x0041eb00 (val 0x41eb00 4320000)
                 PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_M1: 0x0001bee0 (val 0x1bee0 114400)
                 PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
                 PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
                      DSPACNTR: 0xd8004400 (enabled)
                      DSPABASE: 0x00000000
                    DSPASTRIDE: 0x00001a00 (104)
                      DSPASURF: 0x05391000
                   DSPATILEOFF: 0x00000000 (0, 0)
                     PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
                      HTOTAL_B: 0x00000000 (1 active, 1 total)
                      HBLANK_B: 0x00000000 (1 start, 1 end)
                       HSYNC_B: 0x00000000 (1 start, 1 end)
                      VTOTAL_B: 0x00000000 (1 active, 1 total)
                      VBLANK_B: 0x00000000 (1 start, 1 end)
                       VSYNC_B: 0x00000000 (1 start, 1 end)
                  VSYNCSHIFT_B: 0x00000000
                      DSPBCNTR: 0x00004000 (disabled)
                      DSPBBASE: 0x00000000
                    DSPBSTRIDE: 0x00000000 (0)
                      DSPBSURF: 0x00000000
                   DSPBTILEOFF: 0x00000000 (0, 0)
                      PIPEBSRC: 0x00000000 (1, 1)
                 PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
                 PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
                     PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFA_CTL_2: 0x00007e3e (vscale 0.986267)
                     PFA_CTL_3: 0x00003f1f (vscale initial phase 0.493134)
                     PFA_CTL_4: 0x00007ce0 (hscale 0.975586)
                   PFA_WIN_POS: 0x00000000 (0, 0)
                  PFA_WIN_SIZE: 0x00000000 (0, 0)
                     PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFB_CTL_2: 0x00000000 (vscale 0.000000)
                     PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
                     PFB_CTL_4: 0x00000000 (hscale 0.000000)
                   PFB_WIN_POS: 0x00000000 (0, 0)
                  PFB_WIN_SIZE: 0x00000000 (0, 0)
              PCH_DREF_CONTROL: 0x00001402 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 enable, ssc4 disable)
               PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
              PCH_DPLL_TMR_CFG: 0x0271186a
                PCH_SSC4_PARMS: 0x01204860
            PCH_SSC4_AUX_PARMS: 0x000029c5
                  PCH_DPLL_SEL: 0x00000008 (TransA DPLL enable (DPLL A), TransB DPLL disable (DPLL (null)))
           PCH_DPLL_ANALOG_CTL: 0x00008000
                    PCH_DPLL_A: 0x89086008 (enable, sdvo high speed no, mode LVDS, p2 Div 7, FPA0 P1 4, FPA1 P1 4, refclk SSC, sdvo/hdmi mul 1)
                    PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
                      PCH_FPA0: 0x00010c08 (n = 1, m1 = 12, m2 = 8)
                      PCH_FPA1: 0x00010c08 (n = 1, m1 = 12, m2 = 8)
                      PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                      PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                TRANS_HTOTAL_A: 0x080d063f (1600 active, 2062 total)
                TRANS_HBLANK_A: 0x080d063f (1600 start, 2062 end)
                 TRANS_HSYNC_A: 0x06a9067f (1664 start, 1706 end)
                TRANS_VTOTAL_A: 0x039b0383 (900 active, 924 total)
                TRANS_VBLANK_A: 0x039b0383 (900 start, 924 end)
                 TRANS_VSYNC_A: 0x03890386 (903 start, 906 end)
                TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_B: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_VSYNC_B: 0x00000000 (1 start, 1 end)
                TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
                TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
                    TRANSACONF: 0xc0000000 (enable, active)
                    TRANSBCONF: 0x00000000 (disable, inactive)
                    TRANSCCONF: 0x00000000 (disable, inactive)
                   FDI_TXA_CTL: 0xb00c4000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis 0dB, port width X2, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
                   FDI_TXB_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_RXA_CTL: 0x800a2350 (enable, train pattern not train, port width X2, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report enable, FE err report enable,scrambing enable, enhanced framing enable, PCDClk)
                   FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                   FDI_RXC_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                  FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXC_MISC: 0x00000080 (FDI Delay 128)
               FDI_RXA_TUSIZE1: 0x7e000000
               FDI_RXA_TUSIZE2: 0x7e000000
               FDI_RXB_TUSIZE1: 0x7e000000
               FDI_RXB_TUSIZE2: 0x7e000000
               FDI_RXC_TUSIZE1: 0x7e000000
               FDI_RXC_TUSIZE2: 0x7e000000
                 FDI_PLL_CTL_1: 0x7e000000
                 FDI_PLL_CTL_2: 0x7e000000
                   FDI_RXA_IIR: 0x00000000
                   FDI_RXA_IMR: 0x000008ff
                   FDI_RXB_IIR: 0x00000000
                   FDI_RXB_IMR: 0x000008ff
                      PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync)
                         HDMIB: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                         HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                         HDMID: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                      PCH_LVDS: 0x8020033e (enabled, pipe A, 18 bit, 2 channels)
                     CPU_eDP_A: 0x00000018
                      PCH_DP_B: 0x00000004
                      PCH_DP_C: 0x00000004
                      PCH_DP_D: 0x00000004
                TRANS_DP_CTL_A: 0x60000418 (disable port none 6bpc +vsync +hsync)
                TRANS_DP_CTL_B: 0x60000018 (disable port none 8bpc +vsync +hsync)
                TRANS_DP_CTL_C: 0x60000018 (disable port none 8bpc +vsync +hsync)
              BLC_PWM_CPU_CTL2: 0x80000000
               BLC_PWM_CPU_CTL: 0x00001312
              BLC_PWM_PCH_CTL1: 0x80000000
              BLC_PWM_PCH_CTL2: 0x13121312
                 PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
                PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on)
              PCH_PP_ON_DELAYS: 0x019008fc
             PCH_PP_OFF_DELAYS: 0x019008fc
                PCH_PP_DIVISOR: 0x00186906
-------------- next part --------------
                    PGETBL_CTL: 0x00000000
               GEN6_INSTDONE_1: 0xfffffffe
               GEN6_INSTDONE_2: 0xffffffff
                  CPU_VGACNTRL: 0x80000000 (disabled)
    DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
                     RR_HW_CTL: 0x00000000 (low 0, high 0)
                FDI_PLL_BIOS_0: 0xffffffff
                FDI_PLL_BIOS_1: 0xffffffff
                FDI_PLL_BIOS_2: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_0: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_1: 0xffffffff
       DISPLAY_PORT_PLL_BIOS_2: 0xffffffff
              FDI_PLL_FREQ_CTL: 0xffffffff
                     PIPEACONF: 0xc0000050 (enabled, active, 6bpc)
                      HTOTAL_A: 0x080d063f (1600 active, 2062 total)
                      HBLANK_A: 0x080d063f (1600 start, 2062 end)
                       HSYNC_A: 0x06a9067f (1664 start, 1706 end)
                      VTOTAL_A: 0x039b0383 (900 active, 924 total)
                      VBLANK_A: 0x039b0383 (900 start, 924 end)
                       VSYNC_A: 0x03890386 (903 start, 906 end)
                  VSYNCSHIFT_A: 0x00000000
                      PIPEASRC: 0x063f0383 (1600, 900)
                 PIPEA_DATA_M1: 0x7e1f6bc0 (TU 64, val 0x1f6bc0 2059200)
                 PIPEA_DATA_N1: 0x0041eb00 (val 0x41eb00 4320000)
                 PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_M1: 0x0001bee0 (val 0x1bee0 114400)
                 PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
                 PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
                      DSPACNTR: 0xd8004400 (enabled)
                      DSPABASE: 0x00000000
                    DSPASTRIDE: 0x00001a00 (104)
                      DSPASURF: 0x05391000
                   DSPATILEOFF: 0x00000000 (0, 0)
                     PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
                      HTOTAL_B: 0x00000000 (1 active, 1 total)
                      HBLANK_B: 0x00000000 (1 start, 1 end)
                       HSYNC_B: 0x00000000 (1 start, 1 end)
                      VTOTAL_B: 0x00000000 (1 active, 1 total)
                      VBLANK_B: 0x00000000 (1 start, 1 end)
                       VSYNC_B: 0x00000000 (1 start, 1 end)
                  VSYNCSHIFT_B: 0x00000000
                      DSPBCNTR: 0x00004000 (disabled)
                      DSPBBASE: 0x00000000
                    DSPBSTRIDE: 0x00000000 (0)
                      DSPBSURF: 0x00000000
                   DSPBTILEOFF: 0x00000000 (0, 0)
                      PIPEBSRC: 0x00000000 (1, 1)
                 PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
                 PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                 PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
                 PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
                     PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFA_CTL_2: 0x00007e3e (vscale 0.986267)
                     PFA_CTL_3: 0x00003f1f (vscale initial phase 0.493134)
                     PFA_CTL_4: 0x00007ce0 (hscale 0.975586)
                   PFA_WIN_POS: 0x00000000 (0, 0)
                  PFA_WIN_SIZE: 0x00000000 (0, 0)
                     PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
                     PFB_CTL_2: 0x00000000 (vscale 0.000000)
                     PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
                     PFB_CTL_4: 0x00000000 (hscale 0.000000)
                   PFB_WIN_POS: 0x00000000 (0, 0)
                  PFB_WIN_SIZE: 0x00000000 (0, 0)
              PCH_DREF_CONTROL: 0x00001402 (cpu source disable, ssc_source enable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 enable, ssc4 disable)
               PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
              PCH_DPLL_TMR_CFG: 0x0271186a
                PCH_SSC4_PARMS: 0x01204860
            PCH_SSC4_AUX_PARMS: 0x000029c5
                  PCH_DPLL_SEL: 0x00000008 (TransA DPLL enable (DPLL A), TransB DPLL disable (DPLL (null)))
           PCH_DPLL_ANALOG_CTL: 0x00008000
                    PCH_DPLL_A: 0x89086008 (enable, sdvo high speed no, mode LVDS, p2 Div 7, FPA0 P1 4, FPA1 P1 4, refclk SSC, sdvo/hdmi mul 1)
                    PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
                      PCH_FPA0: 0x00010c08 (n = 1, m1 = 12, m2 = 8)
                      PCH_FPA1: 0x00010c08 (n = 1, m1 = 12, m2 = 8)
                      PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                      PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
                TRANS_HTOTAL_A: 0x080d063f (1600 active, 2062 total)
                TRANS_HBLANK_A: 0x080d063f (1600 start, 2062 end)
                 TRANS_HSYNC_A: 0x06a9067f (1664 start, 1706 end)
                TRANS_VTOTAL_A: 0x039b0383 (900 active, 924 total)
                TRANS_VBLANK_A: 0x039b0383 (900 start, 924 end)
                 TRANS_VSYNC_A: 0x03890386 (903 start, 906 end)
                TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_B: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_B: 0x00000000 (1 start, 1 end)
                 TRANS_VSYNC_B: 0x00000000 (1 start, 1 end)
                TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
                TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
                TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
                TRANS_VBLANK_C: 0x00000000 (1 start, 1 end)
                 TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
                TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
                TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
                TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
             TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
                    TRANSACONF: 0xc0000000 (enable, active)
                    TRANSBCONF: 0x00000000 (disable, inactive)
                    TRANSCCONF: 0x00000000 (disable, inactive)
                   FDI_TXA_CTL: 0xb00c4000 (enable, train pattern not train, voltage swing 0.4V,pre-emphasis 0dB, port width X2, enhanced framing enable, FDI PLL enable, scrambing enable, master mode disable)
                   FDI_TXB_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
                   FDI_RXA_CTL: 0x800a2350 (enable, train pattern not train, port width X2, 6bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL enable,FS ecc disable, FE ecc disable, FS err report enable, FE err report enable,scrambing enable, enhanced framing enable, PCDClk)
                   FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                   FDI_RXC_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
                  FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
                  FDI_RXC_MISC: 0x00000080 (FDI Delay 128)
               FDI_RXA_TUSIZE1: 0x7e000000
               FDI_RXA_TUSIZE2: 0x7e000000
               FDI_RXB_TUSIZE1: 0x7e000000
               FDI_RXB_TUSIZE2: 0x7e000000
               FDI_RXC_TUSIZE1: 0x7e000000
               FDI_RXC_TUSIZE2: 0x7e000000
                 FDI_PLL_CTL_1: 0x7e000000
                 FDI_PLL_CTL_2: 0x7e000000
                   FDI_RXA_IIR: 0x00000000
                   FDI_RXA_IMR: 0x000008ff
                   FDI_RXB_IIR: 0x00000000
                   FDI_RXB_IMR: 0x000008ff
                      PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync)
                         HDMIB: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                         HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                         HDMID: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
                      PCH_LVDS: 0x8020033e (enabled, pipe A, 18 bit, 2 channels)
                     CPU_eDP_A: 0x00000018
                      PCH_DP_B: 0x00000004
                      PCH_DP_C: 0x00000004
                      PCH_DP_D: 0x00000004
                TRANS_DP_CTL_A: 0x60000418 (disable port none 6bpc +vsync +hsync)
                TRANS_DP_CTL_B: 0x60000018 (disable port none 8bpc +vsync +hsync)
                TRANS_DP_CTL_C: 0x60000018 (disable port none 8bpc +vsync +hsync)
              BLC_PWM_CPU_CTL2: 0x80000000
               BLC_PWM_CPU_CTL: 0x00000218
              BLC_PWM_PCH_CTL1: 0x80000000
              BLC_PWM_PCH_CTL2: 0x13121312
                 PCH_PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
                PCH_PP_CONTROL: 0xabcd0003 (blacklight disabled, power down on reset, panel on)
              PCH_PP_ON_DELAYS: 0x019008fc
             PCH_PP_OFF_DELAYS: 0x019008fc
                PCH_PP_DIVISOR: 0x00186906


More information about the Intel-gfx mailing list