[Intel-gfx] [PATCH 04/43] drm/i915: add direct encoder disable/enable infrastructure
Daniel Vetter
daniel.vetter at ffwll.ch
Tue Jul 3 11:27:56 CEST 2012
Just prep work, not yet put to some use.
Note that because we're still using the crtc helper to switch modes
(and their complicated way to do partial modesets), we need to call
the encoder's disable function unconditionally.
But once this is cleaned up we should call the encoder's disable
function unconditionally, because then we know that we'll only call it
if the encoder is actually enabled. Also note that we then need to be
careful about which crtc we're filtering the encoder list on: We want
to filter on the crtc of the _current_ mode, not the one we're about
to set up.
For the enabling side we need to do the same trick. And again, we
should be able to simplify this quite a bit when things have settled
into place.
Also note that this simply does not take cloning into account, so dpms
needs to be handled specially for the few outputs where we even bother
with it.
Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 38 ++++++++++++++++++++++++++++++++-
drivers/gpu/drm/i915/intel_drv.h | 2 +
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 608046f..58fda88 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3147,13 +3147,16 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
u32 temp;
bool is_pch_port;
+ /* XXX: For compatability with the crtc helper code, call the encoder's
+ * enable function unconditionally for now. */
if (intel_crtc->active)
- return;
+ goto encoders;
intel_crtc->active = true;
intel_update_watermarks(dev);
@@ -3200,6 +3203,12 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc)
mutex_unlock(&dev->struct_mutex);
intel_crtc_update_cursor(crtc, true);
+
+encoders:
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ if (encoder->enable)
+ encoder->enable(encoder);
+ }
}
static void ironlake_crtc_disable(struct drm_crtc *crtc)
@@ -3207,10 +3216,18 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
u32 reg, temp;
+ /* XXX: For compatability with the crtc helper code, call the encoder's
+ * disable function unconditionally for now. */
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ if (encoder->disable)
+ encoder->disable(encoder);
+ }
+
if (!intel_crtc->active)
return;
@@ -3328,11 +3345,14 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
+ /* XXX: For compatability with the crtc helper code, call the encoder's
+ * enable function unconditionally for now. */
if (intel_crtc->active)
- return;
+ goto encoders;
intel_crtc->active = true;
intel_update_watermarks(dev);
@@ -3347,6 +3367,12 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
/* Give the overlay scaler a chance to enable if it's on this pipe */
intel_crtc_dpms_overlay(intel_crtc, true);
intel_crtc_update_cursor(crtc, true);
+
+encoders:
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ if (encoder->enable)
+ encoder->enable(encoder);
+ }
}
static void i9xx_crtc_disable(struct drm_crtc *crtc)
@@ -3354,9 +3380,17 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_encoder *encoder;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
+ /* XXX: For compatability with the crtc helper code, call the encoder's
+ * disable function unconditionally for now. */
+ for_each_encoder_on_crtc(dev, crtc, encoder) {
+ if (encoder->disable)
+ encoder->disable(encoder);
+ }
+
if (!intel_crtc->active)
return;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index cc1573b..7224f4d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -153,6 +153,8 @@ struct intel_encoder {
int type;
bool needs_tv_clock;
void (*hot_plug)(struct intel_encoder *);
+ void (*enable)(struct intel_encoder *);
+ void (*disable)(struct intel_encoder *);
int crtc_mask;
int clone_mask;
};
--
1.7.7.6
More information about the Intel-gfx
mailing list