[Intel-gfx] [PATCH 46/81] drm/i915: ensure the force pipe A quirk is actually followed
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Jul 11 16:28:29 CEST 2012
Many BIOSen forget to turn on the pipe A after resume (because they
actually don't turn on anything), so we have to do that ourselves when
sanitizing the hw state.
I've discovered this due to the recent addition of a pipe WARN that
takes the force quirk into account.
v2: Actually try to enable the pipe with a proper configuration instead
of simpyl switching it on with whatever random state the bios left it
in after resume.
Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 38 ++++++++++++++++++++++++++++++++++
1 files changed, 38 insertions(+), 0 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 649d327..08d3684 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7630,6 +7630,35 @@ intel_connector_break_all_links(struct intel_connector *connector)
connector->encoder->base.crtc = NULL;
}
+static void intel_enable_pipe_a(struct drm_device *dev)
+{
+ struct intel_connector *connector;
+ struct drm_connector *crt = NULL;
+ struct intel_load_detect_pipe load_detect_temp;
+
+ /* We can't just switch on the pipe A, we need to set things up with a
+ * proper mode and output configuration. As a gross hack, enable pipe A
+ * by enabling the load detect pipe once. */
+ list_for_each_entry(connector,
+ &dev->mode_config.connector_list,
+ base.head) {
+ if (connector->encoder->type == INTEL_OUTPUT_ANALOG) {
+ crt = &connector->base;
+ break;
+ }
+ }
+
+ if (!crt)
+ return;
+
+ if (intel_get_load_detect_pipe(intel_attached_encoder(crt),
+ crt, NULL, &load_detect_temp))
+ intel_release_load_detect_pipe(intel_attached_encoder(crt),
+ crt, &load_detect_temp);
+
+
+}
+
static void intel_sanitize_crtc(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
@@ -7676,6 +7705,15 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
}
ok:
+ if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
+ crtc->pipe == PIPE_A && !crtc->active) {
+ /* BIOS forgot to enable pipe A, this mostly happens after
+ * resume. Force-enable the pipe to fix this, the update_dpms
+ * call below we restore the pipe to the right state, but leave
+ * the required bits on. */
+ intel_enable_pipe_a(dev);
+ }
+
/* Adjust the state of the output pipe according to whether we
* have active connectors/encoders. */
intel_crtc_update_dpms(&crtc->base);
--
1.7.7.6
More information about the Intel-gfx
mailing list