[Intel-gfx] [PATCH 00/76] modeset rework, lightly reworked

[Daniel Vetter]

Hi all,

Mostly just rebased, but a few bikesheds from Paulo incorporated. I've also
moved the patches that can go in early to the front (the first 8 patches).

Bigger changes since last time around:
- added support for the newly merged ns2501 dvo controller
- s/intel_crtc_set_mode/intel_set_mode/
- fixed up a fb helper issue that Paulo has hit

Not tested on my full set of machines, so if I'm a doofus I've botched it up
with a rebase mistake somewhere.

Review, flames and test reports highly welcome.

/me heads off

Cheers, Daniel

Daniel Vetter (76):
  drm/fb-helper: don't clobber output routing in setup_crtcs
  drm/i915: add missing gen2 pipe A quirk entries
  drm/i915/ns2501: kill pll A enabling hack
  drm/i915: rip out the overlay pipe A workaround
  drm/i915: prepare load-detect pipe code for dpms changes
  drm/i915: simplify dvo dpms interface
  drm/i915: kill a few unused things in dev_priv
  drm/i915: extract ironlake_fdi_pll_disable
  drm/i915: add crtc->enable/disable vfuncs insted of dpms
  drm/i915: rip out crtc prepare/commit indirection
  drm/i915: add direct encoder disable/enable infrastructure
  drm/i915/hdmi: convert to encoder->disable/enable
  drm/i915/tv: convert to encoder enable/disable
  drm/i915/lvds: convert to encoder disable/enable
  drm/i915/dp: convert to encoder disable/enable
  drm/i915/crt: convert to encoder disable/enable
  drm/i915/sdvo: convert to encoder disable/enable
  drm/i915/dvo: convert to encoder disable/enable
  drm/i915: convert dpms functions of dvo/sdvo/crt
  drm/i915: rip out encoder->disable/enable checks
  drm/i915: clean up encoder_prepare/commit
  drm/i915: copy&paste drm_crtc_helper_set_config
  drm/i915: call set_base directly
  drm/i915: inline intel_best_encoder
  drm/i915: copy&paste drm_crtc_helper_set_mode
  drm/i915: simplify intel_crtc_prepare_encoders
  drm/i915: rip out encoder->prepare/commit
  drm/i915: call crtc functions directly
  drm/i915: WARN when trying to enabled an unused crtc
  drm/i915: Add interfaces to read out encoder/connector hw state
  drm/i915/dp: implement get_hw_state
  drm/i915/hdmi: implement get_hw_state
  drm/i915/tv: implement get_hw_state
  drm/i915/lvds: implement get_hw_state
  drm/i915/crt: implement get_hw_state
  drm/i915/sdvo: implement get_hw_state
  drm/i915/dvo: implement get_hw_state
  drm/i915: read out the modeset hw state at load and resume time
  drm/i915: check connector hw/sw state
  drm/i915: rip out intel_crtc->dpms_mode
  drm/i915: rip out intel_dp->dpms_mode
  drm/i915: ensure the force pipe A quirk is actually followed
  drm/i915: introduce struct intel_set_config
  drm/i915: extract modeset config save/restore code
  drm/i915: extract intel_set_config_compute_mode_changes
  drm/i915: extract intel_set_config_update_output_state
  drm/i915: implement crtc helper semantics relied upon by the fb
    helper
  drm/i915: don't update the fb base if there is no fb
  drm/i915: convert pointless error checks in set_config to BUGs
  drm/i915: don't save all the encoder/crtc state in set_config
  drm/i915: stage modeset output changes
  drm/i915: push crtc->fb update into pipe_set_base
  drm/i915: remove crtc disabling special case
  drm/i915: move output commit and crtc disabling into set_mode
  drm/i915: extract adjusted mode computation
  drm/i915: use staged outuput config in tv->mode_fixup
  drm/i915: use staged outuput config in lvds->mode_fixup
  drm/i915: compute masks of crtcs affected in set_mode
  drm/i915: implement new set_mode code flow
  drm/i915: push commit_output_state past crtc disabling
  drm/i915: s/intel_encoder_disable/intel_encoder_noop
  drm/i915: WARN if the pipe won't turn off
  drm/i915: switch the load detect code to the staged modeset config
  drm/i915: push commit_output_state past the crtc/encoder preparing
  drm/i915: disable all crtcs at suspend time
  drm/i915: add tons of modeset state checks
  drm/i915: rip out intel_disable_pch_ports
  drm/i915: don't disable fdi links harder in ilk_crtc_enable
  drm/i915: don't call dpms funcs after set_mode
  drm/i915: update dpms property in set_mode
  drm/i915: add encoder->pre_enable/post_disable
  drm/i915: clean up the cpu edp pll special case
  drm/i915: robustify edp_pll_on/off
  drm/i915: rip out dp port enabling cludges^Wchecks
  drm/i915: disable the cpu edp port after the cpu pipe
  drm/i915: move encoder->mode_set calls to crtc_mode_set

 drivers/gpu/drm/drm_fb_helper.c      |    6 -
 drivers/gpu/drm/i915/dvo.h           |   15 +-
 drivers/gpu/drm/i915/dvo_ch7017.c    |   21 +-
 drivers/gpu/drm/i915/dvo_ch7xxx.c    |   17 +-
 drivers/gpu/drm/i915/dvo_ivch.c      |   23 +-
 drivers/gpu/drm/i915/dvo_ns2501.c    |   36 +-
 drivers/gpu/drm/i915/dvo_sil164.c    |   20 +-
 drivers/gpu/drm/i915/dvo_tfp410.c    |   18 +-
 drivers/gpu/drm/i915/i915_dma.c      |   22 +-
 drivers/gpu/drm/i915/i915_drv.c      |    4 +
 drivers/gpu/drm/i915/i915_drv.h      |   17 +-
 drivers/gpu/drm/i915/i915_reg.h      |    2 +
 drivers/gpu/drm/i915/intel_crt.c     |  136 ++-
 drivers/gpu/drm/i915/intel_ddi.c     |   59 +-
 drivers/gpu/drm/i915/intel_display.c | 1552 +++++++++++++++++++++++++++-------
 drivers/gpu/drm/i915/intel_dp.c      |  206 +++--
 drivers/gpu/drm/i915/intel_drv.h     |   66 +-
 drivers/gpu/drm/i915/intel_dvo.c     |   98 ++-
 drivers/gpu/drm/i915/intel_hdmi.c    |  151 +++-
 drivers/gpu/drm/i915/intel_lvds.c    |   95 +--
 drivers/gpu/drm/i915/intel_overlay.c |   58 +-
 drivers/gpu/drm/i915/intel_sdvo.c    |  164 +++-
 drivers/gpu/drm/i915/intel_tv.c      |   61 +-
 23 files changed, 2111 insertions(+), 736 deletions(-)

-- 
1.7.10.4