[Intel-gfx] [PATCH 17/76] drm/i915/sdvo: convert to encoder disable/enable
Daniel Vetter
daniel.vetter at ffwll.ch
Thu Jul 26 20:48:42 CEST 2012
Similar to crt, this doesn't convert the dpms functions.
Also similar to crt, we don't switch of the display pipe
for the intermediate modes, only DPMS_OFF is truely off.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_sdvo.c | 58 +++++++++++++++++++++++++++++++++++--
1 file changed, 56 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index d881602..3c83324 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -1139,6 +1139,56 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
intel_sdvo_write_sdvox(intel_sdvo, sdvox);
}
+static void intel_disable_sdvo(struct intel_encoder *encoder)
+{
+ struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
+ struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+ u32 temp;
+
+ intel_sdvo_set_active_outputs(intel_sdvo, 0);
+ if (0)
+ intel_sdvo_set_encoder_power_state(intel_sdvo,
+ DRM_MODE_DPMS_OFF);
+
+ temp = I915_READ(intel_sdvo->sdvo_reg);
+ if ((temp & SDVO_ENABLE) != 0) {
+ intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
+ }
+}
+
+static void intel_enable_sdvo(struct intel_encoder *encoder)
+{
+ struct drm_device *dev = encoder->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
+ struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
+ u32 temp;
+ bool input1, input2;
+ int i;
+ u8 status;
+
+ temp = I915_READ(intel_sdvo->sdvo_reg);
+ if ((temp & SDVO_ENABLE) == 0)
+ intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
+ for (i = 0; i < 2; i++)
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+ status = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2);
+ /* Warn if the device reported failure to sync.
+ * A lot of SDVO devices fail to notify of sync, but it's
+ * a given it the status is a success, we succeeded.
+ */
+ if (status == SDVO_CMD_STATUS_SUCCESS && !input1) {
+ DRM_DEBUG_KMS("First %s output reported failure to "
+ "sync\n", SDVO_NAME(intel_sdvo));
+ }
+
+ if (0)
+ intel_sdvo_set_encoder_power_state(intel_sdvo,
+ DRM_MODE_DPMS_ON);
+ intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
+}
+
static void intel_sdvo_dpms(struct drm_encoder *encoder, int mode)
{
struct drm_device *dev = encoder->dev;
@@ -1844,9 +1894,10 @@ done:
static const struct drm_encoder_helper_funcs intel_sdvo_helper_funcs = {
.dpms = intel_sdvo_dpms,
.mode_fixup = intel_sdvo_mode_fixup,
- .prepare = intel_encoder_prepare,
+ .prepare = intel_encoder_noop,
.mode_set = intel_sdvo_mode_set,
- .commit = intel_encoder_commit,
+ .commit = intel_encoder_noop,
+ .disable = intel_encoder_disable
};
static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
@@ -2573,6 +2624,9 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs);
+ intel_encoder->disable = intel_disable_sdvo;
+ intel_encoder->enable = intel_enable_sdvo;
+
/* In default case sdvo lvds is false */
if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
goto err;
--
1.7.10.4
More information about the Intel-gfx
mailing list