[Intel-gfx] [PATCH 1/2] drm: call pci_disable_device on module onload

[Daniel Vetter]

On Fri, Jun 08, 2012 at 06:03:57PM +0200, Jakob Bornecrantz wrote:
> On Fri, Jun 8, 2012 at 4:52 PM, Daniel Vetter <daniel.vetter at ffwll.ch> wrote:
> > Otherwise we'll nicely leak this reference counter. Now thanks to the
> > awesome layering in the drm core, the enable call is done by the pci
> > boilerplate in drm_pci.c. But the disable can't be done without adding
> > yet another neat indirection layer just for that.
> >
> > So take the simple way and sprinkle pci_disable_device over all pci
> > modesetting drivers.
> >
> > Also don't forget these dear old legacy drivers, prinkle the
> > pci_disable_device call in drm_pci_exit to cover these, too.
> >
> > Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> 
> Looks good, one question inlined.
> 
> CC: Stable?

Hm, don't think, no one complained ;-) And we'll only hit this in
module-unload, which is full of much larger issues.

> > ---
> >  drivers/gpu/drm/ast/ast_drv.c         |    2 ++
> >  drivers/gpu/drm/cirrus/cirrus_drv.c   |    2 ++
> >  drivers/gpu/drm/drm_pci.c             |    4 +++-
> >  drivers/gpu/drm/gma500/psb_drv.c      |    3 +++
> >  drivers/gpu/drm/i915/i915_drv.c       |    2 ++
> >  drivers/gpu/drm/mgag200/mgag200_drv.c |    2 ++
> >  drivers/gpu/drm/nouveau/nouveau_drv.c |    2 ++
> >  drivers/gpu/drm/radeon/radeon_drv.c   |    2 ++
> >  drivers/gpu/drm/vmwgfx/vmwgfx_drv.c   |    2 ++
> >  9 files changed, 20 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c
> > index d0c4574..6d26e53 100644
> > --- a/drivers/gpu/drm/ast/ast_drv.c
> > +++ b/drivers/gpu/drm/ast/ast_drv.c
> > @@ -72,6 +72,8 @@ ast_pci_remove(struct pci_dev *pdev)
> >  {
> >        struct drm_device *dev = pci_get_drvdata(pdev);
> >
> > +       pci_disable_device(dev->pdev);
> > +
> >        drm_put_dev(dev);
> >  }
> >
> > diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.c b/drivers/gpu/drm/cirrus/cirrus_drv.c
> > index d703823..d316ba3 100644
> > --- a/drivers/gpu/drm/cirrus/cirrus_drv.c
> > +++ b/drivers/gpu/drm/cirrus/cirrus_drv.c
> > @@ -45,6 +45,8 @@ static void cirrus_pci_remove(struct pci_dev *pdev)
> >  {
> >        struct drm_device *dev = pci_get_drvdata(pdev);
> >
> > +       pci_disable_device(dev->pdev);
> > +
> >        drm_put_dev(dev);
> >  }
> >
> > diff --git a/drivers/gpu/drm/drm_pci.c b/drivers/gpu/drm/drm_pci.c
> > index 59e11e4..73218ac 100644
> > --- a/drivers/gpu/drm/drm_pci.c
> > +++ b/drivers/gpu/drm/drm_pci.c
> > @@ -455,8 +455,10 @@ void drm_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver)
> >        if (driver->driver_features & DRIVER_MODESET) {
> >                pci_unregister_driver(pdriver);
> >        } else {
> > -               list_for_each_entry_safe(dev, tmp, &driver->device_list, driver_item)
> > +               list_for_each_entry_safe(dev, tmp, &driver->device_list, driver_item) {
> > +                       pci_disable_device(dev->pdev);
> 
> I'm assuming that we take a ref in the enter func as well?

Yeah, it's a bit convoluted: Drivers call drm_pci_init which either
registers a real pci driver (for modeset) or does the shadow attach dance.
In either case we later on end up in drm_get_pci_dev which then call
pci_enable_device. Imo that kind of low-level hw frobbing shouldn't be
done by the drm code (for suspend/resume we've moved the pci
enable/disable device calls into drivers a long time ago), but that's
material for an entirely different patch series ;-)

Cheers, Daniel
-- 
Daniel Vetter
Mail: daniel at ffwll.ch
Mobile: +41 (0)79 365 57 48