[Intel-gfx] [PULL] first drm-intel-next for 3.6

[Daniel Vetter]

Hooray for yet again screwing up the recipient list!

/me sucks

-Daniel
----- Forwarded message from Daniel Vetter <daniel at ffwll.ch> -----

Date: Tue, 12 Jun 2012 10:37:51 +0200
From: Daniel Vetter <daniel at ffwll.ch>
To: Intel Graphics Development <intel-gfx at lists.freedesktop.org>, "Sun, Yi" <yi.sun at intel.com>
Subject: Re: Updated -next
Message-ID: <20120612083751.GA5188 at phenom.ffwll.local>

Hi Dave,

rc2 is out the door so I've figured I'll annoy you with the first -next
pull request for 3.6 already. Highlights:
- new wait_rendring_timeout interface (Ben)
- l3 cache remapping and error uevent support (Ben)
- even more infoframes work from Paulo
- gen4 hotplug rework from Chris
- prep work to make Laurent Pincharts original mode constification for
  connector->mode_fixup possible

QA reported a few new bugs this time around, but no regressions afact. For
3.5 the only thing I'm aware of is the edp vdd dmesg spam Linus originally
reported - it looks like that might have been introduced in 3.5. But
somehow my brain is routinely offline when I work on that issue, so things
seem to take forever (and atm I'm at patch v4 for that little problem).

Yours, Daniel


The following changes since commit 63bc620b45af8c743ac291c8725933278c712692:

  radeon: add radeon prime vmap support. (2012-05-31 14:14:01 +0100)

are available in the git repository at:

  git://people.freedesktop.org/~danvet/drm-intel tags/drm-intel-next-2012-06-04

for you to fetch changes up to 1523c310b3ed964b71a8db16f70c3bc21cc0642e:

  drm/i915: add min freq control to debugfs (2012-06-04 21:34:47 +0200)

----------------------------------------------------------------
Ben Widawsky (8):
      drm/i915: timeout parameter for seqno wait
      drm/i915: improve i915_wait_request_begin trace
      drm/i915: wait render timeout ioctl
      drm/i915: s/i915_wait_request/i915_wait_seqno/g
      drm/i915: Dynamic Parity Detection handling
      drm/i915: enable parity error interrupts
      drm/i915: remap l3 on hw init
      drm/i915: l3 parity sysfs interface

Chris Wilson (6):
      drm/i915: All members of gen4 have hotplug, so unconditionally enable its irq
      drm/i915: Inspect the right status bits for DP/HDMI hotplug on gen4
      drm/i915: SDVO hotplug have different interrupt status bits for i915/i965/g4x
      drm/i915/hdmi: Query the live connector status bit for G4x
      drm/i915/dp: For consistency use the DP hotplug synonyms
      drm/i915/hdmi: Fix reg values for g4x_hdmi_connected

Daniel Vetter (14):
      drm/i915: clarify preferred sdvo input mode code
      drm/i915: don't silently ignore sdvo mode_set failures
      drm/i915: there's no cxsr on ilk
      drm/i915: reuse the sdvo tv clock adjustment in ilk mode_set
      drm/i915: s/mdelay/msleep/ in the sdvo detect function
      drm/i915: ivybridge_handle_parity_error should be static
      drm/i915: initialize the parity work only once
      drm/i915: simplify sysfs setup code
      Merge remote-tracking branch 'airlied/drm-prime-vmap' into drm-intel-next-queued
      drm/i915: clarify IBX dp workaround
      drm/i915: extract object active state flushing code
      drm/i915: compute the target_clock for edp directly
      drm/i915: adjusted_mode->clock in the dp mode_fixup
      drm/i915: don't chnage the original mode in dp_mode_fixup

Jesse Barnes (1):
      drm/i915: add min freq control to debugfs

Paulo Zanoni (11):
      drm/i915: add set_infoframes to struct intel_hdmi
      drm/i915: properly alternate between DVI and HDMI
      drm/i915: only set the HDMI port on the DIP once
      drm/i915: enable DIP before enabling each InfoFrame
      drm/i915: don't wait for vblank while writing InfoFrames
      drm/i915: explicitly disable the DIPs we're not using
      drm/i915: disable DIP while changing the port
      drm/i915: don't write 0 to DIP control at HDMI init
      drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI
      drm/i915: remove comment about HSW HDMI DIPs
      drm/i915: add some barriers when changing DIPs

 drivers/gpu/drm/i915/i915_debugfs.c     |   66 +++++++
 drivers/gpu/drm/i915/i915_dma.c         |    1 +
 drivers/gpu/drm/i915/i915_drv.h         |   11 +-
 drivers/gpu/drm/i915/i915_gem.c         |  242 +++++++++++++++++++----
 drivers/gpu/drm/i915/i915_irq.c         |  171 ++++++++++++-----
 drivers/gpu/drm/i915/i915_reg.h         |   56 +++++-
 drivers/gpu/drm/i915/i915_sysfs.c       |  127 +++++++++++-
 drivers/gpu/drm/i915/i915_trace.h       |   28 ++-
 drivers/gpu/drm/i915/intel_ddi.c        |    3 +-
 drivers/gpu/drm/i915/intel_display.c    |   47 ++---
 drivers/gpu/drm/i915/intel_dp.c         |   53 +++---
 drivers/gpu/drm/i915/intel_drv.h        |    9 +-
 drivers/gpu/drm/i915/intel_hdmi.c       |  318 +++++++++++++++++++++++++------
 drivers/gpu/drm/i915/intel_overlay.c    |    4 +-
 drivers/gpu/drm/i915/intel_panel.c      |    2 +-
 drivers/gpu/drm/i915/intel_ringbuffer.c |   16 +-
 drivers/gpu/drm/i915/intel_sdvo.c       |   56 ++++--
 include/drm/i915_drm.h                  |   10 +
 18 files changed, 965 insertions(+), 255 deletions(-)
-- 
Daniel Vetter
Mail: daniel at ffwll.ch
Mobile: +41 (0)79 365 57 48

----- End forwarded message -----

-- 
Daniel Vetter
Mail: daniel at ffwll.ch
Mobile: +41 (0)79 365 57 48