[Intel-gfx] [Bug 51061] GPU Hang using VAAPI
Daniel Vetter
daniel at ffwll.ch
Wed Jun 20 20:08:32 CEST 2012
On Wed, Jun 20, 2012 at 07:34:29PM +0200, Angela wrote:
> > From: Daniel Vetter [mailto:daniel.vetter at ffwll.ch] On Behalf Of Daniel
> > Dunno which kernel the -extra one is built from, but there's a drm-intel-
> > experimental ppa at
> >
> > http://kernel.ubuntu.com/~kernel-ppa/mainline/drm-intel-experimental/
> >
> > which is built from the drm-intel-next-queued branch from
> >
> > http://cgit.freedesktop.org/~danvet/drm-intel
> >
> > That's pretty much the latest stuff. Note though that merging this into
> 3.5-rc
> > has 2 simple merge conflicts.
>
> Hello Daniel
>
> Updated xorg-edgers, updated kernel (>3.5-rc3), merged
> drm-intel-next-queued. "Fixed" the two conflicts, are they OK ?
>
> No console, X starts in Vesa Mode.
>
> Added the new kernel dmesg, my "fixed" conflict's and a good kernel dmesg.
>
> What's next.
Looks like the kernel couldn't communicate with the chip at all, all reads
just fail. I've pushed out a for-angela branch to my kernel playground at
http://cgit.freedesktop.org/~danvet/drm
Which contains recent drm-intel-next-queued with rc3 merged. That one
boots at least correctly here. Although your merge resolution looks
correct, so I have no idea what exactly went wrong.
-Daniel
>
> Angela
>
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc3-mine353+
> root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc3-mine353+
> root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
> [ 1.103072] [drm] Initialized drm 1.1.0 20060810
> [ 1.421330] [drm:intel_opregion_setup], graphic opregion physical addr:
> 0xbebbc018
> [ 1.421341] [drm:intel_opregion_setup], SWSCI supported
> [ 1.421360] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 1.421362] [drm] Driver supports precise vblank timestamp query.
> [ 1.421365] [drm:intel_detect_pch], Found CougarPoint PCH
> [ 1.421366] [drm:init_vbt_defaults], Set default to SSC at 100MHz
> [ 1.421368] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT
> SNB/IVB-DESKTOPd
> [ 1.421369] [drm:parse_general_features], BDB_GENERAL_FEATURES
> int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120
> display_clock_mode 0
> [ 1.421370] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
> [ 1.421373] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT
> tables:
> [ 1.421375] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0
> 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> [ 1.421376] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
> [ 1.421377] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS
> VBT tables:
> [ 1.421379] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0
> 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
> [ 1.421380] [drm:parse_sdvo_device_mapping], No SDVO device info is found
> in VBT
> [ 1.421385] [drm:intel_dsm_pci_probe], no _DSM method for intel device
> [ 1.421392] [drm:intel_modeset_init], 2 display pipes available.
> [ 1.421710] [drm:intel_lvds_init], LVDS is not present in VBT
> [ 1.421727] [drm:intel_crt_init], pch crt adpa set to 0xf40000
> [ 1.422087] [drm:intel_sdvo_read_byte], i2c transfer returned -6
> [ 1.422087] [drm:intel_sdvo_init], No SDVO device found on SDVOB
> [ 1.422128] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
> [ 1.424649] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
> [ 1.424650] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.427171] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
> [ 1.427172] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.427220] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
> [ 1.429741] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
> [ 1.429742] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.432266] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
> [ 1.432266] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.432295] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
> [ 1.434816] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
> [ 1.434817] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.437338] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003f
> [ 1.437339] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.437377] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
> [ 1.437379] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
> [ 1.484212] [drm:intel_update_fbc],
> [ 1.484215] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
> [ 1.484216] [drm:gm45_get_vblank_counter], trying to get vblank count for
> disabled pipe B
> [ 1.484217] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
> [ 1.484219] [drm:gm45_get_vblank_counter], trying to get vblank count for
> disabled pipe B
> [ 1.484657] [drm:intel_update_fbc],
> [ 1.484659] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0
> has_pch_edp 0 has_cpu_edp 0 has_ck505 0
> [ 1.484661] [drm:ironlake_init_pch_refclk], Disabling SSC entirely
> [ 1.507012] [drm:init_status_page], render ring hws offset: 0x00000000
> [ 1.559930] [drm:init_ring_common] *ERROR* render ring initialization
> failed ctl 00000000 head 00000000 tail 00000000 start 00000000
> [ 1.560018] [drm:init_status_page], bsd ring hws offset: 0x00022000
> [ 1.615897] [drm:init_ring_common] *ERROR* bsd ring initialization failed
> ctl 00000000 head 00000000 tail 00000000 start 00000000
> [ 1.616018] [drm:i915_driver_load] *ERROR* failed to init modeset
>
> vi drivers/gpu/drm/i915/intel_ringbuffer.c
> /*
> <<<<<<< HEAD
> */
> ret = i915_gem_object_set_to_gtt_domain(obj, true);
> if (ret)
> goto err_unpin;
>
> /*
> ring->virtual_start = ioremap_wc(dev->agp->base + obj->gtt_offset,
> ring->size);
> =======
> */
> ring->virtual_start =
> ioremap_wc(dev_priv->mm.gtt->gma_bus_addr + obj->gtt_offset,
> ring->size);
> /*
> >>>>>>> drm-intel/drm-intel-next-queued
> */
>
>
> vi drivers/gpu/drm/i915/i915_reg.h
> /*
> <<<<<<< HEAD
> IVB has funny definitions for which plane to flip.
> */
> #define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19)
> #define MI_DISPLAY_FLIP_IVB_PLANE_B (1 << 19)
> #define MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19)
> #define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19)
> #define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19)
> #define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19)
>
> /*
> =======
> */
> #define MI_ARB_ON_OFF MI_INSTR(0x08, 0)
> #define MI_ARB_ENABLE (1<<0)
> #define MI_ARB_DISABLE (0<<0)
> /*
> >>>>>>> drm-intel/drm-intel-next-queued
> */
>
>
>
>
> Good kernel:
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc2-mine5+
> root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
> [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5.0-rc2-mine5+
> root=UUID=8d6b1917-e239-43f0-a957-a5aa181e0255 ro drm.debug=0x06
> [ 1.103710] [drm] Initialized drm 1.1.0 20060810
> [ 1.388663] [drm:intel_opregion_setup], graphic opregion physical addr:
> 0xbebbc018
> [ 1.388674] [drm:intel_opregion_setup], SWSCI supported
> [ 1.388692] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 1.388694] [drm] Driver supports precise vblank timestamp query.
> [ 1.388697] [drm:intel_detect_pch], Found CougarPoint PCH
> [ 1.388699] [drm:init_vbt_defaults], Set default to SSC at 100MHz
> [ 1.388701] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT
> SNB/IVB-DESKTOPd
> [ 1.388702] [drm:parse_general_features], BDB_GENERAL_FEATURES
> int_tv_support 0 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 120
> display_clock_mode 0
> [ 1.388703] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
> [ 1.388705] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT
> tables:
> [ 1.388707] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0
> 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
> [ 1.388708] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
> [ 1.388710] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS
> VBT tables:
> [ 1.388711] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0
> 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
> [ 1.388712] [drm:parse_sdvo_device_mapping], No SDVO device info is found
> in VBT
> [ 1.388725] [drm:intel_dsm_pci_probe], no _DSM method for intel device
> [ 1.388731] [drm:intel_modeset_init], 2 display pipes available.
> [ 1.389042] [drm:intel_lvds_init], LVDS is not present in VBT
> [ 1.389059] [drm:intel_crt_init], pch crt adpa set to 0xf40000
> [ 1.389416] [drm:intel_sdvo_read_byte], i2c transfer returned -6
> [ 1.389417] [drm:intel_sdvo_init], No SDVO device found on SDVOB
> [ 1.389461] [drm:intel_dp_i2c_init], i2c_init DPDDC-B
> [ 1.391987] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.391988] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.394509] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.394509] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.394559] [drm:intel_dp_i2c_init], i2c_init DPDDC-C
> [ 1.397079] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.397080] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.399599] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.399600] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.399628] [drm:intel_dp_i2c_init], i2c_init DPDDC-D
> [ 1.402148] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.402149] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.404670] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.404671] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110
> [ 1.404710] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off
> [ 1.404712] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
> [ 1.468208] [drm:intel_update_fbc],
> [ 1.468210] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off
> [ 1.468212] [drm:gm45_get_vblank_counter], trying to get vblank count for
> disabled pipe B
> [ 1.468213] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
> [ 1.468215] [drm:gm45_get_vblank_counter], trying to get vblank count for
> disabled pipe B
> [ 1.468653] [drm:intel_update_fbc],
> [ 1.468655] [drm:ironlake_init_pch_refclk], has_panel 0 has_lvds 0
> has_pch_edp 0 has_cpu_edp 0 has_ck505 0
> [ 1.468657] [drm:ironlake_init_pch_refclk], Disabling SSC entirely
> [ 1.490812] [drm:init_status_page], render ring hws offset: 0x00000000
> [ 1.491057] [drm:init_status_page], bsd ring hws offset: 0x00022000
> [ 1.491164] [drm:init_status_page], blitter ring hws offset: 0x00043000
> [ 1.491307] [drm:intel_enable_rc6], Sandybridge: deep RC6 disabled
> [ 1.491308] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
> [ 1.583993] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:7:VGA-1]
> [ 1.583998] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug
> detect cycle: adpa=0xf40000
> [ 1.599925] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug
> adpa=0xf40000, result 0
> [ 1.599936] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 1.599939] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:7:VGA-1] disconnected
> [ 1.599943] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:10:HDMI-A-1]
> [ 1.600326] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
> adapter i915 gmbus dpb
> [ 1.600327] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:10:HDMI-A-1] disconnected
> [ 1.600328] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:13:DP-1]
> [ 1.602847] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.610431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.618431] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 1.623908] [drm:intel_dp_detect], DPCD: 0000000000000000
> [ 1.623913] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:13:DP-1] disconnected
> [ 1.623916] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:16:HDMI-A-2]
> [ 1.631904] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050
> r(1)
> [ 1.631908] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
> adapter i915 gmbus dpc
> [ 1.631912] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:16:HDMI-A-2] disconnected
> [ 1.631915] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:18:HDMI-A-3]
> [ 1.919718] [drm:drm_detect_monitor_audio], Monitor has basic audio
> support
> [ 2.207550] [drm:drm_edid_to_eld], ELD monitor Philips FTV
> [ 2.207562] [drm:drm_edid_to_eld], ELD size 10, SAD count 3
> [ 2.207584] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:18:HDMI-A-3] probed modes :
> [ 2.207588] [drm:drm_mode_debug_printmodeline], Modeline 53:"1920x1080"
> 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
> [ 2.207592] [drm:drm_mode_debug_printmodeline], Modeline 48:"1920x1080"
> 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
> [ 2.207596] [drm:drm_mode_debug_printmodeline], Modeline 44:"1366x768" 60
> 85885 1366 1439 1583 1800 768 769 772 795 0x0 0x6
> [ 2.207599] [drm:drm_mode_debug_printmodeline], Modeline 42:"1360x768" 60
> 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
> [ 2.207603] [drm:drm_mode_debug_printmodeline], Modeline 41:"1280x800" 60
> 83500 1280 1352 1480 1680 800 803 809 831 0x40 0x9
> [ 2.207614] [drm:drm_mode_debug_printmodeline], Modeline 40:"1280x800" 60
> 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
> [ 2.207615] [drm:drm_mode_debug_printmodeline], Modeline 39:"1280x768" 60
> 79500 1280 1344 1472 1664 768 771 778 798 0x40 0x6
> [ 2.207617] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x768" 60
> 68250 1280 1328 1360 1440 768 771 778 790 0x40 0x9
> [ 2.207618] [drm:drm_mode_debug_printmodeline], Modeline 52:"1280x720" 50
> 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
> [ 2.207620] [drm:drm_mode_debug_printmodeline], Modeline 47:"1280x720" 60
> 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
> [ 2.207621] [drm:drm_mode_debug_printmodeline], Modeline 55:"1440x576" 50
> 27000 1440 1464 1590 1728 576 580 586 625 0x40 0x101a
> [ 2.207623] [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 60
> 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
> [ 2.207624] [drm:drm_mode_debug_printmodeline], Modeline 50:"1440x480" 60
> 27000 1440 1478 1602 1716 480 488 494 525 0x40 0x101a
> [ 2.207626] [drm:drm_mode_debug_printmodeline], Modeline 43:"1024x576" 60
> 46970 1024 1064 1168 1312 576 577 580 597 0x0 0x6
> [ 2.207627] [drm:drm_mode_debug_printmodeline], Modeline 35:"800x600" 60
> 40000 800 840 968 1056 600 601 605 628 0x40 0x5
> [ 2.207629] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 56
> 36000 800 824 896 1024 600 601 603 625 0x40 0x5
> [ 2.207630] [drm:drm_mode_debug_printmodeline], Modeline 51:"720x576" 50
> 27000 720 732 796 864 576 581 586 625 0x40 0xa
> [ 2.207632] [drm:drm_mode_debug_printmodeline], Modeline 36:"848x480" 60
> 33750 848 864 976 1088 480 486 494 517 0x40 0x5
> [ 2.207633] [drm:drm_mode_debug_printmodeline], Modeline 46:"720x480" 60
> 27000 720 736 798 858 480 489 495 525 0x40 0xa
> [ 2.207635] [drm:drm_mode_debug_printmodeline], Modeline 31:"640x480" 60
> 25200 640 656 752 800 480 490 492 525 0x40 0xa
> [ 2.207636] [drm:drm_mode_debug_printmodeline], Modeline 45:"640x480" 60
> 25175 640 656 752 800 480 490 492 525 0x40 0xa
> [ 2.207638] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 60
> 25175 640 656 752 800 480 489 492 525 0x40 0xa
> [ 2.207639] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:19:DP-2]
> [ 2.210168] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 2.218036] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 2.226031] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 2.231504] [drm:intel_dp_detect], DPCD: 0000000000000000
> [ 2.231509] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:19:DP-2] disconnected
> [ 2.231512] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:21:DP-3]
> [ 2.234036] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 2.242018] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 2.250014] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 2.255490] [drm:intel_dp_detect], DPCD: 0000000000000000
> [ 2.255494] [drm:drm_helper_probe_single_connector_modes],
> [CONNECTOR:21:DP-3] disconnected
> [ 2.255497] [drm:drm_setup_crtcs],
> [ 2.255500] [drm:drm_enable_connectors], connector 7 enabled? no
> [ 2.255502] [drm:drm_enable_connectors], connector 10 enabled? no
> [ 2.255504] [drm:drm_enable_connectors], connector 13 enabled? no
> [ 2.255506] [drm:drm_enable_connectors], connector 16 enabled? no
> [ 2.255508] [drm:drm_enable_connectors], connector 18 enabled? yes
> [ 2.255511] [drm:drm_enable_connectors], connector 19 enabled? no
> [ 2.255513] [drm:drm_enable_connectors], connector 21 enabled? no
> [ 2.255515] [drm:drm_target_preferred], looking for cmdline mode on
> connector 18
> [ 2.255517] [drm:drm_target_preferred], looking for preferred mode on
> connector 18
> [ 2.255519] [drm:drm_target_preferred], found mode 1920x1080
> [ 2.255521] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
> [ 2.255525] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 3
> [ 2.261081] [drm:intelfb_create], allocated 1920x1080 fb: 0x00064000, bo
> ffff88020fdb2a00
> [ 2.261187] fbcon: inteldrmfb (fb0) is primary device
> [ 2.261219] [drm:drm_crtc_helper_set_config],
> [ 2.261220] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
> #connectors=1 (x y) (0 0)
> [ 2.261225] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode
> set
> [ 2.261225] [drm:drm_crtc_helper_set_config], modes are different, full
> mode set
> [ 2.261227] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0
> 0 0 0 0 0x0 0x0
> [ 2.261228] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080"
> 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
> [ 2.261229] [drm:drm_crtc_helper_set_config], encoder changed, full mode
> switch
> [ 2.261229] [drm:drm_crtc_helper_set_config], crtc changed, full mode
> switch
> [ 2.261230] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
> [CRTC:3]
> [ 2.261231] [drm:drm_crtc_helper_set_config], attempting to set mode from
> userspace
> [ 2.261232] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080"
> 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
> [ 2.261234] [drm:drm_crtc_helper_set_mode], [CRTC:3]
> [ 2.261276] [drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI
> [ 2.261277] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8
> (max display bpc 8)
> [ 2.261278] [drm:ironlake_crtc_mode_set], Mode for pipe 0:
> [ 2.261279] [drm:drm_mode_debug_printmodeline], Modeline 24:"1920x1080"
> 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x48 0x15
> [ 2.261280] [drm:intel_get_pch_pll], CRTC:3 allocated PCH PLL c6014
> [ 2.261280] [drm:intel_get_pch_pll], using pll 0 for pipe 0
> [ 2.261281] [drm:intel_get_pch_pll], switching PLL c6014 off
> [ 2.315421] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 2.315426] [drm:ironlake_update_plane], Writing base 00064000 00000000 0
> 0 7680
> [ 2.315428] [drm:intel_update_fbc],
> [ 2.315431] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -
> plane 6, cursor: 6
> [ 2.315433] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc
> lines 3, cursor 6
> [ 2.315435] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc
> lines 3, cursor 6
> [ 2.315437] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc
> lines 3, cursor 6
> [ 2.315441] [drm:drm_crtc_helper_set_mode], [ENCODER:17:TMDS-17] set
> [MODE:24:1920x1080]
> [ 2.315442] [drm:intel_hdmi_mode_set], Enabling HDMI audio on pipe A
> [ 2.315445] [drm:intel_write_eld], ELD on [CONNECTOR:18:HDMI-A-3],
> [ENCODER:17:TMDS-17]
> [ 2.315447] [drm:ironlake_write_eld], ELD on pipe A
> [ 2.315449] [drm:ironlake_write_eld], Audio directed to unknown port
> [ 2.315458] [drm:ironlake_write_eld], ELD size 10
> [ 2.371409] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 2.427378] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 2.427387] [drm:sandybridge_update_wm], FIFO watermarks For pipe A -
> plane 6, cursor: 6
> [ 2.427389] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc
> lines 3, cursor 6
> [ 2.427391] [drm:ironlake_check_srwm], watermark 2: display plane 12, fbc
> lines 3, cursor 6
> [ 2.427393] [drm:ironlake_check_srwm], watermark 3: display plane 54, fbc
> lines 3, cursor 6
> [ 2.483340] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 2.539305] [drm:ironlake_wait_for_vblank], vblank wait timed out
> [ 2.540109] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700
> [ 2.540111] [drm:gen6_fdi_link_train], FDI train 1 done.
> [ 2.540759] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600
> [ 2.540760] [drm:gen6_fdi_link_train], FDI train 2 done.
> [ 2.540761] [drm:gen6_fdi_link_train], FDI train done.
> [ 2.540762] [drm:intel_enable_pch_pll], enable PCH PLL c6014 (active 0,
> on? 0)for crtc 3
> [ 2.540763] [drm:intel_enable_pch_pll], enabling PCH PLL c6014
> [ 2.541969] [drm:intel_update_fbc],
> [ 2.542471] [drm:drm_crtc_helper_set_config], Setting connector DPMS
> state to on
> [ 2.542472] [drm:drm_crtc_helper_set_config],
> [CONNECTOR:18:HDMI-A-3] set DPMS on
> [ 2.542488] [drm:drm_crtc_helper_set_config],
> [ 2.542488] [drm:drm_crtc_helper_set_config], [CRTC:5] [NOFB]
> [ 2.542508] [drm:drm_crtc_helper_set_config],
> [ 2.542509] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
> #connectors=1 (x y) (0 0)
> [ 2.542512] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
> [CRTC:3]
> [ 2.545365] fb0: inteldrmfb frame buffer device
> [ 2.545365] drm: registered panic notifier
> [ 2.546081] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
> minor 0
> [ 2.562044] [drm:intel_prepare_page_flip], preparing flip with no unpin
> work?
> [ 3.443806] [drm:drm_crtc_helper_set_config],
> [ 3.443807] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
> #connectors=1 (x y) (0 0)
> [ 3.443812] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
> [CRTC:3]
> [ 3.495686] [drm:drm_crtc_helper_set_config],
> [ 3.495687] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
> #connectors=1 (x y) (0 0)
> [ 3.495691] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
> [CRTC:3]
> [ 12.560879] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug
> adpa=0xf40000, result 0
> [ 12.560883] [drm:intel_crt_detect], CRT not detected via hotplug
> [ 12.560887] [drm:output_poll_execute], [CONNECTOR:7:VGA-1] status updated
> from 2 to 2
> [ 12.561235] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
> adapter i915 gmbus dpb
> [ 12.561237] [drm:output_poll_execute], [CONNECTOR:10:HDMI-A-1] status
> updated from 2 to 2
> [ 12.563758] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.571405] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.579400] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.584877] [drm:intel_dp_detect], DPCD: 0000000000000000
> [ 12.584882] [drm:output_poll_execute], [CONNECTOR:13:DP-1] status updated
> from 2 to 2
> [ 12.592875] [drm:gmbus_xfer], GMBUS [i915 gmbus dpc] NAK for addr: 0050
> r(1)
> [ 12.592879] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent
> adapter i915 gmbus dpc
> [ 12.592883] [drm:output_poll_execute], [CONNECTOR:16:HDMI-A-2] status
> updated from 2 to 2
> [ 12.880697] [drm:drm_detect_monitor_audio], Monitor has basic audio
> support
> [ 12.880702] [drm:output_poll_execute], [CONNECTOR:18:HDMI-A-3] status
> updated from 1 to 1
> [ 12.883224] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.891206] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.899200] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.904676] [drm:intel_dp_detect], DPCD: 0000000000000000
> [ 12.904681] [drm:output_poll_execute], [CONNECTOR:19:DP-2] status updated
> from 2 to 2
> [ 12.907204] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.915190] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.923185] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5145003f
> [ 12.928662] [drm:intel_dp_detect], DPCD: 0000000000000000
> [ 12.928667] [drm:output_poll_execute], [CONNECTOR:21:DP-3] status updated
> from 2 to 2
> [ 47.693915] [drm:drm_crtc_helper_set_config],
> [ 47.693917] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:25]
> #connectors=1 (x y) (0 0)
> [ 47.693925] [drm:drm_crtc_helper_set_config], [CONNECTOR:18:HDMI-A-3] to
> [CRTC:3]
>
>
--
Daniel Vetter
Mail: daniel at ffwll.ch
Mobile: +41 (0)79 365 57 48
More information about the Intel-gfx
mailing list