[Intel-gfx] [PATCH 2/5] drm/i915: make enable/disable_gt_powersave locking consistent
Daniel Vetter
daniel.vetter at ffwll.ch
Sun Jun 24 16:42:33 CEST 2012
The enable functions grabbed dev->struct_mutex themselves, whereas
the disable functions expected dev->struct_mutex to be held by the
caller. Move the locking out to the (currently only) callsite of
intel_enable_gt_powersave to make this more consistent.
Originally this was prep work for future patches, but I've chased down
a totally wrong alley. Still, I think this is a sensible
clarification.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_display.c | 2 ++
drivers/gpu/drm/i915/intel_pm.c | 32 +++++++++++++-------------------
2 files changed, 15 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index fdca5b9..3fbc802 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -7174,7 +7174,9 @@ void intel_modeset_init_hw(struct drm_device *dev)
{
intel_init_clock_gating(dev);
+ mutex_lock(&dev->struct_mutex);
intel_enable_gt_powersave(dev);
+ mutex_unlock(&dev->struct_mutex);
if (IS_IVYBRIDGE(dev))
ivb_pch_pwm_override(dev);
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 2baba10..99bc1f3 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2349,8 +2349,9 @@ int intel_enable_rc6(const struct drm_device *dev)
return (INTEL_RC6_ENABLE | INTEL_RC6p_ENABLE);
}
-static void gen6_enable_rps(struct drm_i915_private *dev_priv)
+static void gen6_enable_rps(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_ring_buffer *ring;
u32 rp_state_cap;
u32 gt_perf_status;
@@ -2359,6 +2360,8 @@ static void gen6_enable_rps(struct drm_i915_private *dev_priv)
int rc6_mode;
int i;
+ WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
/* Here begins a magic sequence of register writes to enable
* auto-downclocking.
*
@@ -2366,7 +2369,6 @@ static void gen6_enable_rps(struct drm_i915_private *dev_priv)
* userspace...
*/
I915_WRITE(GEN6_RC_STATE, 0);
- mutex_lock(&dev_priv->dev->struct_mutex);
/* Clear the DBG now so we don't confuse earlier errors */
if ((gtfifodbg = I915_READ(GTFIFODBG))) {
@@ -2491,15 +2493,17 @@ static void gen6_enable_rps(struct drm_i915_private *dev_priv)
I915_WRITE(GEN6_PMINTRMSK, 0);
gen6_gt_force_wake_put(dev_priv);
- mutex_unlock(&dev_priv->dev->struct_mutex);
}
-static void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
+static void gen6_update_ring_freq(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
int min_freq = 15;
int gpu_freq, ia_freq, max_ia_freq;
int scaling_factor = 180;
+ WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
max_ia_freq = cpufreq_quick_get_max(0);
/*
* Default to measured freq if none found, PCU will ensure we don't go
@@ -2511,8 +2515,6 @@ static void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
/* Convert from kHz to MHz */
max_ia_freq /= 1000;
- mutex_lock(&dev_priv->dev->struct_mutex);
-
/*
* For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency
@@ -2543,8 +2545,6 @@ static void gen6_update_ring_freq(struct drm_i915_private *dev_priv)
continue;
}
}
-
- mutex_unlock(&dev_priv->dev->struct_mutex);
}
static void ironlake_teardown_rc6(struct drm_device *dev)
@@ -2615,12 +2615,11 @@ void ironlake_enable_rc6(struct drm_device *dev)
if (!intel_enable_rc6(dev))
return;
- mutex_lock(&dev->struct_mutex);
+ WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
ret = ironlake_setup_rc6(dev);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
+ if (ret)
return;
- }
/*
* GPU can automatically power down the render unit if given a page
@@ -2629,7 +2628,6 @@ void ironlake_enable_rc6(struct drm_device *dev)
ret = intel_ring_begin(ring, 6);
if (ret) {
ironlake_teardown_rc6(dev);
- mutex_unlock(&dev->struct_mutex);
return;
}
@@ -2654,13 +2652,11 @@ void ironlake_enable_rc6(struct drm_device *dev)
if (ret) {
DRM_ERROR("failed to enable ironlake power power savings\n");
ironlake_teardown_rc6(dev);
- mutex_unlock(&dev->struct_mutex);
return;
}
I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN);
I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT);
- mutex_unlock(&dev->struct_mutex);
}
static unsigned long intel_pxfreq(u32 vidfreq)
@@ -3237,8 +3233,6 @@ void intel_disable_gt_powersave(struct drm_device *dev)
void intel_enable_gt_powersave(struct drm_device *dev)
{
- struct drm_i915_private *dev_priv = dev->dev_private;
-
if (IS_IRONLAKE_M(dev)) {
ironlake_enable_drps(dev);
ironlake_enable_rc6(dev);
@@ -3246,8 +3240,8 @@ void intel_enable_gt_powersave(struct drm_device *dev)
}
if ((IS_GEN6(dev) || IS_GEN7(dev)) && !IS_VALLEYVIEW(dev)) {
- gen6_enable_rps(dev_priv);
- gen6_update_ring_freq(dev_priv);
+ gen6_enable_rps(dev);
+ gen6_update_ring_freq(dev);
}
}
--
1.7.10
More information about the Intel-gfx
mailing list