[Intel-gfx] [PATCH 4/9] drm/i915: add RPS configuration for Haswell
Eugeni Dodonov
eugeni.dodonov at intel.com
Fri Jun 29 20:47:58 CEST 2012
Split Haswell-specific GT algorithms into its own function.
Note that Haswell only has RC6, so account for that as well.
v2: reuse gen6 routines to simplify the code flow.
v2.1.: actually use proper RP controls for HSW.
v2.2: experiments have shown that GEN6_RP_MEDIA_HW_NORMAL_MODE works
better indeed, so use it on Haswell as well.
v3: further simplify the rps sequence for Haswell.
Signed-off-by: Eugeni Dodonov <eugeni.dodonov at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_pm.c | 77 ++++++++++++++++++++++++++---------------
2 files changed, 51 insertions(+), 27 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f17de3d..9d5bf06 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4156,6 +4156,7 @@
#define GEN6_RP_UP_IDLE_MIN (0x1<<3)
#define GEN6_RP_UP_BUSY_AVG (0x2<<3)
#define GEN6_RP_UP_BUSY_CONT (0x4<<3)
+#define GEN7_RP_DOWN_IDLE_AVG (0x2<<0)
#define GEN6_RP_DOWN_IDLE_CONT (0x1<<0)
#define GEN6_RP_UP_THRESHOLD 0xA02C
#define GEN6_RP_DOWN_THRESHOLD 0xA030
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 29720d2..40837d8 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -2332,9 +2332,10 @@ int intel_enable_rc6(const struct drm_device *dev)
if (INTEL_INFO(dev)->gen == 5)
return 0;
- /* Sorry Haswell, no RC6 for you for now. */
+ /* Haswell does not has RC6p nor RC6pp
+ */
if (IS_HASWELL(dev))
- return 0;
+ return INTEL_RC6_ENABLE;
/*
* Disable rc6 on Sandybridge
@@ -2355,6 +2356,7 @@ static void gen6_enable_rps(struct drm_device *dev)
u32 gt_perf_status;
u32 pcu_mbox, rc6_mask = 0;
u32 gtfifodbg;
+ u32 rp_control_regs;
int rc6_mode;
int i;
@@ -2389,33 +2391,40 @@ static void gen6_enable_rps(struct drm_device *dev)
I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16);
I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30);
- I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000);
I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25);
for_each_ring(ring, dev_priv, i)
I915_WRITE(RING_MAX_IDLE(ring->mmio_base), 10);
+ /* Check if we are enabling RC6 */
+ rc6_mode = intel_enable_rc6(dev_priv->dev);
+
+ if (rc6_mode & INTEL_RC6_ENABLE)
+ rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
+
+ /* Write RC6 thresholds for RC1e and RC6 states */
I915_WRITE(GEN6_RC_SLEEP, 0);
I915_WRITE(GEN6_RC1e_THRESHOLD, 1000);
I915_WRITE(GEN6_RC6_THRESHOLD, 50000);
- I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
- I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
- rc6_mode = intel_enable_rc6(dev_priv->dev);
- if (rc6_mode & INTEL_RC6_ENABLE)
- rc6_mask |= GEN6_RC_CTL_RC6_ENABLE;
+ /* We don't use those on Haswell */
+ if (!IS_HASWELL(dev)) {
+ I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30);
+ I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
+ I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
- if (rc6_mode & INTEL_RC6p_ENABLE)
- rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
+ if (rc6_mode & INTEL_RC6p_ENABLE)
+ rc6_mask |= GEN6_RC_CTL_RC6p_ENABLE;
- if (rc6_mode & INTEL_RC6pp_ENABLE)
- rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
+ if (rc6_mode & INTEL_RC6pp_ENABLE)
+ rc6_mask |= GEN6_RC_CTL_RC6pp_ENABLE;
+ }
DRM_INFO("Enabling RC6 states: RC6 %s, RC6p %s, RC6pp %s\n",
- (rc6_mode & INTEL_RC6_ENABLE) ? "on" : "off",
- (rc6_mode & INTEL_RC6p_ENABLE) ? "on" : "off",
- (rc6_mode & INTEL_RC6pp_ENABLE) ? "on" : "off");
+ (rc6_mask & GEN6_RC_CTL_RC6_ENABLE) ? "on" : "off",
+ (rc6_mask & GEN6_RC_CTL_RC6p_ENABLE) ? "on" : "off",
+ (rc6_mask & GEN6_RC_CTL_RC6pp_ENABLE) ? "on" : "off");
I915_WRITE(GEN6_RC_CONTROL,
rc6_mask |
@@ -2433,18 +2442,34 @@ static void gen6_enable_rps(struct drm_device *dev)
I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
dev_priv->max_delay << 24 |
dev_priv->min_delay << 16);
- I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
- I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
- I915_WRITE(GEN6_RP_UP_EI, 100000);
- I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
+
+ if (IS_HASWELL(dev)) {
+ I915_WRITE(GEN6_RP_UP_THRESHOLD, 59400);
+ I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 245000);
+ I915_WRITE(GEN6_RP_UP_EI, 66000);
+ I915_WRITE(GEN6_RP_DOWN_EI, 350000);
+ } else {
+ I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
+ I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
+ I915_WRITE(GEN6_RP_UP_EI, 100000);
+ I915_WRITE(GEN6_RP_DOWN_EI, 5000000);
+ }
+
I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
- I915_WRITE(GEN6_RP_CONTROL,
- GEN6_RP_MEDIA_TURBO |
+
+ rp_control_regs = GEN6_RP_MEDIA_TURBO |
GEN6_RP_MEDIA_HW_NORMAL_MODE |
GEN6_RP_MEDIA_IS_GFX |
GEN6_RP_ENABLE |
- GEN6_RP_UP_BUSY_AVG |
- GEN6_RP_DOWN_IDLE_CONT);
+ GEN6_RP_UP_BUSY_AVG;
+
+ /* We have a bit different default configuration for HSW */
+ if (IS_HASWELL(dev))
+ rp_control_regs |= GEN7_RP_DOWN_IDLE_AVG;
+ else
+ rp_control_regs |= GEN6_RP_DOWN_IDLE_CONT;
+
+ I915_WRITE(GEN6_RP_CONTROL, rp_control_regs);
if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
500))
@@ -3225,7 +3250,7 @@ void intel_disable_gt_powersave(struct drm_device *dev)
{
if (IS_IRONLAKE_M(dev))
ironlake_disable_drps(dev);
- if (INTEL_INFO(dev)->gen >= 6 && !IS_VALLEYVIEW(dev))
+ else if (INTEL_INFO(dev)->gen >= 6 && !IS_VALLEYVIEW(dev))
gen6_disable_rps(dev);
}
@@ -3235,9 +3260,7 @@ void intel_enable_gt_powersave(struct drm_device *dev)
ironlake_enable_drps(dev);
ironlake_enable_rc6(dev);
intel_init_emon(dev);
- }
-
- if ((IS_GEN6(dev) || IS_GEN7(dev)) && !IS_VALLEYVIEW(dev)) {
+ } else if ((IS_GEN6(dev) || IS_GEN7(dev)) && !IS_VALLEYVIEW(dev)) {
gen6_enable_rps(dev);
gen6_update_ring_freq(dev);
}
--
1.7.11.1
More information about the Intel-gfx
mailing list