[Intel-gfx] [PATCH 09/14] drm/i915: disable the infoframe before changing it

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni at intel.com>

That's what the VIDEO_DIP_CTL documentation says we need to do. Except
when it's the AVI InfoFrame and we're ironlake_write_infoframe.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov at intel.com>
---
 drivers/gpu/drm/i915/intel_hdmi.c |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 57ab62f..6e1086d 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -167,6 +167,7 @@ static void i9xx_write_infoframe(struct drm_encoder *encoder,
 	val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
 	val |= intel_infoframe_index(frame);
 
+	val &= ~intel_infoframe_enable(frame);
 	val |= VIDEO_DIP_ENABLE;
 
 	I915_WRITE(VIDEO_DIP_CTL, val);
@@ -199,6 +200,13 @@ static void ironlake_write_infoframe(struct drm_encoder *encoder,
 	val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
 	val |= intel_infoframe_index(frame);
 
+	/* The DIP control register spec says that we need to update the AVI
+	 * infoframe without clearing its enable bit */
+	if (frame->type == DIP_TYPE_AVI)
+		val |= VIDEO_DIP_ENABLE_AVI;
+	else
+		val &= ~intel_infoframe_enable(frame);
+
 	val |= VIDEO_DIP_ENABLE;
 
 	I915_WRITE(reg, val);
@@ -231,6 +239,7 @@ static void vlv_write_infoframe(struct drm_encoder *encoder,
 	val &= ~(VIDEO_DIP_SELECT_MASK | 0xf); /* clear DIP data offset */
 	val |= intel_infoframe_index(frame);
 
+	val &= ~intel_infoframe_enable(frame);
 	val |= VIDEO_DIP_ENABLE;
 
 	I915_WRITE(reg, val);
-- 
1.7.10