[Intel-gfx] [PATCH 2/2] drm/i915: implement hsw_write_infoframe

Paulo Zanoni przanoni at gmail.com
Mon May 14 22:12:51 CEST 2012


From: Paulo Zanoni <paulo.r.zanoni at intel.com>

Both the control and data registers are completely different now.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h   |    4 +++
 drivers/gpu/drm/i915/intel_hdmi.c |   53 +++++++++++++++++++++++++++++++++----
 2 files changed, 52 insertions(+), 5 deletions(-)

V2: swap patches 1 and 2

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index eae9495..5024551 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1703,6 +1703,7 @@
 /* Video Data Island Packet control */
 #define VIDEO_DIP_DATA		0x61178
 #define VIDEO_DIP_CTL		0x61170
+/* Pre HSW: */
 #define   VIDEO_DIP_ENABLE		(1 << 31)
 #define   VIDEO_DIP_PORT_B		(1 << 29)
 #define   VIDEO_DIP_PORT_C		(2 << 29)
@@ -1719,6 +1720,9 @@
 #define   VIDEO_DIP_FREQ_VSYNC		(1 << 16)
 #define   VIDEO_DIP_FREQ_2VSYNC		(2 << 16)
 #define   VIDEO_DIP_FREQ_MASK		(3 << 16)
+/* HSW and later: */
+#define   VIDEO_DIP_ENABLE_AVI_HSW	(1 << 12)
+#define   VIDEO_DIP_ENABLE_SPD_HSW	(1 << 0)
 
 /* Panel power sequencing */
 #define PP_STATUS	0x61200
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index cd5d9a9..2ead3bf 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -89,6 +89,32 @@ static u32 g4x_infoframe_enable(struct dip_infoframe *frame)
 	}
 }
 
+static u32 hsw_infoframe_enable(struct dip_infoframe *frame)
+{
+	switch (frame->type) {
+	case DIP_TYPE_AVI:
+		return VIDEO_DIP_ENABLE_AVI_HSW;
+	case DIP_TYPE_SPD:
+		return VIDEO_DIP_ENABLE_SPD_HSW;
+	default:
+		DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
+		return 0;
+	}
+}
+
+static u32 hsw_infoframe_data_reg(struct dip_infoframe *frame, enum pipe pipe)
+{
+	switch (frame->type) {
+	case DIP_TYPE_AVI:
+		return HSW_TVIDEO_DIP_AVI_DATA(pipe);
+	case DIP_TYPE_SPD:
+		return HSW_TVIDEO_DIP_SPD_DATA(pipe);
+	default:
+		DRM_DEBUG_DRIVER("unknown info frame type %d\n", frame->type);
+		return 0;
+	}
+}
+
 static void g4x_write_infoframe(struct drm_encoder *encoder,
 				struct dip_infoframe *frame)
 {
@@ -251,13 +277,30 @@ static void vlv_write_infoframe(struct drm_encoder *encoder,
 static void hsw_write_infoframe(struct drm_encoder *encoder,
 				struct dip_infoframe *frame)
 {
-	/* Not implemented yet, so avoid doing anything at all.
-	 * This is the placeholder for Paulo Zanoni's infoframe writing patch
-	 */
-	DRM_DEBUG_DRIVER("Attempting to write infoframe on Haswell, this is not implemented yet.\n");
+	uint32_t *data = (uint32_t *)frame;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
+	u32 ctl_reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
+	u32 data_reg = hsw_infoframe_data_reg(frame, intel_crtc->pipe);
+	unsigned int i, len = DIP_HEADER_SIZE + frame->len;
+	u32 val = I915_READ(ctl_reg);
 
-	return;
+	if (data_reg == 0)
+		return;
+
+	intel_wait_for_vblank(dev, intel_crtc->pipe);
+
+	val &= ~hsw_infoframe_enable(frame);
+	I915_WRITE(ctl_reg, val);
+
+	for (i = 0; i < len; i += 4) {
+		I915_WRITE(data_reg + i, *data);
+		data++;
+	}
 
+	val |= hsw_infoframe_enable(frame);
+	I915_WRITE(ctl_reg, val);
 }
 
 static void intel_set_infoframe(struct drm_encoder *encoder,
-- 
1.7.9.5




More information about the Intel-gfx mailing list