[Intel-gfx] [PATCH] drm/i915: Adding TV Out Missing modes.

[Rodrigo Vivi]

These 2 modes were removed by mistake during a clean up.
So, now it is time to add them back. For further info about
supported mode and standard timing table please check:
VOL_3_display_registers_updated.pdf at intellinuxgraphics.org.

Reported-by: Robert Lowery <rglowery at exemail.com.au>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
---
 drivers/gpu/drm/i915/intel_tv.c |   48 +++++++++++++++++++++++++++++++++++++++
 1 files changed, 48 insertions(+), 0 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c
index 3346612..22f79b3 100644
--- a/drivers/gpu/drm/i915/intel_tv.c
+++ b/drivers/gpu/drm/i915/intel_tv.c
@@ -674,6 +674,54 @@ static const struct tv_mode tv_modes[] = {
 		.filter_table = filter_table,
 	},
 	{
+		.name       = "480p",
+		.clock		= 107520,
+		.refresh	= 59940,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 122,
+		.hblank_start   = 842,              .htotal             = 857,
+
+		.progressive    = true,		    .trilevel_sync = false,
+
+		.vsync_start_f1 = 12,               .vsync_start_f2     = 12,
+		.vsync_len      = 12,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 44,               .vi_end_f2          = 44,
+		.nbr_end        = 479,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "576p",
+		.clock		= 107520,
+		.refresh	= 50000,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 139,
+		.hblank_start   = 859,              .htotal             = 863,
+
+		.progressive    = true,		    .trilevel_sync = false,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 48,               .vi_end_f2          = 48,
+		.nbr_end        = 575,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
 		.name       = "720p at 60Hz",
 		.clock		= 148800,
 		.refresh	= 60000,
-- 
1.7.7.6