[Intel-gfx] [PATCH 3/5] drm/i915: Implement proper clipping for video sprites

ville.syrjala at linux.intel.com ville.syrjala at linux.intel.com
Thu May 24 20:13:45 CEST 2012


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Properly clip the source when the destination gets clipped
by the pipe dimensions.

Sadly the video sprite hardware is rather limited so it can't do proper
sub-pixel postitioning. Resort to a best effort approach, where the
source coordinates are rounded to the nearest (macro)pixel boundary.

Also do some additional checking against various hardware limits.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_sprite.c |  170 +++++++++++++++++++++++------------
 1 files changed, 112 insertions(+), 58 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 2a20fb0..363a16e 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -127,11 +127,14 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
 	I915_WRITE(SPRSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(SPRPOS(pipe), (crtc_y << 16) | crtc_x);
 	if (obj->tiling_mode != I915_TILING_NONE) {
+		y += fb->offsets[0] / fb->pitches[0];
+		x += fb->offsets[0] % fb->pitches[0] / pixel_size;
+
 		I915_WRITE(SPRTILEOFF(pipe), (y << 16) | x);
 	} else {
 		unsigned long offset;
 
-		offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+		offset = fb->offsets[0] + y * fb->pitches[0] + x * pixel_size;
 		I915_WRITE(SPRLINOFF(pipe), offset);
 	}
 	I915_WRITE(SPRSIZE(pipe), (crtc_h << 16) | crtc_w);
@@ -288,11 +291,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb,
 	I915_WRITE(DVSSTRIDE(pipe), fb->pitches[0]);
 	I915_WRITE(DVSPOS(pipe), (crtc_y << 16) | crtc_x);
 	if (obj->tiling_mode != I915_TILING_NONE) {
+		y += fb->offsets[0] / fb->pitches[0];
+		x += fb->offsets[0] % fb->pitches[0] / pixel_size;
+
 		I915_WRITE(DVSTILEOFF(pipe), (y << 16) | x);
 	} else {
 		unsigned long offset;
 
-		offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8);
+		offset = fb->offsets[0] + y * fb->pitches[0] + x * pixel_size;
 		I915_WRITE(DVSLINOFF(pipe), offset);
 	}
 	I915_WRITE(DVSSIZE(pipe), (crtc_h << 16) | crtc_w);
@@ -394,6 +400,20 @@ ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key)
 		key->flags = I915_SET_COLORKEY_NONE;
 }
 
+static bool
+format_is_yuv(uint32_t format)
+{
+	switch (format) {
+	case DRM_FORMAT_YUYV:
+	case DRM_FORMAT_UYVY:
+	case DRM_FORMAT_VYUY:
+	case DRM_FORMAT_YVYU:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static int
 intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		   struct drm_framebuffer *fb, int crtc_x, int crtc_y,
@@ -405,66 +425,98 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	struct intel_plane *intel_plane = to_intel_plane(plane);
-	struct intel_framebuffer *intel_fb;
-	struct drm_i915_gem_object *obj, *old_obj;
+	struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+	struct drm_i915_gem_object *obj = intel_fb->obj;
+	struct drm_i915_gem_object *old_obj = intel_plane->obj;
 	int pipe = intel_plane->pipe;
 	int ret = 0;
-	int x = src_x >> 16, y = src_y >> 16;
 	int primary_w = crtc->mode.hdisplay, primary_h = crtc->mode.vdisplay;
 	bool disable_primary = false;
-
-	intel_fb = to_intel_framebuffer(fb);
-	obj = intel_fb->obj;
-
-	old_obj = intel_plane->obj;
-
-	src_w = src_w >> 16;
-	src_h = src_h >> 16;
-
-	/* Pipe must be running... */
-	if (!(I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE))
-		return -EINVAL;
-
-	if (crtc_x >= primary_w || crtc_y >= primary_h)
-		return -EINVAL;
+	bool visible;
+	int hscale, vscale;
+	int cpp = drm_format_plane_cpp(fb->pixel_format, 0);
+	struct drm_region src = {
+		.x1 = src_x,
+		.x2 = src_x + src_w,
+		.y1 = src_y,
+		.y2 = src_y + src_h,
+	};
+	struct drm_region dst = {
+		.x1 = crtc_x,
+		.x2 = crtc_x + crtc_w,
+		.y1 = crtc_y,
+		.y2 = crtc_y + crtc_h,
+	};
+	const struct drm_region clip = {
+		.x2 = crtc->mode.hdisplay,
+		.y2 = crtc->mode.vdisplay,
+	};
 
 	/* Don't modify another pipe's plane */
 	if (intel_plane->pipe != intel_crtc->pipe)
 		return -EINVAL;
 
-	/*
-	 * Clamp the width & height into the visible area.  Note we don't
-	 * try to scale the source if part of the visible region is offscreen.
-	 * The caller must handle that by adjusting source offset and size.
-	 */
-	if ((crtc_x < 0) && ((crtc_x + crtc_w) > 0)) {
-		crtc_w += crtc_x;
-		crtc_x = 0;
-	}
-	if ((crtc_x + crtc_w) <= 0) /* Nothing to display */
-		goto out;
-	if ((crtc_x + crtc_w) > primary_w)
-		crtc_w = primary_w - crtc_x;
-
-	if ((crtc_y < 0) && ((crtc_y + crtc_h) > 0)) {
-		crtc_h += crtc_y;
-		crtc_y = 0;
-	}
-	if ((crtc_y + crtc_h) <= 0) /* Nothing to display */
-		goto out;
-	if (crtc_y + crtc_h > primary_h)
-		crtc_h = primary_h - crtc_y;
-
-	if (!crtc_w || !crtc_h) /* Again, nothing to display */
-		goto out;
-
-	/*
-	 * We can take a larger source and scale it down, but
-	 * only so much...  16x is the max on SNB.
-	 */
-	if (((src_w * src_h) / (crtc_w * crtc_h)) > intel_plane->max_downscale)
+	if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384)
 		return -EINVAL;
 
+	hscale = drm_calc_hscale(&src, &dst, 1, intel_plane->max_downscale << 16);
+	vscale = drm_calc_vscale(&src, &dst, 1, intel_plane->max_downscale << 16);
+
+	visible = drm_region_clip_scaled(&src, &dst, &clip, hscale, vscale);
+
+	crtc_x = dst.x1;
+	crtc_y = dst.y1;
+	crtc_w = drm_region_width(&dst);
+	crtc_h = drm_region_height(&dst);
+
+	/* HW doesn't seem to like smaller sprite, even when scaling */
+	/* FIXME return an error instead? */
+	if (crtc_w < 3 || crtc_h < 3)
+		visible = false;
+
+	/*
+	 * Hardware doesn't handle subpixel coordinates.
+	 * Round to nearest (macro)pixel boundary.
+	 */
+	if (format_is_yuv(fb->pixel_format)) {
+		src_x = ((src.x1 + 0x10000) >> 17) << 1;
+		src_w = (((src.x2 + 0x10000) >> 17) << 1) - src_x;
+	} else {
+		src_x = (src.x1 + 0x8000) >> 16;
+		src_w = ((src.x2 + 0x8000) >> 16) - src_x;
+	}
+	src_y = (src.y1 + 0x8000) >> 16;
+	src_h = ((src.y2 + 0x8000) >> 16) - src_y;
+
+	/* Account for minimum source size when scaling */
+	if (visible && (src_w != crtc_w || src_h != crtc_h)) {
+		unsigned int min_w = format_is_yuv(fb->pixel_format) ? 4 : 3;
+
+		if (src_w < min_w) {
+			src_w = min_w;
+			if (src_x > fb->width - src_w)
+				src_x = fb->width - src_w;
+		}
+
+		/* FIXME interlacing */
+		if (src_h < 3) {
+			src_h = 3;
+			if (src_y > fb->height - src_h)
+				src_y = fb->height - src_h;
+		}
+	}
+
+	/* Check size restrictions when scaling */
+	if (visible && (src_w != crtc_w || src_h != crtc_h)) {
+		if (src_w > 2048 || src_h > 2048 ||
+		    src_w * cpp > 4096 - 64 || fb->pitches[0] > 4096)
+			return -EINVAL;
+	}
+
+	/* Pipe must be running... */
+	if (!(I915_READ(PIPECONF(pipe)) & PIPECONF_ENABLE))
+		return 0;
+
 	/*
 	 * If the sprite is completely covering the primary plane,
 	 * we can disable the primary and save power.
@@ -490,13 +542,16 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 		intel_plane->primary_disabled = false;
 	}
 
-	intel_plane->update_plane(plane, fb, obj, crtc_x, crtc_y,
-				  crtc_w, crtc_h, x, y, src_w, src_h);
+	if (visible) {
+		intel_plane->update_plane(plane, fb, obj, crtc_x, crtc_y,
+					  crtc_w, crtc_h, src_x, src_y, src_w, src_h);
 
-	if (disable_primary) {
-		intel_disable_primary(crtc);
-		intel_plane->primary_disabled = true;
-	}
+		if (disable_primary) {
+			intel_disable_primary(crtc);
+			intel_plane->primary_disabled = true;
+		}
+	} else
+		intel_plane->disable_plane(plane);
 
 	/* Unpin old obj after new one is active to avoid ugliness */
 	if (old_obj) {
@@ -516,7 +571,6 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 
 out_unlock:
 	mutex_unlock(&dev->struct_mutex);
-out:
 	return ret;
 }
 
-- 
1.7.3.4




More information about the Intel-gfx mailing list