[Intel-gfx] [PATCH 1/4 v2] drm/i915: Dynamic Parity Detection handling
Ben Widawsky
ben at bwidawsk.net
Sat May 26 01:56:22 CEST 2012
On IVB hardware we are given an interrupt whenever a L3 parity error
occurs in the L3 cache. The L3 cache is used by internal GPU clients
only. This is a very rare occurrence (in fact to test this I need to
use specially instrumented silicon).
When a row in the L3 cache detects a parity error the HW generates an
interrupt. The interrupt is masked in GTIMR until we get a chance to
read some registers and alert userspace via a uevent. With this
information userspace can use a sysfs interface (follow-up patch) to
remap those rows.
Way above my level of understanding, but if a given row fails, it is
statistically more likely to fail again than a row which has not failed.
Therefore it is desirable for an operating system to maintain a lifelong
list of failing rows and always remap any bad rows on driver load.
Hardware limits the number of rows that are remappable per bank/subbank,
and should more than that many rows detect parity errors, software
should maintain a list of the most frequent errors, and remap those
rows.
V2: Drop WARN_ON(IS_GEN6) (Jesse)
DRM_DEBUG row/bank/subbank on errror (Jesse)
Comment updates (Jesse)
Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben at bwidawsk.net>
---
drivers/gpu/drm/i915/i915_drv.h | 2 +
drivers/gpu/drm/i915/i915_irq.c | 86 +++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_reg.h | 17 ++++++++
3 files changed, 105 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index a17e31e..504f53e 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -816,6 +816,8 @@ typedef struct drm_i915_private {
struct drm_property *broadcast_rgb_property;
struct drm_property *force_audio_property;
+
+ struct work_struct parity_error_work;
} drm_i915_private_t;
/* Iterate over initialised rings */
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 5134a62..c526635 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -398,6 +398,86 @@ static void gen6_pm_rps_work(struct work_struct *work)
mutex_unlock(&dev_priv->dev->struct_mutex);
}
+
+/**
+ * ivybridge_parity_work - Workqueue called when a parity error interrupt
+ * occurred.
+ * @work: workqueue struct
+ *
+ * Doesn't actually do anything except notify userspace. As a consequence of
+ * this event, userspace should try to remap the bad rows since statistically
+ * it is likely the same row is more likely to go bad again.
+ */
+static void ivybridge_parity_work(struct work_struct *work)
+{
+ drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
+ parity_error_work);
+ u32 error_status, row, bank, subbank;
+ char *parity_event[5];
+ uint32_t misccpctl;
+ unsigned long flags;
+
+ /* We must turn off DOP level clock gating to access the L3 registers.
+ * In order to prevent a get/put style interface, acquire struct mutex
+ * any time we access those registers.
+ */
+ mutex_lock(&dev_priv->dev->struct_mutex);
+
+ misccpctl = I915_READ(GEN7_MISCCPCTL);
+ I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
+ POSTING_READ(GEN7_MISCCPCTL);
+
+ error_status = I915_READ(GEN7_L3CDERRST1);
+ row = GEN7_PARITY_ERROR_ROW(error_status);
+ bank = GEN7_PARITY_ERROR_BANK(error_status);
+ subbank = GEN7_PARITY_ERROR_SUBBANK(error_status);
+
+ I915_WRITE(GEN7_L3CDERRST1, GEN7_PARITY_ERROR_VALID |
+ GEN7_L3CDERRST1_ENABLE);
+ POSTING_READ(GEN7_L3CDERRST1);
+
+ I915_WRITE(GEN7_MISCCPCTL, misccpctl);
+
+ spin_lock_irqsave(&dev_priv->irq_lock, flags);
+ dev_priv->gt_irq_mask &= ~GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
+ I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+
+ mutex_unlock(&dev_priv->dev->struct_mutex);
+
+ parity_event[0] = "L3_PARITY_ERROR=1";
+ parity_event[1] = kasprintf(GFP_KERNEL, "ROW=%d", row);
+ parity_event[2] = kasprintf(GFP_KERNEL, "BANK=%d", bank);
+ parity_event[3] = kasprintf(GFP_KERNEL, "SUBBANK=%d", subbank);
+ parity_event[4] = NULL;
+
+ kobject_uevent_env(&dev_priv->dev->primary->kdev.kobj,
+ KOBJ_CHANGE, parity_event);
+
+ DRM_DEBUG("Parity error: Row = %d, Bank = %d, Sub bank = %d.\n",
+ row, bank, subbank);
+
+ kfree(parity_event[3]);
+ kfree(parity_event[2]);
+ kfree(parity_event[1]);
+}
+
+void ivybridge_handle_parity_error(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long flags;
+
+ if (!IS_IVYBRIDGE(dev))
+ return;
+
+ spin_lock_irqsave(&dev_priv->irq_lock, flags);
+ dev_priv->gt_irq_mask |= GT_GEN7_L3_PARITY_ERROR_INTERRUPT;
+ I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
+ spin_unlock_irqrestore(&dev_priv->irq_lock, flags);
+
+ queue_work(dev_priv->wq, &dev_priv->parity_error_work);
+}
+
static void snb_gt_irq_handler(struct drm_device *dev,
struct drm_i915_private *dev_priv,
u32 gt_iir)
@@ -417,6 +497,9 @@ static void snb_gt_irq_handler(struct drm_device *dev,
DRM_ERROR("GT error interrupt 0x%08x\n", gt_iir);
i915_handle_error(dev, false);
}
+
+ if (gt_iir & GT_GEN7_L3_PARITY_ERROR_INTERRUPT)
+ ivybridge_handle_parity_error(dev);
}
static void gen6_queue_rps_work(struct drm_i915_private *dev_priv,
@@ -1641,6 +1724,9 @@ static void ironlake_irq_preinstall(struct drm_device *dev)
atomic_set(&dev_priv->irq_received, 0);
+ if (IS_IVYBRIDGE(dev))
+ INIT_WORK(&dev_priv->parity_error_work, ivybridge_parity_work);
+
I915_WRITE(HWSTAM, 0xeffe);
/* XXX hotplug from PCH */
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0f45a18..4d53dbd 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4088,6 +4088,23 @@
#define GEN6_RC6 3
#define GEN6_RC7 4
+#define GEN7_MISCCPCTL (0x9424)
+#define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0)
+
+/* IVYBRIDGE DPF */
+#define GEN7_L3CDERRST1 0xB008 /* L3CD Error Status 1 */
+#define GEN7_L3CDERRST1_ROW_MASK (0x7ff<<14)
+#define GEN7_PARITY_ERROR_VALID (1<<13)
+#define GEN7_L3CDERRST1_BANK_MASK (3<<11)
+#define GEN7_L3CDERRST1_SUBBANK_MASK (7<<8)
+#define GEN7_PARITY_ERROR_ROW(reg) \
+ ((reg & GEN7_L3CDERRST1_ROW_MASK) >> 14)
+#define GEN7_PARITY_ERROR_BANK(reg) \
+ ((reg & GEN7_L3CDERRST1_BANK_MASK) >> 11)
+#define GEN7_PARITY_ERROR_SUBBANK(reg) \
+ ((reg & GEN7_L3CDERRST1_SUBBANK_MASK) >> 8)
+#define GEN7_L3CDERRST1_ENABLE (1<<7)
+
#define G4X_AUD_VID_DID 0x62020
#define INTEL_AUDIO_DEVCL 0x808629FB
#define INTEL_AUDIO_DEVBLC 0x80862801
--
1.7.10.2
More information about the Intel-gfx
mailing list