[Intel-gfx] [PATCH 1/2] drm/i915: do not ignore eDP bpc settings from vbt

[Jani Nikula]

There are laptops out there that need the eDP bpc from VBT. This is
effectively a revert of

commit 4344b813f105a19f793f1fd93ad775b784648b95
Author: Daniel Vetter <daniel.vetter at ffwll.ch>
Date:   Fri Aug 10 11:10:20 2012 +0200

    drm/i915: ignore eDP bpc settings from vbt

but putting the VBT check after the EDID check to see them both in dmesg if
this clamps more than the EDID. We have enough history with bpc clamping to
warrant the extra debug info.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47641
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56401
Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 6d8a5ed..0997e60 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4151,6 +4151,17 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 			}
 		}
 
+		if (intel_encoder->type == INTEL_OUTPUT_EDP) {
+			/* Use VBT settings if we have an eDP panel */
+			unsigned int edp_bpc = dev_priv->edp.bpp / 3;
+
+			if (edp_bpc < display_bpc) {
+				DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc);
+				display_bpc = edp_bpc;
+			}
+			continue;
+		}
+
 		/*
 		 * HDMI is either 12 or 8, so if the display lets 10bpc sneak
 		 * through, clamp it down.  (Note: >12bpc will be caught below.)
-- 
1.7.9.5