[Intel-gfx] [PATCH 01/17] drm/i915: add encoder->pre_pll_enable callback

[Daniel Vetter]

Currently we have two encoder specific bits in the common mode_set
functions:
- lvds pin pair enabling
- dp m/n setting and computation

Now the lvds stuff needs to happen before the pll is enabled. Since
that is done in the crtc_mode_set functions, we need to add a new
callback to be able to move them to the encoder code (where they
belong). The dp m/n stuff is a giant mess anyway (since it also
confuses itself with the fdi link m/n handling), so that needs to be
handled separately.

I think that we can move the pll enabling down quite a bit, which
might allow us to eventually merge encoder->pre_enable with this new
pre_pll_enable callback. But for now this will allow us to clean
things up a bit.

Note that vlv doesn't support lvds, hence we don't need to change
anything in there.

v2: Fixup commit message, both suggested from Paulo Zanoni.
- dp m/n doesn't need to happen before pll enabling
- lvds doesn't exist on vlv, hence no changes required in the vlv pll
  function.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++++
 drivers/gpu/drm/i915/intel_drv.h     |  1 +
 2 files changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 769fc8f..647f16e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4462,6 +4462,7 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	u32 dpll;
 	bool is_sdvo;
@@ -4530,6 +4531,10 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
+
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
@@ -4574,6 +4579,7 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	u32 dpll;
 
@@ -4607,6 +4613,10 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
 	POSTING_READ(DPLL(pipe));
 	udelay(150);
 
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
+
 	/* The LVDS pin pair needs to be on before the DPLLs are enabled.
 	 * This is an exception to the general rule that mode_set doesn't turn
 	 * things on.
@@ -5535,6 +5545,10 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 		I915_WRITE(TRANSDPLINK_N1(pipe), 0);
 	}
 
+	for_each_encoder_on_crtc(dev, crtc, encoder)
+		if (encoder->pre_pll_enable)
+			encoder->pre_pll_enable(encoder);
+
 	if (intel_crtc->pch_pll) {
 		I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
 
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index bcc5241..42a40a1 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -153,6 +153,7 @@ struct intel_encoder {
 	bool cloneable;
 	bool connectors_active;
 	void (*hot_plug)(struct intel_encoder *);
+	void (*pre_pll_enable)(struct intel_encoder *);
 	void (*pre_enable)(struct intel_encoder *);
 	void (*enable)(struct intel_encoder *);
 	void (*disable)(struct intel_encoder *);
-- 
1.7.11.7