[Intel-gfx] [PATCH 08/17] drm/i915: rip out pre-DDI stuff from haswell_crtc_mode_set

Paulo Zanoni przanoni at gmail.com
Tue Nov 27 18:11:53 CET 2012


Hi

2012/11/26 Daniel Vetter <daniel.vetter at ffwll.ch>:
> Especially getting rid of all things lvds is ... great!
>
> v2: Drop the two additional pre-hsw hunks noticed by Paulo Zanoni.
>
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 126 +----------------------------------
>  1 file changed, 1 insertion(+), 125 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 8f6362e..40f63b0 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -5341,9 +5341,6 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
>                 num_connectors++;
>         }
>
> -       WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)),
> -            "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev));
> -
>         ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
>                                      &has_reduced_clock, &reduced_clock);
>         if (!ok) {
> @@ -5462,23 +5459,14 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
>         int pipe = intel_crtc->pipe;
>         int plane = intel_crtc->plane;
>         int num_connectors = 0;
> -       intel_clock_t clock, reduced_clock;
> -       u32 dpll = 0, fp = 0, fp2 = 0;
> -       bool ok, has_reduced_clock = false;
> -       bool is_lvds = false, is_dp = false, is_cpu_edp = false;
> +       bool is_dp = false, is_cpu_edp = false;
>         struct intel_encoder *encoder;
> -       u32 temp;
>         int ret;
>         bool dither;
>
>         for_each_encoder_on_crtc(dev, crtc, encoder) {
>                 switch (encoder->type) {
> -               case INTEL_OUTPUT_LVDS:
> -                       is_lvds = true;
> -                       break;
>                 case INTEL_OUTPUT_DISPLAYPORT:
> -                       is_dp = true;
> -                       break;

Removing these 2 lines is wrong. Since my "normal DP" is not a "pch
edp", we set "is_cpu_edp = true" and then everything breaks.

>                 case INTEL_OUTPUT_EDP:
>                         is_dp = true;
>                         if (!intel_encoder_is_pch_edp(&encoder->base))
> @@ -5509,133 +5497,21 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
>         if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock))
>                 return -EINVAL;
>
> -       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
> -               ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock,
> -                                            &has_reduced_clock,
> -                                            &reduced_clock);
> -               if (!ok) {
> -                       DRM_ERROR("Couldn't find PLL settings for mode!\n");
> -                       return -EINVAL;
> -               }
> -       }
> -
>         /* Ensure that the cursor is valid for the new mode before changing... */
>         intel_crtc_update_cursor(crtc, true);
>
>         /* determine panel color depth */
>         dither = intel_choose_pipe_bpp_dither(crtc, fb, &intel_crtc->bpp,
>                                               adjusted_mode);
> -       if (is_lvds && dev_priv->lvds_dither)
> -               dither = true;
>
>         DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe);
>         drm_mode_debug_printmodeline(mode);
>
> -       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
> -               fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
> -               if (has_reduced_clock)
> -                       fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
> -                             reduced_clock.m2;
> -
> -               dpll = ironlake_compute_dpll(intel_crtc, adjusted_mode, &clock,
> -                                            fp);
> -
> -               /* CPU eDP is the only output that doesn't need a PCH PLL of its
> -                * own on pre-Haswell/LPT generation */
> -               if (!is_cpu_edp) {
> -                       struct intel_pch_pll *pll;
> -
> -                       pll = intel_get_pch_pll(intel_crtc, dpll, fp);
> -                       if (pll == NULL) {
> -                               DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n",
> -                                                pipe);
> -                               return -EINVAL;
> -                       }
> -               } else
> -                       intel_put_pch_pll(intel_crtc);
> -
> -               /* The LVDS pin pair needs to be on before the DPLLs are
> -                * enabled.  This is an exception to the general rule that
> -                * mode_set doesn't turn things on.
> -                */
> -               if (is_lvds) {
> -                       temp = I915_READ(PCH_LVDS);
> -                       temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP;
> -                       if (HAS_PCH_CPT(dev)) {
> -                               temp &= ~PORT_TRANS_SEL_MASK;
> -                               temp |= PORT_TRANS_SEL_CPT(pipe);
> -                       } else {
> -                               if (pipe == 1)
> -                                       temp |= LVDS_PIPEB_SELECT;
> -                               else
> -                                       temp &= ~LVDS_PIPEB_SELECT;
> -                       }
> -
> -                       /* set the corresponsding LVDS_BORDER bit */
> -                       temp |= dev_priv->lvds_border_bits;
> -                       /* Set the B0-B3 data pairs corresponding to whether
> -                        * we're going to set the DPLLs for dual-channel mode or
> -                        * not.
> -                        */
> -                       if (clock.p2 == 7)
> -                               temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP;
> -                       else
> -                               temp &= ~(LVDS_B0B3_POWER_UP |
> -                                         LVDS_CLKB_POWER_UP);
> -
> -                       /* It would be nice to set 24 vs 18-bit mode
> -                        * (LVDS_A3_POWER_UP) appropriately here, but we need to
> -                        * look more thoroughly into how panels behave in the
> -                        * two modes.
> -                        */
> -                       temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY);
> -                       if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
> -                               temp |= LVDS_HSYNC_POLARITY;
> -                       if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC)
> -                               temp |= LVDS_VSYNC_POLARITY;
> -                       I915_WRITE(PCH_LVDS, temp);
> -               }
> -       }
> -
>         if (is_dp && !is_cpu_edp) {
>                 intel_dp_set_m_n(crtc, mode, adjusted_mode);
> -       } else {
> -               if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
> -                       /* For non-DP output, clear any trans DP clock recovery
> -                        * setting.*/
> -                       I915_WRITE(TRANSDATA_M1(pipe), 0);
> -                       I915_WRITE(TRANSDATA_N1(pipe), 0);
> -                       I915_WRITE(TRANSDPLINK_M1(pipe), 0);
> -                       I915_WRITE(TRANSDPLINK_N1(pipe), 0);
> -               }
>         }
>
>         intel_crtc->lowfreq_avail = false;
> -       if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) {
> -               if (intel_crtc->pch_pll) {
> -                       I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
> -
> -                       /* Wait for the clocks to stabilize. */
> -                       POSTING_READ(intel_crtc->pch_pll->pll_reg);
> -                       udelay(150);
> -
> -                       /* The pixel multiplier can only be updated once the
> -                        * DPLL is enabled and the clocks are stable.
> -                        *
> -                        * So write it again.
> -                        */
> -                       I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll);
> -               }
> -
> -               if (intel_crtc->pch_pll) {
> -                       if (is_lvds && has_reduced_clock && i915_powersave) {
> -                               I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2);
> -                               intel_crtc->lowfreq_avail = true;
> -                       } else {
> -                               I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp);
> -                       }
> -               }
> -       }
>
>         intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
>
> --
> 1.7.11.7
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx



-- 
Paulo Zanoni



More information about the Intel-gfx mailing list