[Intel-gfx] [PATCH 06/10] drm/i915: add haswell_set_pipeconf

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni at intel.com>

It's a copy of ironlake_set_pipeconf with 2 differences:
  - There is no BPC field to set.
  - The interlaced mask is now 2 bits instead of 3.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++++++++-
 2 files changed, 27 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d1b58d0..fd9a319 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2639,6 +2639,7 @@
 #define   PIPECONF_GAMMA		(1<<24)
 #define   PIPECONF_FORCE_BORDER	(1<<25)
 #define   PIPECONF_INTERLACE_MASK	(7 << 21)
+#define   PIPECONF_INTERLACE_MASK_HSW	(3 << 21)
 /* Note that pre-gen3 does not support interlaced display directly. Panel
  * fitting must be disabled on pre-ilk for interlaced. */
 #define   PIPECONF_PROGRESSIVE			(0 << 21)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 213831f..39d0753 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4721,6 +4721,31 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc,
 	POSTING_READ(PIPECONF(pipe));
 }
 
+static void haswell_set_pipeconf(struct drm_crtc *crtc,
+				 struct drm_display_mode *adjusted_mode,
+				 bool dither)
+{
+	struct drm_i915_private *dev_priv = crtc->dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	uint32_t val;
+
+	val = I915_READ(PIPECONF(pipe));
+
+	val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK);
+	if (dither)
+		val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
+
+	val &= ~PIPECONF_INTERLACE_MASK_HSW;
+	if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
+		val |= PIPECONF_INTERLACED_ILK;
+	else
+		val |= PIPECONF_PROGRESSIVE;
+
+	I915_WRITE(PIPECONF(pipe), val);
+	POSTING_READ(PIPECONF(pipe));
+}
+
 static bool ironlake_compute_clocks(struct drm_crtc *crtc,
 				    struct drm_display_mode *adjusted_mode,
 				    intel_clock_t *clock,
@@ -5322,7 +5347,7 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc,
 		if (is_cpu_edp)
 			ironlake_set_pll_edp(crtc, adjusted_mode->clock);
 
-	ironlake_set_pipeconf(crtc, adjusted_mode, dither);
+	haswell_set_pipeconf(crtc, adjusted_mode, dither);
 
 	intel_wait_for_vblank(dev, pipe);
 
-- 
1.7.11.4