[Intel-gfx] [PATCH 09/14] drm/i915: fix DP AUX register definitions on Haswell

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni at intel.com>

The old rule that the AUX registers are just an offset (+4 and +10)
from output_reg is not true anymore, since output_reg in on the CPU
and some AUX regs are on the PCH.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h |  8 ++++++++
 drivers/gpu/drm/i915/intel_dp.c | 23 +++++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 68ce163..84d9e69c 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2548,6 +2548,14 @@
 #define DPD_AUX_CH_DATA4		0x64320
 #define DPD_AUX_CH_DATA5		0x64324
 
+#define PCH_DPB_AUX_CH_CTL		0xe4110
+#define PCH_DPC_AUX_CH_CTL		0xe4210
+#define PCH_DPD_AUX_CH_CTL		0xe4310
+
+#define PCH_DPB_AUX_CH_DATA		0xe4114
+#define PCH_DPC_AUX_CH_DATA		0xe4214
+#define PCH_DPD_AUX_CH_DATA		0xe4314
+
 #define   DP_AUX_CH_CTL_SEND_BUSY	    (1 << 31)
 #define   DP_AUX_CH_CTL_DONE		    (1 << 30)
 #define   DP_AUX_CH_CTL_INTERRUPT	    (1 << 29)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 22702df..3a5fe2f 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -356,6 +356,29 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	uint32_t aux_clock_divider;
 	int try, precharge;
 
+	if (IS_HASWELL(dev)) {
+		switch (intel_dp->port) {
+		case PORT_A:
+			ch_ctl = DPA_AUX_CH_CTL;
+			ch_data = DPA_AUX_CH_DATA1;
+			break;
+		case PORT_B:
+			ch_ctl = PCH_DPB_AUX_CH_CTL;
+			ch_data = PCH_DPB_AUX_CH_DATA;
+			break;
+		case PORT_C:
+			ch_ctl = PCH_DPC_AUX_CH_CTL;
+			ch_data = PCH_DPC_AUX_CH_DATA;
+			break;
+		case PORT_D:
+			ch_ctl = PCH_DPD_AUX_CH_CTL;
+			ch_data = PCH_DPD_AUX_CH_DATA;
+			break;
+		default:
+			BUG();
+		}
+	}
+
 	intel_dp_check_edp(intel_dp);
 	/* The clock divider is based off the hrawclk,
 	 * and would like to run at 2MHz. So, take the
-- 
1.7.11.4