[Intel-gfx] [PATCH 2/3] drm/i915: don't save/restore irq regs for kms

Daniel Vetter daniel.vetter at ffwll.ch
Wed Oct 17 11:32:56 CEST 2012


We already call drm_irq_install/uninstall at the right time, which
will set up the irq registers with the correct values (through the
preinstall hooks).

For kms this is at best harmless, in the worst case we get an
interrupt when we don't really expect it.

v2: Fixup the logic, noticed by Paulo Zanoni.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/i915_suspend.c | 56 ++++++++++++++++++++-----------------
 1 file changed, 30 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 3d12147..ac6d412 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -818,20 +818,22 @@ int i915_save_state(struct drm_device *dev)
 
 	i915_save_display(dev);
 
-	/* Interrupt state */
-	if (HAS_PCH_SPLIT(dev)) {
-		dev_priv->saveDEIER = I915_READ(DEIER);
-		dev_priv->saveDEIMR = I915_READ(DEIMR);
-		dev_priv->saveGTIER = I915_READ(GTIER);
-		dev_priv->saveGTIMR = I915_READ(GTIMR);
-		dev_priv->saveFDI_RXA_IMR = I915_READ(_FDI_RXA_IMR);
-		dev_priv->saveFDI_RXB_IMR = I915_READ(_FDI_RXB_IMR);
-		dev_priv->saveMCHBAR_RENDER_STANDBY =
-			I915_READ(RSTDBYCTL);
-		dev_priv->savePCH_PORT_HOTPLUG = I915_READ(PCH_PORT_HOTPLUG);
-	} else {
-		dev_priv->saveIER = I915_READ(IER);
-		dev_priv->saveIMR = I915_READ(IMR);
+	if (!drm_core_check_feature(dev, DRIVER_MODESET)) {
+		/* Interrupt state */
+		if (HAS_PCH_SPLIT(dev)) {
+			dev_priv->saveDEIER = I915_READ(DEIER);
+			dev_priv->saveDEIMR = I915_READ(DEIMR);
+			dev_priv->saveGTIER = I915_READ(GTIER);
+			dev_priv->saveGTIMR = I915_READ(GTIMR);
+			dev_priv->saveFDI_RXA_IMR = I915_READ(_FDI_RXA_IMR);
+			dev_priv->saveFDI_RXB_IMR = I915_READ(_FDI_RXB_IMR);
+			dev_priv->saveMCHBAR_RENDER_STANDBY =
+				I915_READ(RSTDBYCTL);
+			dev_priv->savePCH_PORT_HOTPLUG = I915_READ(PCH_PORT_HOTPLUG);
+		} else {
+			dev_priv->saveIER = I915_READ(IER);
+			dev_priv->saveIMR = I915_READ(IMR);
+		}
 	}
 
 	intel_disable_gt_powersave(dev);
@@ -869,18 +871,20 @@ int i915_restore_state(struct drm_device *dev)
 
 	i915_restore_display(dev);
 
-	/* Interrupt state */
-	if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(DEIER, dev_priv->saveDEIER);
-		I915_WRITE(DEIMR, dev_priv->saveDEIMR);
-		I915_WRITE(GTIER, dev_priv->saveGTIER);
-		I915_WRITE(GTIMR, dev_priv->saveGTIMR);
-		I915_WRITE(_FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
-		I915_WRITE(_FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
-		I915_WRITE(PCH_PORT_HOTPLUG, dev_priv->savePCH_PORT_HOTPLUG);
-	} else {
-		I915_WRITE(IER, dev_priv->saveIER);
-		I915_WRITE(IMR, dev_priv->saveIMR);
+	if (!drm_core_check_feature(dev, DRIVER_MODESET)) {
+		/* Interrupt state */
+		if (HAS_PCH_SPLIT(dev)) {
+			I915_WRITE(DEIER, dev_priv->saveDEIER);
+			I915_WRITE(DEIMR, dev_priv->saveDEIMR);
+			I915_WRITE(GTIER, dev_priv->saveGTIER);
+			I915_WRITE(GTIMR, dev_priv->saveGTIMR);
+			I915_WRITE(_FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
+			I915_WRITE(_FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
+			I915_WRITE(PCH_PORT_HOTPLUG, dev_priv->savePCH_PORT_HOTPLUG);
+		} else {
+			I915_WRITE(IER, dev_priv->saveIER);
+			I915_WRITE(IMR, dev_priv->saveIMR);
+		}
 	}
 
 	/* Cache mode state */
-- 
1.7.11.7




More information about the Intel-gfx mailing list