[Intel-gfx] [PATCH 05/10] drm/i915/lvds: Move some connector specific info across from the encoder
Jesse Barnes
jbarnes at virtuousgeek.org
Fri Oct 19 18:55:49 CEST 2012
On Fri, 19 Oct 2012 14:51:47 +0300
Jani Nikula <jani.nikula at intel.com> wrote:
> As there is 1:1 mapping between encoder and connector for the LVDS, the
> goal is to simply reduce the amount of noise within the connector
> functions, i.e. we split the encoder/connector for LVDS as best we can and
> try to only operate on the LVDS connector from the connector funcs and the
> LVDS encoder form the encoder funcs.
>
> Based on earlier work by Chris Wilson <chris at chris-wilson.co.uk>
>
> CC: Chris Wilson <chris at chris-wilson.co.uk>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/intel_lvds.c | 83 +++++++++++++++++++------------------
> 1 file changed, 42 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index cdee7bf..0ed2c3b 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -45,19 +45,19 @@ struct intel_lvds_connector {
> struct intel_connector base;
>
> struct notifier_block lid_notifier;
> + struct drm_display_mode *fixed_mode;
> + struct edid *edid;
> + int fitting_mode;
> };
>
> struct intel_lvds_encoder {
> struct intel_encoder base;
>
> - struct edid *edid;
> -
> - int fitting_mode;
> u32 pfit_control;
> u32 pfit_pgm_ratios;
> bool pfit_dirty;
>
> - struct drm_display_mode *fixed_mode;
> + struct intel_lvds_connector *attached_connector;
> };
>
> static struct intel_lvds_encoder *to_lvds_encoder(struct drm_encoder *encoder)
> @@ -70,12 +70,6 @@ static struct intel_lvds_connector *to_lvds_connector(struct drm_connector *conn
> return container_of(connector, struct intel_lvds_connector, base.base);
> }
>
> -static struct intel_lvds_encoder *intel_attached_lvds(struct drm_connector *connector)
> -{
> - return container_of(intel_attached_encoder(connector),
> - struct intel_lvds_encoder, base);
> -}
> -
> static bool intel_lvds_get_hw_state(struct intel_encoder *encoder,
> enum pipe *pipe)
> {
> @@ -184,8 +178,8 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
> static int intel_lvds_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> - struct intel_lvds_encoder *lvds_encoder = intel_attached_lvds(connector);
> - struct drm_display_mode *fixed_mode = lvds_encoder->fixed_mode;
> + struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
> + struct drm_display_mode *fixed_mode = lvds_connector->fixed_mode;
>
> if (mode->hdisplay > fixed_mode->hdisplay)
> return MODE_PANEL;
> @@ -262,6 +256,8 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> struct drm_device *dev = encoder->dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(encoder);
> + struct intel_lvds_connector *lvds_connector =
> + lvds_encoder->attached_connector;
> struct intel_crtc *intel_crtc = lvds_encoder->base.new_crtc;
> u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0;
> int pipe;
> @@ -281,10 +277,10 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
> * with the panel scaling set up to source from the H/VDisplay
> * of the original mode.
> */
> - intel_fixed_panel_mode(lvds_encoder->fixed_mode, adjusted_mode);
> + intel_fixed_panel_mode(lvds_connector->fixed_mode, adjusted_mode);
>
> if (HAS_PCH_SPLIT(dev)) {
> - intel_pch_panel_fitting(dev, lvds_encoder->fitting_mode,
> + intel_pch_panel_fitting(dev, lvds_connector->fitting_mode,
> mode, adjusted_mode);
> return true;
> }
> @@ -310,7 +306,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder,
>
> drm_mode_set_crtcinfo(adjusted_mode, 0);
>
> - switch (lvds_encoder->fitting_mode) {
> + switch (lvds_connector->fitting_mode) {
> case DRM_MODE_SCALE_CENTER:
> /*
> * For centered modes, we have to calculate border widths &
> @@ -461,14 +457,14 @@ intel_lvds_detect(struct drm_connector *connector, bool force)
> */
> static int intel_lvds_get_modes(struct drm_connector *connector)
> {
> - struct intel_lvds_encoder *lvds_encoder = intel_attached_lvds(connector);
> + struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
> struct drm_device *dev = connector->dev;
> struct drm_display_mode *mode;
>
> - if (lvds_encoder->edid)
> - return drm_add_edid_modes(connector, lvds_encoder->edid);
> + if (lvds_connector->edid)
> + return drm_add_edid_modes(connector, lvds_connector->edid);
>
> - mode = drm_mode_duplicate(dev, lvds_encoder->fixed_mode);
> + mode = drm_mode_duplicate(dev, lvds_connector->fixed_mode);
> if (mode == NULL)
> return 0;
>
> @@ -569,22 +565,24 @@ static int intel_lvds_set_property(struct drm_connector *connector,
> struct drm_property *property,
> uint64_t value)
> {
> - struct intel_lvds_encoder *lvds_encoder = intel_attached_lvds(connector);
> + struct intel_lvds_connector *lvds_connector = to_lvds_connector(connector);
> struct drm_device *dev = connector->dev;
>
> if (property == dev->mode_config.scaling_mode_property) {
> - struct drm_crtc *crtc = lvds_encoder->base.base.crtc;
> + struct drm_crtc *crtc;
>
> if (value == DRM_MODE_SCALE_NONE) {
> DRM_DEBUG_KMS("no scaling not supported\n");
> return -EINVAL;
> }
>
> - if (lvds_encoder->fitting_mode == value) {
> + if (lvds_connector->fitting_mode == value) {
> /* the LVDS scaling property is not changed */
> return 0;
> }
> - lvds_encoder->fitting_mode = value;
> + lvds_connector->fitting_mode = value;
> +
> + crtc = intel_attached_encoder(connector)->base.crtc;
> if (crtc && crtc->enabled) {
> /*
> * If the CRTC is enabled, the display will be changed
> @@ -960,6 +958,8 @@ bool intel_lvds_init(struct drm_device *dev)
> return false;
> }
>
> + lvds_encoder->attached_connector = lvds_connector;
> +
> if (!HAS_PCH_SPLIT(dev)) {
> lvds_encoder->pfit_control = I915_READ(PFIT_CONTROL);
> }
> @@ -1005,7 +1005,7 @@ bool intel_lvds_init(struct drm_device *dev)
> drm_connector_attach_property(&intel_connector->base,
> dev->mode_config.scaling_mode_property,
> DRM_MODE_SCALE_ASPECT);
> - lvds_encoder->fitting_mode = DRM_MODE_SCALE_ASPECT;
> + lvds_connector->fitting_mode = DRM_MODE_SCALE_ASPECT;
> /*
> * LVDS discovery:
> * 1) check for EDID on DDC
> @@ -1020,18 +1020,18 @@ bool intel_lvds_init(struct drm_device *dev)
> * Attempt to get the fixed panel mode from DDC. Assume that the
> * preferred mode is the right one.
> */
> - lvds_encoder->edid = drm_get_edid(connector,
> - intel_gmbus_get_adapter(dev_priv, pin));
> - if (lvds_encoder->edid) {
> - if (drm_add_edid_modes(connector, lvds_encoder->edid)) {
> + lvds_connector->edid = drm_get_edid(connector,
> + intel_gmbus_get_adapter(dev_priv, pin));
> + if (lvds_connector->edid) {
> + if (drm_add_edid_modes(connector, lvds_connector->edid)) {
> drm_mode_connector_update_edid_property(connector,
> - lvds_encoder->edid);
> + lvds_connector->edid);
> } else {
> - kfree(lvds_encoder->edid);
> - lvds_encoder->edid = NULL;
> + kfree(lvds_connector->edid);
> + lvds_connector->edid = NULL;
> }
> }
> - if (!lvds_encoder->edid) {
> + if (!lvds_connector->edid) {
> /* Didn't get an EDID, so
> * Set wide sync ranges so we get all modes
> * handed to valid_mode for checking
> @@ -1044,8 +1044,9 @@ bool intel_lvds_init(struct drm_device *dev)
>
> list_for_each_entry(scan, &connector->probed_modes, head) {
> if (scan->type & DRM_MODE_TYPE_PREFERRED) {
> - lvds_encoder->fixed_mode = drm_mode_duplicate(dev, scan);
> - intel_find_lvds_downclock(dev, lvds_encoder->fixed_mode,
> + lvds_connector->fixed_mode = drm_mode_duplicate(dev, scan);
> + intel_find_lvds_downclock(dev,
> + lvds_connector->fixed_mode,
> connector);
> goto out;
> }
> @@ -1053,10 +1054,10 @@ bool intel_lvds_init(struct drm_device *dev)
>
> /* Failed to get EDID, what about VBT? */
> if (dev_priv->lfp_lvds_vbt_mode) {
> - lvds_encoder->fixed_mode =
> + lvds_connector->fixed_mode =
> drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
> - if (lvds_encoder->fixed_mode) {
> - lvds_encoder->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> + if (lvds_connector->fixed_mode) {
> + lvds_connector->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> goto out;
> }
> }
> @@ -1076,15 +1077,15 @@ bool intel_lvds_init(struct drm_device *dev)
> crtc = intel_get_crtc_for_pipe(dev, pipe);
>
> if (crtc && (lvds & LVDS_PORT_EN)) {
> - lvds_encoder->fixed_mode = intel_crtc_mode_get(dev, crtc);
> - if (lvds_encoder->fixed_mode) {
> - lvds_encoder->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> + lvds_connector->fixed_mode = intel_crtc_mode_get(dev, crtc);
> + if (lvds_connector->fixed_mode) {
> + lvds_connector->fixed_mode->type |= DRM_MODE_TYPE_PREFERRED;
> goto out;
> }
> }
>
> /* If we still don't have a mode after all that, give up. */
> - if (!lvds_encoder->fixed_mode)
> + if (!lvds_connector->fixed_mode)
> goto failed;
>
> out:
Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>
IMO these first 5 should go into -queued asap. They're nice cleanups
by themselves and make the code structure a lot better and more
readable.
--
Jesse Barnes, Intel Open Source Technology Center
More information about the Intel-gfx
mailing list