[Intel-gfx] [PATCH 09/10] drm/i915: flush system agent TLBs on SNB

[Ben Widawsky]

On Tue, 23 Oct 2012 07:35:48 -0700
Jesse Barnes <jbarnes at virtuousgeek.org> wrote:

> On Tue, 23 Oct 2012 16:28:53 +0200
> Daniel Vetter <daniel at ffwll.ch> wrote:
> 
> > On Tue, Oct 23, 2012 at 07:17:53AM -0700, Jesse Barnes wrote:
> > > On Mon, 22 Oct 2012 18:34:14 -0700
> > > Ben Widawsky <ben at bwidawsk.net> wrote:
> > > 
> > > > This allows us to map the PTEs WC. I've not done thorough
> > > > testing or performance measurements with this patch, but it
> > > > should be decent.
> > > > 
> > > > This is based on a patch from Jesse with the original commit
> > > > message
> > > > > I've only lightly tested this so far, but the corruption
> > > > > seems to be gone if I write the GFX_FLSH_CNTL reg after
> > > > > binding an object.  This register should control the TLB for
> > > > > the system agent, which is what CPU mapped objects will go
> > > > > through.
> > > > 
> > > > It has been updated for the new AGP-less code by me, and
> > > > included with it is feedback from the original patch.
> > > > 
> > > > CC: Jesse Barnes <jbarnes at virtuousgeek.org>
> > > > Signed-off-by: Ben Widawsky <ben at bwidawsk.net>
> > > > ---
> > > >  drivers/gpu/drm/i915/i915_gem_gtt.c | 5 +++--
> > > >  drivers/gpu/drm/i915/i915_reg.h     | 2 ++
> > > >  2 files changed, 5 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c
> > > > b/drivers/gpu/drm/i915/i915_gem_gtt.c index 16fe960..e5f0a7f
> > > > 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c
> > > > +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c
> > > > @@ -391,6 +391,7 @@ static void gen6_ggtt_bind_object(struct
> > > > drm_i915_gem_object *obj, }
> > > >  
> > > >  out:
> > > > +	I915_WRITE(GFX_FLSH_CNTL_GEN6, GFX_FLSH_CNTL_EN);
> > > >  	/* XXX: This serves as a posting read preserving the
> > > > way the old code
> > > >  	 * works. It's not clear if this is strictly necessary
> > > > or just voodoo
> > > >  	 * based on what I've tried to gather from the docs.
> > > > @@ -593,8 +594,8 @@ int i915_gem_gtt_init(struct drm_device
> > > > *dev) if (ret)
> > > >  		return ret;
> > > >  
> > > > -	dev_priv->mm.gtt->gtt = ioremap(gtt_bus_addr,
> > > > -
> > > > dev_priv->mm.gtt->gtt_total_entries * sizeof(gtt_pte_t));
> > > > +	dev_priv->mm.gtt->gtt = ioremap_wc(gtt_bus_addr,
> > > > +
> > > > dev_priv->mm.gtt->gtt_total_entries * sizeof(gtt_pte_t)); 
> > > >  	/* GMADR is the PCI aperture used by SW to access
> > > > tiled GFX surfaces in a linear fashion. */
> > > > DRM_DEBUG_DRIVER("GMADR size = %dM\n",
> > > > dev_priv->mm.gtt->gtt_mappable_entries >> 8); diff --git
> > > > a/drivers/gpu/drm/i915/i915_reg.h
> > > > b/drivers/gpu/drm/i915/i915_reg.h index 1d54328..e8c578f 100644
> > > > --- a/drivers/gpu/drm/i915/i915_reg.h +++
> > > > b/drivers/gpu/drm/i915/i915_reg.h @@ -683,6 +683,8 @@ #define
> > > > CM0_RC_OP_FLUSH_DISABLE (1<<0) #define BB_ADDR
> > > > 0x02140 /* 8 bytes */ #define GFX_FLSH_CNTL	0x02170 /*
> > > > 915+ only */ +#define GFX_FLSH_CNTL_GEN6	0x101008
> > > > +#define   GFX_FLSH_CNTL_EN	(1<<0)
> > > >  #define ECOSKPD		0x021d0
> > > >  #define   ECO_GATING_CX_ONLY	(1<<3)
> > > >  #define   ECO_FLIP_DONE		(1<<0)
> > > 
> > > Looks good.  Has anyone tried this on gen3-5?
> > 
> > pre-gen6 still use the intel_gtt code, since we need to for the next
> > decade or so to keep ums (and crappy xvmc on gen3) going.
> 
> Flush needs to happen somewhere though...
> 

I thought pre-gen6 was working already?