[Intel-gfx] [PATCH 13/18] drm/i915: implement workaround for VTOTAL when using TRANSCODER_EDP

[Daniel Vetter]

On Tue, Oct 23, 2012 at 06:30:03PM -0200, Paulo Zanoni wrote:
> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
> 
> See the documentation for the DDI_FUNC_CTL register, EDP Input Select
> bits: when the EDP input selection is B, the VTOTAL_B must be
> programmed with the VTOTAL_EDP value, same thing for selection C.
> 
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 1b72f36..b7e7814 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4524,6 +4524,17 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
>  		   (adjusted_mode->crtc_vsync_start - 1) |
>  		   ((adjusted_mode->crtc_vsync_end - 1) << 16));
>  
> +	/* Workaround: when the EDP input selection is B, the VTOTAL_B must be
> +	 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
> +	 * documented on the DDI_FUNC_CTL register description, EDP Input Select
> +	 * bits. */
> +	if (IS_HASWELL(dev) && cpu_transcoder == TRANSCODER_EDP &&
> +	    (pipe == PIPE_B || pipe == PIPE_C)) {
> +		I915_WRITE(VTOTAL(pipe),
> +			   (adjusted_mode->crtc_vdisplay - 1) |
> +			   ((adjusted_mode->crtc_vtotal - 1) << 16));

Tiny bikeshed: I'd prefer I915_WRITE(VTOTAL(pipe),
				     I915_READ(VTOTAL(cpu_transcoder));

since that makes it really clear that we're filling in the same value. We
have the same pattern already in the code, e.g. for the pch transcoder
stuff.
-Daniel

> +	}
> +
>  	/* pipesrc controls the size that is scaled from, which should
>  	 * always be the user's requested size.
>  	 */
> -- 
> 1.7.11.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch