[Intel-gfx] [PATCH 02-2/18] drm/i915: fix checks inside haswell_crtc_{enable, disable}

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni at intel.com>

These functions were forked from their Ironlake versions, so now fix
the gen checks to reflect the fact that they will only run on Haswell.

It is worth noticing that we are not considering IBX/CPT possible on
Haswell anymore. So far on Haswell enablement we kept trying to still
consider IBX/CPT as a possibility with a Haswell CPU, but this was
never tested, I really doubt it will work with the current code and we
don't really have plans to support it. Future patches will remove the
IBX/CPT code from other Haswell functions. Notice that we still have a
WARN on haswell_crtc_mode_set in case we detect non-LPT PCH.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 59 +++++-------------------------------
 1 file changed, 7 insertions(+), 52 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e5dc22c..a90da35 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3283,7 +3283,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
-	u32 temp;
 	bool is_pch_port;
 
 	WARN_ON(!crtc->enabled);
@@ -3294,12 +3293,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	intel_crtc->active = true;
 	intel_update_watermarks(dev);
 
-	if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
-		temp = I915_READ(PCH_LVDS);
-		if ((temp & LVDS_PORT_EN) == 0)
-			I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN);
-	}
-
 	is_pch_port = intel_crtc_driving_pch(crtc);
 
 	if (is_pch_port) {
@@ -3313,12 +3306,10 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 		if (encoder->pre_enable)
 			encoder->pre_enable(encoder);
 
-	if (IS_HASWELL(dev))
-		intel_ddi_enable_pipe_clock(intel_crtc);
+	intel_ddi_enable_pipe_clock(intel_crtc);
 
-	/* Enable panel fitting for LVDS */
-	if (dev_priv->pch_pf_size &&
-	    (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) {
+	/* Enable panel fitting for eDP */
+	if (dev_priv->pch_pf_size && HAS_eDP) {
 		/* Force use of hard-coded filter coefficients
 		 * as some pre-programmed values are broken,
 		 * e.g. x201.
@@ -3334,10 +3325,8 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	 */
 	intel_crtc_load_lut(crtc);
 
-	if (IS_HASWELL(dev)) {
-		intel_ddi_set_pipe_settings(crtc);
-		intel_ddi_enable_pipe_func(crtc);
-	}
+	intel_ddi_set_pipe_settings(crtc);
+	intel_ddi_enable_pipe_func(crtc);
 
 	intel_enable_pipe(dev_priv, pipe, is_pch_port);
 	intel_enable_plane(dev_priv, plane, pipe);
@@ -3354,9 +3343,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc)
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		encoder->enable(encoder);
 
-	if (HAS_PCH_CPT(dev))
-		intel_cpt_verify_modeset(dev, intel_crtc->pipe);
-
 	/*
 	 * There seems to be a race in PCH platform hw (at least on some
 	 * outputs) where an enabled pipe still completes any pageflip right
@@ -3456,8 +3442,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 	struct intel_encoder *encoder;
 	int pipe = intel_crtc->pipe;
 	int plane = intel_crtc->plane;
-	u32 reg, temp;
-
 
 	if (!intel_crtc->active)
 		return;
@@ -3476,15 +3460,13 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 
 	intel_disable_pipe(dev_priv, pipe);
 
-	if (IS_HASWELL(dev))
-		intel_ddi_disable_pipe_func(dev_priv, pipe);
+	intel_ddi_disable_pipe_func(dev_priv, pipe);
 
 	/* Disable PF */
 	I915_WRITE(PF_CTL(pipe), 0);
 	I915_WRITE(PF_WIN_SZ(pipe), 0);
 
-	if (IS_HASWELL(dev))
-		intel_ddi_disable_pipe_clock(intel_crtc);
+	intel_ddi_disable_pipe_clock(intel_crtc);
 
 	for_each_encoder_on_crtc(dev, crtc, encoder)
 		if (encoder->post_disable)
@@ -3494,33 +3476,6 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
 
 	intel_disable_transcoder(dev_priv, pipe);
 
-	if (HAS_PCH_CPT(dev)) {
-		/* disable TRANS_DP_CTL */
-		reg = TRANS_DP_CTL(pipe);
-		temp = I915_READ(reg);
-		temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK);
-		temp |= TRANS_DP_PORT_SEL_NONE;
-		I915_WRITE(reg, temp);
-
-		/* disable DPLL_SEL */
-		temp = I915_READ(PCH_DPLL_SEL);
-		switch (pipe) {
-		case 0:
-			temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL);
-			break;
-		case 1:
-			temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL);
-			break;
-		case 2:
-			/* C shares PLL A or B */
-			temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL);
-			break;
-		default:
-			BUG(); /* wtf */
-		}
-		I915_WRITE(PCH_DPLL_SEL, temp);
-	}
-
 	/* disable PCH DPLL */
 	intel_disable_pch_pll(intel_crtc);
 
-- 
1.7.11.4