[Intel-gfx] [PATCH] drm/i915: Fix primary plane offset on HSW

[Damien Lespiau]

From: Damien Lespiau <damien.lespiau at intel.com>

Haswell consolidates DSP_TILEOFF and DSP_LINOFF into DSP_OFFSET (aka
PRI_OFFSET).

Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h      | 3 +++
 drivers/gpu/drm/i915/intel_display.c | 8 ++++++--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9995209..34ce142 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3070,6 +3070,7 @@
 #define _DSPASIZE		0x70190
 #define _DSPASURF		0x7019C /* 965+ only */
 #define _DSPATILEOFF		0x701A4 /* 965+ only */
+#define _DSPAOFFSET		0x701A4 /* HSW */
 
 #define DSPCNTR(plane) _PIPE(plane, _DSPACNTR, _DSPBCNTR)
 #define DSPADDR(plane) _PIPE(plane, _DSPAADDR, _DSPBADDR)
@@ -3079,6 +3080,7 @@
 #define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF)
 #define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF)
 #define DSPLINOFF(plane) DSPADDR(plane)
+#define DSPOFFSET(plane) _PIPE(plane, _DSPAOFFSET, _DSPBOFFSET)
 
 /* Display/Sprite base address macros */
 #define DISP_BASEADDR_MASK	(0xfffff000)
@@ -3124,6 +3126,7 @@
 #define _DSPBSIZE		0x71190
 #define _DSPBSURF		0x7119C
 #define _DSPBTILEOFF		0x711A4
+#define _DSPBOFFSET		0x711A4
 
 /* Sprite A control */
 #define _DVSACNTR		0x72180
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index f3fc1ff..120866d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2114,8 +2114,12 @@ static int ironlake_update_plane(struct drm_crtc *crtc,
 	I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
 	I915_MODIFY_DISPBASE(DSPSURF(plane),
 			     obj->gtt_offset + intel_crtc->dspaddr_offset);
-	I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
-	I915_WRITE(DSPLINOFF(plane), linear_offset);
+	if (IS_HASWELL(dev)) {
+		I915_WRITE(DSPOFFSET(plane), (y << 16) | x);
+	} else {
+		I915_WRITE(DSPTILEOFF(plane), (y << 16) | x);
+		I915_WRITE(DSPLINOFF(plane), linear_offset);
+	}
 	POSTING_READ(reg);
 
 	return 0;
-- 
1.7.11.7