[Intel-gfx] [PATCH 24/36] drm/i915: fork lpt version of ironlake_{en, dis}able_pch_transcoder
Paulo Zanoni
przanoni at gmail.com
Wed Oct 31 21:12:43 CET 2012
From: Paulo Zanoni <paulo.r.zanoni at intel.com>
For now the new functions are just copies. Differences will be added
later.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 77 +++++++++++++++++++++++++++++++++++-
1 file changed, 75 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 50c8848..066eb27 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1721,6 +1721,57 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv,
DRM_ERROR("failed to enable transcoder %d\n", pipe);
}
+static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ int reg;
+ u32 val, pipeconf_val;
+ struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe];
+
+ /* PCH only available on ILK+ */
+ BUG_ON(dev_priv->info->gen < 5);
+
+ /* Make sure PCH DPLL is enabled */
+ assert_pch_pll_enabled(dev_priv,
+ to_intel_crtc(crtc)->pch_pll,
+ to_intel_crtc(crtc));
+
+ /* FDI must be feeding us bits for PCH ports */
+ assert_fdi_tx_enabled(dev_priv, pipe);
+ assert_fdi_rx_enabled(dev_priv, pipe);
+
+ if (IS_HASWELL(dev_priv->dev) && pipe > 0) {
+ DRM_ERROR("Attempting to enable transcoder on Haswell with pipe > 0\n");
+ return;
+ }
+ reg = TRANSCONF(pipe);
+ val = I915_READ(reg);
+ pipeconf_val = I915_READ(PIPECONF(pipe));
+
+ if (HAS_PCH_IBX(dev_priv->dev)) {
+ /*
+ * make the BPC in transcoder be consistent with
+ * that in pipeconf reg.
+ */
+ val &= ~PIPE_BPC_MASK;
+ val |= pipeconf_val & PIPE_BPC_MASK;
+ }
+
+ val &= ~TRANS_INTERLACE_MASK;
+ if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK)
+ if (HAS_PCH_IBX(dev_priv->dev) &&
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO))
+ val |= TRANS_LEGACY_INTERLACED_ILK;
+ else
+ val |= TRANS_INTERLACED;
+ else
+ val |= TRANS_PROGRESSIVE;
+
+ I915_WRITE(reg, val | TRANS_ENABLE);
+ if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100))
+ DRM_ERROR("failed to enable transcoder %d\n", pipe);
+}
+
static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
@@ -1743,6 +1794,28 @@ static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
DRM_ERROR("failed to disable transcoder %d\n", pipe);
}
+static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ int reg;
+ u32 val;
+
+ /* FDI relies on the transcoder */
+ assert_fdi_tx_disabled(dev_priv, pipe);
+ assert_fdi_rx_disabled(dev_priv, pipe);
+
+ /* Ports must be off as well */
+ assert_pch_ports_disabled(dev_priv, pipe);
+
+ reg = TRANSCONF(pipe);
+ val = I915_READ(reg);
+ val &= ~TRANS_ENABLE;
+ I915_WRITE(reg, val);
+ /* wait for PCH transcoder off, transcoder state */
+ if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50))
+ DRM_ERROR("failed to disable transcoder %d\n", pipe);
+}
+
/**
* intel_enable_pipe - enable a pipe, asserting requirements
* @dev_priv: i915 private structure
@@ -3154,7 +3227,7 @@ static void lpt_pch_enable(struct drm_crtc *crtc)
I915_WRITE(_TRANS_VSYNC_A, I915_READ(VSYNC(cpu_transcoder)));
I915_WRITE(_TRANS_VSYNCSHIFT_A, I915_READ(VSYNCSHIFT(cpu_transcoder)));
- ironlake_enable_pch_transcoder(dev_priv, intel_crtc->pipe);
+ lpt_enable_pch_transcoder(dev_priv, intel_crtc->pipe);
}
static void intel_put_pch_pll(struct intel_crtc *intel_crtc)
@@ -3548,7 +3621,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc)
encoder->post_disable(encoder);
if (is_pch_port) {
- ironlake_disable_pch_transcoder(dev_priv, pipe);
+ lpt_disable_pch_transcoder(dev_priv, pipe);
intel_disable_pch_pll(intel_crtc);
intel_ddi_fdi_disable(crtc);
}
--
1.7.11.4
More information about the Intel-gfx
mailing list