[Intel-gfx] [PATCH 6/7] drm/i915: Show render P state thresholds in sysfs

[Jesse Barnes]

On Thu,  6 Sep 2012 13:54:09 -0700
Ben Widawsky <ben at bwidawsk.net> wrote:

> This is useful for userspace utilities which wish to use the previous
> interface, specifically for micromanaging the increase/decrease steps by
> setting min == max.
> 
> CC: Jacob Pan <jacob.jun.pan at linux.intel.com>
> CC: Jesse Barnes <jbarnes at virtuousgeek.org>
> Signed-off-by: Ben Widawsky <ben at bwidawsk.net>
> ---
>  drivers/gpu/drm/i915/i915_sysfs.c | 36 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_sysfs.c b/drivers/gpu/drm/i915/i915_sysfs.c
> index 5a5e610..e3a31ae 100644
> --- a/drivers/gpu/drm/i915/i915_sysfs.c
> +++ b/drivers/gpu/drm/i915/i915_sysfs.c
> @@ -333,10 +333,46 @@ static DEVICE_ATTR(gt_cur_freq_mhz, S_IRUGO, gt_cur_freq_mhz_show, NULL);
>  static DEVICE_ATTR(gt_max_freq_mhz, S_IRUGO | S_IWUSR, gt_max_freq_mhz_show, gt_max_freq_mhz_store);
>  static DEVICE_ATTR(gt_min_freq_mhz, S_IRUGO | S_IWUSR, gt_min_freq_mhz_show, gt_min_freq_mhz_store);
>  
> +
> +static ssize_t gt_rp_mhz_show(struct device *kdev, struct device_attribute *attr, char *buf);
> +static DEVICE_ATTR(gt_RP0_freq_mhz, S_IRUGO, gt_rp_mhz_show, NULL);
> +static DEVICE_ATTR(gt_RP1_freq_mhz, S_IRUGO, gt_rp_mhz_show, NULL);
> +static DEVICE_ATTR(gt_RPn_freq_mhz, S_IRUGO, gt_rp_mhz_show, NULL);
> +
> +/* For now we have a static number of RP states */
> +static ssize_t gt_rp_mhz_show(struct device *kdev, struct device_attribute *attr, char *buf)
> +{
> +	struct drm_minor *minor = container_of(kdev, struct drm_minor, kdev);
> +	struct drm_device *dev = minor->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 val, rp_state_cap;
> +	ssize_t ret;
> +
> +	ret = mutex_lock_interruptible(&dev->struct_mutex);
> +	if (ret)
> +		return ret;
> +	rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
> +	mutex_unlock(&dev->struct_mutex);
> +
> +	if (attr == &dev_attr_gt_RP0_freq_mhz) {
> +		val = ((rp_state_cap & 0x0000ff) >> 0) * GT_FREQUENCY_MULTIPLIER;
> +	} else if (attr == &dev_attr_gt_RP1_freq_mhz) {
> +		val = ((rp_state_cap & 0x00ff00) >> 8) * GT_FREQUENCY_MULTIPLIER;
> +	} else if (attr == &dev_attr_gt_RPn_freq_mhz) {
> +		val = ((rp_state_cap & 0xff0000) >> 16) * GT_FREQUENCY_MULTIPLIER;
> +	} else {
> +		BUG();
> +	}
> +	return snprintf(buf, PAGE_SIZE, "%d", val);
> +}
> +
>  static const struct attribute *gen6_attrs[] = {
>  	&dev_attr_gt_cur_freq_mhz.attr,
>  	&dev_attr_gt_max_freq_mhz.attr,
>  	&dev_attr_gt_min_freq_mhz.attr,
> +	&dev_attr_gt_RP0_freq_mhz.attr,
> +	&dev_attr_gt_RP1_freq_mhz.attr,
> +	&dev_attr_gt_RPn_freq_mhz.attr,
>  	NULL,
>  };
>  

If you add documentation:
Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>

-- 
Jesse Barnes, Intel Open Source Technology Center