[Intel-gfx] [PATCH 5/5] drm/i915: extract intel_set_pipe_timings from crtc_mode_set
Rodrigo Vivi
rodrigo.vivi at gmail.com
Tue Sep 25 01:53:47 CEST 2012
what about
pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;?
isn't this useful anymore? in this case I think it would be better
split this patch in 2: 1 to remove it and another one to organize the
functions.
On Thu, Sep 20, 2012 at 6:36 PM, Paulo Zanoni <przanoni at gmail.com> wrote:
> From: Paulo Zanoni <paulo.r.zanoni at intel.com>
>
> Version 2: call intel_set_pipe_timings from both i9xx_crtc_mode_set
> and ironlake_crtc_mode_set, instead of just ironlake, as requested by
> Daniel Vetter.
>
> The problem caused by calling this function from i9xx_crtc_mode_set too
> is that now on i9xx we write to PIPESRC before writing to DSPSIZE and
> DSPPOS. I could not find any evidence in our documentation that this
> won't work, and the docs actually say the pipe registers should be set
> before the plane registers.
>
> Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
> ---
> drivers/gpu/drm/i915/intel_display.c | 127 ++++++++++++++--------------------
> 1 file changed, 52 insertions(+), 75 deletions(-)
>
>
> Untested on i9xx. Needs a few tested-by stamps.
>
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index c402774..50b58a5 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4250,6 +4250,55 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
> I915_WRITE(DPLL(pipe), dpll);
> }
>
> +static void intel_set_pipe_timings(struct intel_crtc *intel_crtc,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + struct drm_device *dev = intel_crtc->base.dev;
> + struct drm_i915_private *dev_priv = dev->dev_private;
> + enum pipe pipe = intel_crtc->pipe;
> + uint32_t vsyncshift;
> +
> + if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
> + /* the chip adds 2 halflines automatically */
> + adjusted_mode->crtc_vtotal -= 1;
> + adjusted_mode->crtc_vblank_end -= 1;
> + vsyncshift = adjusted_mode->crtc_hsync_start
> + - adjusted_mode->crtc_htotal / 2;
> + } else {
> + vsyncshift = 0;
> + }
> +
> + if (INTEL_INFO(dev)->gen > 3)
> + I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
> +
> + I915_WRITE(HTOTAL(pipe),
> + (adjusted_mode->crtc_hdisplay - 1) |
> + ((adjusted_mode->crtc_htotal - 1) << 16));
> + I915_WRITE(HBLANK(pipe),
> + (adjusted_mode->crtc_hblank_start - 1) |
> + ((adjusted_mode->crtc_hblank_end - 1) << 16));
> + I915_WRITE(HSYNC(pipe),
> + (adjusted_mode->crtc_hsync_start - 1) |
> + ((adjusted_mode->crtc_hsync_end - 1) << 16));
> +
> + I915_WRITE(VTOTAL(pipe),
> + (adjusted_mode->crtc_vdisplay - 1) |
> + ((adjusted_mode->crtc_vtotal - 1) << 16));
> + I915_WRITE(VBLANK(pipe),
> + (adjusted_mode->crtc_vblank_start - 1) |
> + ((adjusted_mode->crtc_vblank_end - 1) << 16));
> + I915_WRITE(VSYNC(pipe),
> + (adjusted_mode->crtc_vsync_start - 1) |
> + ((adjusted_mode->crtc_vsync_end - 1) << 16));
> +
> + /* pipesrc controls the size that is scaled from, which should
> + * always be the user's requested size.
> + */
> + I915_WRITE(PIPESRC(pipe),
> + ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
> +}
> +
> static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> struct drm_display_mode *mode,
> struct drm_display_mode *adjusted_mode,
> @@ -4263,7 +4312,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> int plane = intel_crtc->plane;
> int refclk, num_connectors = 0;
> intel_clock_t clock, reduced_clock;
> - u32 dspcntr, pipeconf, vsyncshift;
> + u32 dspcntr, pipeconf;
> bool ok, has_reduced_clock = false, is_sdvo = false;
> bool is_lvds = false, is_tv = false, is_dp = false;
> struct intel_encoder *encoder;
> @@ -4388,42 +4437,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> }
> }
>
> - pipeconf &= ~PIPECONF_INTERLACE_MASK;
> - if (!IS_GEN2(dev) &&
> - adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
> - pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
> - /* the chip adds 2 halflines automatically */
> - adjusted_mode->crtc_vtotal -= 1;
> - adjusted_mode->crtc_vblank_end -= 1;
> - vsyncshift = adjusted_mode->crtc_hsync_start
> - - adjusted_mode->crtc_htotal/2;
> - } else {
> - pipeconf |= PIPECONF_PROGRESSIVE;
> - vsyncshift = 0;
> - }
> -
> - if (!IS_GEN3(dev))
> - I915_WRITE(VSYNCSHIFT(pipe), vsyncshift);
> -
> - I915_WRITE(HTOTAL(pipe),
> - (adjusted_mode->crtc_hdisplay - 1) |
> - ((adjusted_mode->crtc_htotal - 1) << 16));
> - I915_WRITE(HBLANK(pipe),
> - (adjusted_mode->crtc_hblank_start - 1) |
> - ((adjusted_mode->crtc_hblank_end - 1) << 16));
> - I915_WRITE(HSYNC(pipe),
> - (adjusted_mode->crtc_hsync_start - 1) |
> - ((adjusted_mode->crtc_hsync_end - 1) << 16));
> -
> - I915_WRITE(VTOTAL(pipe),
> - (adjusted_mode->crtc_vdisplay - 1) |
> - ((adjusted_mode->crtc_vtotal - 1) << 16));
> - I915_WRITE(VBLANK(pipe),
> - (adjusted_mode->crtc_vblank_start - 1) |
> - ((adjusted_mode->crtc_vblank_end - 1) << 16));
> - I915_WRITE(VSYNC(pipe),
> - (adjusted_mode->crtc_vsync_start - 1) |
> - ((adjusted_mode->crtc_vsync_end - 1) << 16));
> + intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
>
> /* pipesrc and dspsize control the size that is scaled from,
> * which should always be the user's requested size.
> @@ -4432,8 +4446,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
> ((mode->vdisplay - 1) << 16) |
> (mode->hdisplay - 1));
> I915_WRITE(DSPPOS(plane), 0);
> - I915_WRITE(PIPESRC(pipe),
> - ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
>
> I915_WRITE(PIPECONF(pipe), pipeconf);
> POSTING_READ(PIPECONF(pipe));
> @@ -5039,42 +5051,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
> }
> }
>
> - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
> - /* the chip adds 2 halflines automatically */
> - adjusted_mode->crtc_vtotal -= 1;
> - adjusted_mode->crtc_vblank_end -= 1;
> - I915_WRITE(VSYNCSHIFT(pipe),
> - adjusted_mode->crtc_hsync_start
> - - adjusted_mode->crtc_htotal/2);
> - } else {
> - I915_WRITE(VSYNCSHIFT(pipe), 0);
> - }
> -
> - I915_WRITE(HTOTAL(pipe),
> - (adjusted_mode->crtc_hdisplay - 1) |
> - ((adjusted_mode->crtc_htotal - 1) << 16));
> - I915_WRITE(HBLANK(pipe),
> - (adjusted_mode->crtc_hblank_start - 1) |
> - ((adjusted_mode->crtc_hblank_end - 1) << 16));
> - I915_WRITE(HSYNC(pipe),
> - (adjusted_mode->crtc_hsync_start - 1) |
> - ((adjusted_mode->crtc_hsync_end - 1) << 16));
> -
> - I915_WRITE(VTOTAL(pipe),
> - (adjusted_mode->crtc_vdisplay - 1) |
> - ((adjusted_mode->crtc_vtotal - 1) << 16));
> - I915_WRITE(VBLANK(pipe),
> - (adjusted_mode->crtc_vblank_start - 1) |
> - ((adjusted_mode->crtc_vblank_end - 1) << 16));
> - I915_WRITE(VSYNC(pipe),
> - (adjusted_mode->crtc_vsync_start - 1) |
> - ((adjusted_mode->crtc_vsync_end - 1) << 16));
> -
> - /* pipesrc controls the size that is scaled from, which should
> - * always be the user's requested size.
> - */
> - I915_WRITE(PIPESRC(pipe),
> - ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1));
> + intel_set_pipe_timings(intel_crtc, mode, adjusted_mode);
>
> ironlake_set_m_n(crtc, mode, adjusted_mode);
>
> --
> 1.7.10.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Rodrigo Vivi
Blog: http://blog.vivi.eng.br
More information about the Intel-gfx
mailing list