[Intel-gfx] [PATCH 6/9] drm/i915: Add eDP support for Valleyview

[Vijay Purushothaman]

On 9/26/2012 8:19 PM, Daniel Vetter wrote:
> On Wed, Sep 26, 2012 at 04:31:46PM +0200, Daniel Vetter wrote:
>> On Wed, Sep 26, 2012 at 07:07:35PM +0530, Vijay Purushothaman wrote:
>>> Eventhough Valleyview display block is derived from Cantiga, VLV
>>> supports eDP. So, added eDP checks in i9xx_crtc_mode_set path.
>>>
>>> v2: use different DPIO_DIVISOR values for VGA, DP and eDP
>>> v3: fix DPIO value calculation to use same values for all display
>>> 	interfaces
>>>
>>> Signed-off-by: Gajanan Bhat <gajanan.bhat at intel.com>
>>> Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
>>> Signed-off-by: Ben Widawsky <benjamin.widawsky at intel.com>
>>> ---
>>>   drivers/gpu/drm/i915/intel_display.c |    6 ++++++
>>>   drivers/gpu/drm/i915/intel_dp.c      |   13 ++++++++-----
>>>   2 files changed, 14 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>>> index a8a81d1..aee6151 100644
>>> --- a/drivers/gpu/drm/i915/intel_display.c
>>> +++ b/drivers/gpu/drm/i915/intel_display.c
>>> @@ -4405,6 +4405,12 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
>>>   		}
>>>   	}
>>>
>>> +	if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) {
>>> +		pipeconf |= PIPECONF_BPP_6 |
>>> +			PIPECONF_ENABLE |
>>> +			I965_PIPECONF_ACTIVE;
>>> +	}
>>
>> No.
>>
>> Jani Nikula and me just figured out that we have a giant mess with 6bpc
>> dithering on DP outputs, but unconditionally enabling 6bpc on vlv eDP only
>> papers over issues.
>
> Forgotten to put Jani on cc.
> -Daniel

Thanks for the catch. I've removed this unconditional enabling of 6bpc 
for VLV eDP. For long term i believe, eDP handling in i9xx_crtc_mode_set 
should be changed along the lines of ironlake_crtc_mode_set for cleaner 
code. For now, this should unblock others with VLV enabling.

>
>>
>>> +
>>>   	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
>>>   	drm_mode_debug_printmodeline(mode);
>>>
>>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>>> index c111c3f..af57027 100644
>>> --- a/drivers/gpu/drm/i915/intel_dp.c
>>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>>> @@ -885,7 +885,7 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
>>>
>>>   	/* Split out the IBX/CPU vs CPT settings */
>>>
>>> -	if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
>>> +	if (is_cpu_edp(intel_dp) && IS_GEN7(dev) && !IS_VALLEYVIEW(dev)) {
>>>   		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
>>>   			intel_dp->DP |= DP_SYNC_HS_HIGH;
>>>   		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
>>> @@ -1474,7 +1474,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
>>>   {
>>>   	struct drm_device *dev = intel_dp->base.base.dev;
>>>
>>> -	if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
>>> +	if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
>>>   		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
>>>   		case DP_TRAIN_VOLTAGE_SWING_400:
>>>   			return DP_TRAIN_PRE_EMPHASIS_6;
>>> @@ -1773,7 +1773,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
>>>   		uint32_t    signal_levels;
>>>
>>>
>>> -		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
>>> +		if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
>>>   			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
>>>   			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
>>>   		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
>>> @@ -1859,7 +1859,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
>>>   			break;
>>>   		}
>>>
>>> -		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
>>> +		if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
>>>   			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
>>>   			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
>>>   		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
>>> @@ -2471,7 +2471,10 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
>>>   		if (intel_dpd_is_edp(dev))
>>>   			intel_dp->is_pch_edp = true;
>>>
>>> -	if (output_reg == DP_A || is_pch_edp(intel_dp)) {
>>> +	if (IS_VALLEYVIEW(dev) && output_reg == DP_C) {
>>> +		type = DRM_MODE_CONNECTOR_eDP;
>>> +		intel_encoder->type = INTEL_OUTPUT_EDP;
>>
>> You need to be a notch more careful, since since
>>
>> commit cb0953d734348e8862d6d7edc666cfb3bf6d8fae
>> Author: Adam Jackson <ajax at redhat.com>
>> Date:   Fri Jul 16 14:46:29 2010 -0400
>>
>>      drm/i915: Initialize LVDS and eDP outputs before anything else
>>
>> We initialize built-in panels before external outputs. Hence you need to
>> adjust intel_setup_outputs for vlv eDP, too, so that the eDP output comes
>> first. A bit a mess, I know.

I've changed the detection order in intel_setup_outputs for valleyview. 
In intel_dp_init, I have added a comment to fix this in next patch series.

Thanks,
Vijay

>>
>> Cheers, Daniel
>>
>>> +	} else if (output_reg == DP_A || is_pch_edp(intel_dp)) {
>>>   		type = DRM_MODE_CONNECTOR_eDP;
>>>   		intel_encoder->type = INTEL_OUTPUT_EDP;
>>>   	} else {
>>> --
>>> 1.7.9.5
>>>
>>> _______________________________________________
>>> Intel-gfx mailing list
>>> Intel-gfx at lists.freedesktop.org
>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>>
>> --
>> Daniel Vetter
>> Software Engineer, Intel Corporation
>> +41 (0) 79 365 57 48 - http://blog.ffwll.ch
>