[Intel-gfx] [PATCH v2 6/9] drm/i915: Enable DisplayPort in Valleyview
Vijay Purushothaman
vijay.a.purushothaman at intel.com
Thu Sep 27 15:43:06 CEST 2012
In valleyview voltageswing, pre-emphasis and lane control registers can
be programmed only through the h/w side band fabric.
Cleaned up DPLL calculations for Valleyview to support multi display
configurations.
v2: Based on Daniel's feedbacak, moved crt hotplug detect work around as separate
patch. Also moved i9xx_update_pll_dividers to i8xx_update_pll and
i9xx_update_pll.
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
Signed-off-by: Gajanan Bhat <gajanan.bhat at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 8 +--
drivers/gpu/drm/i915/intel_display.c | 90 ++++++++++++++++++++++++----------
2 files changed, 66 insertions(+), 32 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3f75ee6..0fe4aad 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -385,12 +385,8 @@
#define DPIO_FASTCLK_DISABLE 0x8100
-#define _DPIO_DATA_LANE0 0x0220
-#define _DPIO_DATA_LANE1 0x0420
-#define _DPIO_DATA_LANE2 0x2620
-#define _DPIO_DATA_LANE3 0x2820
-#define DPIO_DATA_LANE_A(pipe) _PIPE(pipe, _DPIO_DATA_LANE0, _DPIO_DATA_LANE2)
-#define DPIO_DATA_LANE_B(pipe) _PIPE(pipe, _DPIO_DATA_LANE1, _DPIO_DATA_LANE3)
+#define DPIO_DATA_CHANNEL1 0x8220
+#define DPIO_DATA_CHANNEL2 0x8420
/*
* Fence registers
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 68828e7..ed749c4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4017,7 +4017,7 @@ static void vlv_update_pll(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
intel_clock_t *clock, intel_clock_t *reduced_clock,
- int refclk, int num_connectors)
+ int num_connectors)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4025,9 +4025,19 @@ static void vlv_update_pll(struct drm_crtc *crtc,
int pipe = intel_crtc->pipe;
u32 dpll, mdiv, pdiv;
u32 bestn, bestm1, bestm2, bestp1, bestp2;
- bool is_hdmi;
+ bool is_sdvo;
+ u32 temp;
+
+ is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
+ intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
- is_hdmi = intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
+ dpll = DPLL_VGA_MODE_DIS;
+ dpll |= DPLL_EXT_BUFFER_ENABLE_VLV;
+ dpll |= DPLL_REFA_CLK_ENABLE_VLV;
+ dpll |= DPLL_INTEGRATED_CLOCK_VLV;
+
+ I915_WRITE(DPLL(pipe), dpll);
+ POSTING_READ(DPLL(pipe));
bestn = clock->n;
bestm1 = clock->m1;
@@ -4035,12 +4045,10 @@ static void vlv_update_pll(struct drm_crtc *crtc,
bestp1 = clock->p1;
bestp2 = clock->p2;
- /* Enable DPIO clock input */
- dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
- DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
- I915_WRITE(DPLL(pipe), dpll);
- POSTING_READ(DPLL(pipe));
-
+ /*
+ * In Valleyview PLL and program lane counter registers are exposed
+ * through DPIO interface
+ */
mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
mdiv |= ((bestn << DPIO_N_SHIFT));
@@ -4051,12 +4059,13 @@ static void vlv_update_pll(struct drm_crtc *crtc,
intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000);
- pdiv = DPIO_REFSEL_OVERRIDE | (5 << DPIO_PLL_MODESEL_SHIFT) |
+ pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) |
(3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) |
- (8 << DPIO_DRIVER_CTL_SHIFT) | (5 << DPIO_CLK_BIAS_CTL_SHIFT);
+ (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) |
+ (5 << DPIO_CLK_BIAS_CTL_SHIFT);
intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv);
- intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x009f0051);
+ intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b);
dpll |= DPLL_VCO_ENABLE;
I915_WRITE(DPLL(pipe), dpll);
@@ -4064,21 +4073,47 @@ static void vlv_update_pll(struct drm_crtc *crtc,
if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1))
DRM_ERROR("DPLL %d failed to lock\n", pipe);
- if (is_hdmi) {
- u32 temp = intel_mode_get_pixel_multiplier(adjusted_mode);
+ intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620);
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT))
+ intel_dp_set_m_n(crtc, mode, adjusted_mode);
+
+ I915_WRITE(DPLL(pipe), dpll);
+
+ /* Wait for the clocks to stabilize. */
+ POSTING_READ(DPLL(pipe));
+ udelay(150);
+ temp = 0;
+ if (is_sdvo) {
+ temp = intel_mode_get_pixel_multiplier(adjusted_mode);
if (temp > 1)
temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
else
temp = 0;
-
- I915_WRITE(DPLL_MD(pipe), temp);
- POSTING_READ(DPLL_MD(pipe));
}
+ I915_WRITE(DPLL_MD(pipe), temp);
+ POSTING_READ(DPLL_MD(pipe));
- intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x641); /* ??? */
+ /* Now program lane control registers */
+ if(intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)
+ || intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI))
+ {
+ temp = 0x1000C4;
+ if(pipe == 1)
+ temp |= (1 << 21);
+ intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp);
+ }
+ if(intel_pipe_has_type(crtc,INTEL_OUTPUT_EDP))
+ {
+ temp = 0x1000C4;
+ if(pipe == 1)
+ temp |= (1 << 21);
+ intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp);
+ }
}
+
static void i9xx_update_pll(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
@@ -4092,9 +4127,10 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
u32 dpll;
bool is_sdvo;
+ i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+
is_sdvo = intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ||
intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI);
-
dpll = DPLL_VGA_MODE_DIS;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS))
@@ -4192,7 +4228,7 @@ static void i9xx_update_pll(struct drm_crtc *crtc,
static void i8xx_update_pll(struct drm_crtc *crtc,
struct drm_display_mode *adjusted_mode,
- intel_clock_t *clock,
+ intel_clock_t *clock, intel_clock_t *reduced_clock,
int num_connectors)
{
struct drm_device *dev = crtc->dev;
@@ -4201,6 +4237,8 @@ static void i8xx_update_pll(struct drm_crtc *crtc,
int pipe = intel_crtc->pipe;
u32 dpll;
+ i9xx_update_pll_dividers(crtc, clock, reduced_clock);
+
dpll = DPLL_VGA_MODE_DIS;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
@@ -4327,14 +4365,14 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
if (is_sdvo && is_tv)
i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
- i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
- &reduced_clock : NULL);
-
if (IS_GEN2(dev))
- i8xx_update_pll(crtc, adjusted_mode, &clock, num_connectors);
+ i8xx_update_pll(crtc, adjusted_mode, &clock,
+ has_reduced_clock ? &reduced_clock : NULL,
+ num_connectors);
else if (IS_VALLEYVIEW(dev))
- vlv_update_pll(crtc, mode,adjusted_mode, &clock, NULL,
- refclk, num_connectors);
+ vlv_update_pll(crtc, mode, adjusted_mode, &clock,
+ has_reduced_clock ? &reduced_clock : NULL,
+ num_connectors);
else
i9xx_update_pll(crtc, mode, adjusted_mode, &clock,
has_reduced_clock ? &reduced_clock : NULL,
--
1.7.9.5
More information about the Intel-gfx
mailing list